Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
RTReviewstookA clearer perspective
Printers

Printer Not Printing? 10 Fixes That Work on Windows and Mac

Printer not printing: check power, connection, queue and paper, restart devices, set the default printer, update the driver and reinstall.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

See 2 more Amazon options
Read the full guide ↓
Illustrated checks: Check the basics; Check the connection; Clear the print queue.

When a printer will not print, the cause is usually one of a handful of things: the printer is off or offline, the print queue is stuck, the connection has dropped, the wrong printer is selected, there is a paper or ink problem, or a driver has gone wrong. The fastest way to fix it is to work through those causes in order, from the simplest to the most involved. This guide does exactly that.

The steps below cover Windows and Mac. Menu names differ slightly by version and by printer brand, so use them as a map and check your printer’s manual for the exact button names.

By the Reviewstook Editorial Team. Last updated: October 31, 2026.

Illustrated checks: Check the basics; Check the connection; Clear the print queue.
Selected checks from this guide; follow the complete instructions in the article.

Step 1: Check the Obvious Things First

Most “will not print” problems are simple. Check each of these before you do anything else:

  • Power: is the printer switched on and is the power cable firmly connected? Some printers go into a deep sleep that needs a press of the power button to wake.
  • Screen messages: read any message or blinking light on the printer. A paper jam, empty tray, open cover or low-ink warning can stop printing.
  • Paper: make sure there is paper in the tray, the guides are snug and the stack is not overfilled.
  • Cables: if you use USB, re-seat the cable at both ends and try a different port. If you use Ethernet, check the link light.
  • The right printer: in the print dialog, make sure the printer you chose is the one in front of you, not an old PDF or fax printer.
In this guide

Step 2: Restart Everything in the Right Order

A restart clears many temporary glitches. Do it in this order: close the document you are printing, turn off the printer and unplug it for about 30 seconds, restart your computer, and if you use Wi-Fi restart your router. Then plug the printer back in, turn it on, wait until it finishes its start-up routine and try printing a test page.

Unplugging matters more than it sounds. Pressing the power button on many printers only puts them in standby, and the memory is not cleared until the power is removed.

Step 3: Check Whether the Printer Shows as Offline

If your computer says the printer is offline, it cannot reach it. This is one of the most common problems with wireless printers. Follow our guide to fixing a printer offline error, which explains how to wake the printer, check the network and clear the offline setting.

Step 4: Clear the Print Queue

A single stuck job can block everything behind it. Open the print queue, cancel every job and try again. In Windows, open Settings, go to Bluetooth and devices, Printers and scanners, choose your printer and open the print queue. In macOS, open System Settings, Printers and Scanners, choose your printer and open the print queue. If jobs refuse to cancel, follow our guide to clearing the print queue in Windows, which shows how to restart the print spooler.

Step 5: Check the Connection

If the printer is on and not offline, make sure it and your computer are on the same network. A printer on a guest network or a different band can be invisible to your computer. If the printer has lost Wi-Fi, see what to do when a printer will not connect to Wi-Fi and how to connect a printer to Wi-Fi. As a test, connect the printer to your computer with a USB cable. If it prints over USB but not over Wi-Fi, the problem is the network, not the printer.

Step 6: Look at Ink, Toner and Paper

Printers refuse to print when they think a cartridge is empty, missing or not recognized. Open the printer’s ink status screen or the maker’s app. Remove and reseat each cartridge, make sure the protective tape is removed from new cartridges and check for a lit warning. If you just refilled an ink tank or cartridge and the printer still says it is empty, read why a printer says out of ink after a refill. If the printer will not pick up paper, see what to do when a printer will not pick up paper. For a jam, see how to fix a paper jam.

Step 7: Update or Reinstall the Driver

A corrupted or outdated driver can stop printing even when everything else is fine. Update Windows or macOS first, then update the driver from the printer maker’s support site. If that does not help, remove the printer from your computer and add it again. Our guide to updating a printer driver shows the steps.

Step 8: Check for Blank or Faint Output

If pages come out but they are blank, streaky or faint, the printer is working but the printhead may be clogged. See why a printer prints blank pages, why prints are blurry or streaky and how to clean a printhead.

Step 9: Last Resorts

If nothing has worked, you can try a factory reset, which returns the printer’s settings to their defaults. Read how to reset a printer to factory settings first, because a reset erases Wi-Fi settings and you will need to set the printer up again. If the printer still will not print, contact the manufacturer, particularly if it is under warranty.

Keeping the Problem From Coming Back

  • Turn the printer on at least once a week and print a test page so inkjet nozzles stay clear.
  • Give the printer a fixed spot near the router, or reserve an IP address for it in the router settings.
  • Install updates for your operating system and the printer firmware.
  • Use paper that matches the printer’s specifications and keep it dry.
  • Replace cartridges promptly and use the cartridge type the printer expects.

Sorting the Problem: Does It Fail Everywhere or Only Sometimes?

Before you try more fixes, narrow the problem with three quick questions. Each answer removes whole groups of causes.

  • Does a test page from the printer itself print? If yes, the printer hardware works and the fault lies in the connection, computer or software.
  • Does it fail from every device or only one? If only one computer fails, look at that computer’s driver, port or settings.
  • Did it ever work? A printer that never worked points to setup, while one that stopped recently points to a change such as an update, a new router or a new cartridge.

Write down the answers. They guide you through the rest of the guide faster than trying each step in order, and they give a support agent exactly what they need if you call.

Reading Error Lights and Messages

Printers communicate through lights, beeps and messages on a small screen or in the computer’s status window. A steady light usually means ready or powered, a blinking light often means something needs attention, and certain combinations indicate paper jams, cover open or cartridge problems. The meanings differ by brand and model, so check the manual or the manufacturer website for the chart that matches your exact model.

On the computer, the print queue may say Offline, Paused, Error or Printing with no progress. Offline usually means the computer cannot reach the printer. Paused means someone, or something, paused the queue. Error often means the driver or port reported a failure. Treat the wording as a clue and search the exact message together with your printer model.

Differences Between USB, Wi-Fi and Ethernet Problems

How your printer connects changes what can go wrong.

USB

A USB printer relies on a cable and a port. A loose or damaged cable, a port that has stopped working, or a hub that cannot supply stable data can all interrupt printing. Try a different cable and a different port directly on the computer, not through a hub.

Wi-Fi

Wireless printers depend on the router, signal strength and the network name and password. A router that was replaced, a password that changed, or a printer that moved out of range can cause a sudden stop. Printers can also get a new network address after a router restart, which breaks the old connection on the computer.

Ethernet

A wired network printer avoids wireless interference but relies on the cable, switch and router. Check that the link light at the printer port is on and that the cable is fully seated.

Software Conflicts and Background Services

Sometimes the hardware is fine and the software layer is stuck. On Windows, the print spooler is a background service that manages queued jobs. If it stops or hangs, jobs pile up with no output, and restarting the service often clears it. On a Mac, resetting the printing system or removing and re-adding the printer can clear stale settings, but that removes all printers, so read the prompt carefully before you confirm.

Security software and recent operating system updates can also interfere. A firewall may block communication with a network printer, and an update may replace a working driver with a generic one. If printing stopped right after an update, check the printer manufacturer’s support page for a newer driver for your operating system version.

A Worked Example: Printer Shows Ready but Nothing Prints

Say the printer panel shows ready, the computer says printing, and the queue is stuck.

  • Print a test page from the printer’s own menu. It works, so the device is healthy.
  • Open the queue on the computer and cancel the stuck job. If it will not cancel, restart the print spooler service or restart the computer.
  • Send a one-line text document. If it prints, the earlier job or its file was the problem.
  • If it still fails, remove the printer from the computer and add it again using the current manufacturer driver.
  • If a network printer was added by an old address, re-add it using its name or the discovery option rather than the old number.

Working through this order keeps you from reinstalling software when the real fault was one corrupted job.

When to Contact Support or Replace the Printer

Contact the manufacturer when the printer prints a test page fine but nothing works from any device, when error codes persist after a restart, or when the printer makes grinding sounds. Have the model number, serial number and the exact message ready. Check whether the device is still under warranty, since a repair may be free.

For an older printer, compare a repair quote against the price of a new one and check whether the manufacturer still supports drivers for your operating system. If support has ended, replacement may be the more sensible path. Confirm current prices yourself, since they change often.

A Quick Checklist to Keep Handy

  • Power on, paper loaded, covers closed, no jam or error light.
  • Test page prints from the printer.
  • Queue clear and not paused or offline.
  • Connection verified by cable, Wi-Fi name or Ethernet link light.
  • Current driver installed for your operating system.
  • Ink or toner present and cartridges seated correctly.

Preventing Repeat Problems at Home or in a Small Office

Many printing failures return because the cause was never fixed. If several people share a printer, agree on one person to handle updates and cartridges so changes are not made by guesswork. Keep the manual or its web link, and the model and serial numbers, in a known place. Keep spare ink or toner that matches the exact model, and note when the last cartridge was replaced.

After any router change, operating system update or move of the printer, print a test page right away rather than waiting for an urgent document. Catching a problem when nothing is at stake gives you time to solve it calmly, and it shows you whether the cause was the change you just made.

Ready to Buy? Start Here

If this guide helped you decide what to look for, these links take you to the next step.

Compare specific products

Gear for this guide

As an Amazon Associate we earn from qualifying purchases. Prices and availability are shown on Amazon.

A Ten-Minute Triage Checklist

Before you work through detailed steps, a short triage helps narrow the problem. Answer each question and write down what you see. The pattern often points to the cause.

  1. Is the printer switched on, and are there any lights or messages?
  2. Can other devices in the house print, or is the problem limited to one?
  3. Did printing work yesterday, and what changed since: an update, a new router or a moved printer?
  4. Does the job leave the computer, or does it sit in the queue?
  5. Does the printer make noise or move paper when you send a job?
  6. Do you see a blank page, a partial page or nothing at all?
  7. Does a test page from the printer itself print correctly?

If the printer test page works, the machine is probably fine and the fault lies in the connection, the driver or the settings.

Wireless and Cable Connections Compared

Connection Common problem First thing to try
Wi-Fi Printer drops off the network Check the signal and the network name on the printer
USB cable Loose or damaged cable Try another cable and port
Ethernet Cable or router port fault Check the link lights and swap the cable

If one method keeps failing, try another for a while. A temporary USB link can confirm that the printer itself works.

When It Is Time to Call Support

If you have tried the main steps and the printer still does not respond, look up the model on the official support page. Many makers provide a diagnostic tool, a firmware update or a guide for specific error codes. Write down the code or the message, and note the steps you have already taken. Avoid downloading drivers from unfamiliar sites, since the maker support page is the safest source. If you smell burning, see smoke or find damaged cables, switch the machine off and unplug it, and do not use it again until it has been checked by a qualified technician. For printers under warranty, keep your proof of purchase ready before you call.

Narrowing It Down: One Printer, One Computer, One Document

When a printer will not print, the fastest progress comes from shrinking the problem. Most failed printing situations are really one of three smaller problems wearing a trench coat: the printer itself cannot print, the computer cannot reach the printer, or one particular document cannot be rendered. Each has a different fix, and testing in the wrong category wastes an evening.

Start with the printer alone. Use its own control panel to print an internal page, such as a status report, a network configuration page or a demo page, following the manual for your model. If the printer cannot produce even its own page, the problem lives in the printer: paper path, ink or toner, a hardware error state or a jam you have not found yet. No amount of computer troubleshooting will fix that, so stay at the machine until its own page comes out clean.

If the internal page prints, move to the computer and print the operating system’s test page. That single job exercises the driver, the connection and the queue without involving any application. A successful test page with a failing application tells you the fault is in the app or the document. A failing test page points at the driver, the queue or the connection between the two devices.

Finally, test a brand-new, simple document: a few lines of text in a plain editor. Complex PDFs, very large photos and documents with unusual fonts fail for reasons that have nothing to do with the printer. If the simple document prints and the complex one does not, you have found your category, and the fixes in the document section below apply.

The Print Spooler, Explained Like It Matters

On Windows, nearly every print job passes through the Print Spooler service, which accepts the job from your application, stores it temporarily and feeds it to the printer at the printer’s pace. On a Mac, the CUPS system plays the same role. When the spooler jams, the printer can be perfectly healthy and still nothing moves, which is why queue problems impersonate hardware problems so convincingly.

A spooler jam usually starts with one damaged job: a huge photo, a corrupted PDF or a job sent while the printer was off. That job sits at the front of the line in an error state, and every job behind it waits politely forever. The queue window shows the blockage if you look: one job stuck at the top with an error status, and your newer jobs queued behind it.

Clearing the blockage means removing the damaged job, not just pausing it. Cancel the stuck job first; if it refuses to cancel, stop the spooler service, clear the waiting job files as described in our dedicated queue guide, and restart the service. Then print the simple test document before resending the job that caused the trouble.

If the spooler jams repeatedly, treat the pattern as information. The same document jamming every time points at the document. Different documents jamming after a system update points at the driver. Jams that only happen on wireless point at the connection dropping mid-job, which is a network problem wearing a queue costume.

Ports and Addresses: The Invisible Half of the Connection

Computers do not print to a printer; they print to an address. On USB, that address is a virtual port created when the cable connects. On a network, it is the printer’s IP address or hostname. When the address and the printer stop matching, jobs vanish into a queue that reports errors or, worse, reports nothing at all.

The classic network version of this failure happens after a router restart or a power cut. The printer reconnects and receives a different IP address than before, while the computer keeps sending jobs to the old address. The printer looks online, the computer looks configured, and nothing prints. Printing the printer’s network configuration page and comparing its address with the port configured on the computer exposes the mismatch in a minute.

USB has its own version: a cable moved to a different port, a hub that sleeps, or a virtual port left over from a previous printer of the same model. If a USB printer stopped working after the desk was rearranged, suspect the port before the printer. Reconnecting directly to the computer, without a hub, and letting the system detect the printer again resolves a surprising share of these cases.

For network printers that keep changing address, the long-term fix is stability: reserve the printer’s address in the router’s settings, or assign a fixed address following the printer’s manual. One stable address ends the recurring “it worked last month” mystery for good.

Power Saving, Sleep and the Printer That Wakes Up Grumpy

Modern printers sleep aggressively to save energy, and most wake cleanly when a job arrives. Some, some of the time, do not. A printer that fails mainly on the first job of the day, then works perfectly afterward, is often a wake-from-sleep problem rather than a printing problem.

Test the theory directly: wake the printer from its panel, wait until it reports ready, and then send the job. If that sequence works reliably, adjust the printer’s sleep or auto-off settings in its menu to a longer delay, and check the maker’s support pages for a firmware update, since wake behavior is exactly the kind of thing firmware revisions quietly improve.

Computers sleep too, and a laptop that dozes mid-job can strand a half-sent document in the queue. If failures cluster around long documents printed while you step away, check the computer’s sleep settings alongside the printer’s. The pair has to stay awake together for the whole job.

Power strips add one more wrinkle. A printer on a switched strip that gets turned off nightly loses its network session and sometimes its place in the router’s address assignments. If the printer shares a strip with the desk lamp, consider giving it an always-on outlet; printers draw very little in sleep, and the stability is worth more than the savings.

A Second Worked Example: Only One Application Fails

Consider the common report that everything prints except one program, often a browser or a PDF reader. The test page works, other applications work, and the failing application either errors or silently does nothing. This pattern almost never means the printer is broken.

Work through the application’s own printing path. Check that the application has the right printer selected, because many programs remember the last printer used, which may be a PDF writer or an old device. Try the application’s alternative print route if it has one, such as printing through the system dialog instead of its built-in preview. Update the application, and if it is a browser, test the same page in a different browser to separate the page from the program.

PDFs deserve their own step. A PDF that fails while text documents print may be damaged, unusually large or built with features your driver struggles to render. Printing it as an image, an option most PDF readers offer in their advanced print settings, trades speed for reliability and is the classic workaround for a document that jams the queue repeatedly.

Prevention: A Fifteen-Minute Monthly Routine

Most “printer won’t print” emergencies are the visible end of months of small neglect. A short monthly routine prevents the majority of them. Print something small in color and black each month, which keeps inkjet nozzles from drying and confirms both paths work before you need them urgently.

Keep the printer’s firmware and the computer’s driver reasonably current, updating from the maker’s official support pages rather than third-party driver sites. Note the printer’s network address somewhere after any router change, and reprint a network configuration page to confirm it still matches what your computers expect.

Keep paper stored flat and dry, fan a fresh stack before loading it, and never mix paper types in one tray load. Keep the printer’s vents clear and its home dust-free; overheating and dust cause error states that look random until the pattern is noticed.

Finally, keep one known-good test ready: a simple one-page document you trust. When trouble strikes, that page, the printer’s own internal page and the operating system’s test page form a three-step ladder that tells you within minutes whether you are chasing the printer, the computer or a document.

More Questions From the Troubleshooting Trenches

My printer prints from my phone but not my computer. Where is the fault?

Almost certainly on the computer side: the driver, the queue or the address the computer is sending to. The printer and the network are proven working by the phone. Run the test page from the computer, clear any stuck jobs, and compare the printer’s current network address with the port configured in the printer’s settings on the computer.

Why does printing fail right after a Windows or macOS update?

System updates can replace, reset or tighten permissions around printer drivers and ports. The usual cure is to remove the printer from the system, restart, and add it again, followed by installing the maker’s current full driver package if the problem persists. Check the maker’s support pages for notes about the specific update if many owners report the same failure.

The printer says ready, the queue says printing, but nothing happens. What now?

That combination usually means the job is stuck in the spooler or being sent to an address the printer no longer occupies. Cancel the job, restart the spooler, confirm the printer’s network address from its own configuration page, and resend a simple test document before retrying the original job.

Is it worth repairing a printer that will not print at all?

If the printer cannot print its own internal page after paper, supplies and obvious jams are ruled out, the fault is internal. Compare the cost of a professional assessment with the machine’s age and replacement cost, and check the warranty first. For inexpensive home printers out of warranty, replacement is often the rational choice; for office machines, a service visit usually is.

Errors That Print Nothing: Reading What the Printer Is Telling You

A printer that refuses a job usually says why, but the message is split across three places: the printer’s own display or status lights, the operating system’s queue window and the application’s error dialog. Reading all three before changing anything turns guesswork into a short list of suspects.

The printer’s panel is the most truthful of the three. A paper, cover, ink or jam message there describes a physical state the machine can sense directly, and it outranks anything the computer claims. If the panel reports a problem, fix that first even if the computer insists the printer is ready; the computer’s status is often a stale snapshot from the last successful communication.

The queue window tells the transport story. A job stuck in an error state names the document that failed; a queue where every job waits behind one old job names a blockage; an empty queue with a failed application print means the job never left the application at all. Each pattern points at a different layer, and treating them as the same fault is how an hour disappears.

Status lights deserve a manual lookup rather than a guess. Blink patterns are a language, and the same pattern can mean different things on different models. The maker’s support pages decode them by model, and two minutes there beats twenty minutes of random cable swapping.

When the Problem Is the Room: Environment Checks People Skip

Printers live in real rooms, and rooms cause failures that no software setting can fix. A printer in a cold garage or a damp utility room behaves differently from one in a study: ink flows sluggishly in the cold, paper absorbs moisture and feeds badly, and condensation can fog sensors. If failures follow the seasons or the weather, suspect the environment before the electronics.

Dust is the slow version of the same story. Printers pull air and paper through themselves, and both carry dust that settles on rollers, sensors and, in laser printers, on the parts that decide whether a page is present at all. A printer that reports phantom jams or phantom empty trays in a workshop or a pet-heavy home often just needs a careful clean following the manual’s guidance, with the machine unplugged.

Power quality finishes the trio. A printer sharing a circuit with a heater, a kettle or a laser printer’s bigger sibling can see brief voltage dips exactly when it tries to print, producing failures that correlate with other appliances rather than with any document. If your printer fails when the heating cycles, test it on a different circuit before replacing anything.

None of these checks require tools, and all three are worth doing before the driver reinstall ritual, because reinstalling software cannot move a printer out of a damp corner.

The printer works for everyone else in the house but not for me. Why?

Because the fault lives in your computer’s configuration rather than in the printer. Other users printing successfully proves the printer, its supplies and the network path from their devices. On your machine, work through the driver, the queue and the configured address, and check that you are sending to the printer’s current network address rather than an old one left over from a previous setup.

Keeping a Troubleshooting Log That Actually Helps

If your printer fails more than once, start a small log: the date, what you tried to print, what each device reported and what fixed it. Memory is unreliable about patterns, and a log turns a frustrating mystery into a visible one. Failures that always follow a router restart point at addresses; failures on the first job of the day point at sleep behavior; failures with one document point at the document.

The log also pays off if you contact support. A clear sequence of symptoms and attempted fixes moves you past the scripted first steps and toward someone who can address the actual fault, and it protects you from repeating fixes that already failed. Five lines per incident is enough; the discipline matters more than the detail.

A word about third-party driver and “fix-it” tools

When a printer stops working, search results fill with utilities promising one-click repairs. Be cautious: printer drivers should come from the printer maker’s official support pages or through your operating system’s own update mechanism. Third-party driver tools can install mismatched or outdated packages and add problems of their own. The maker’s full software package for your exact model, installed after removing the old one, remains the reliable route when a reinstall is genuinely needed.

One last habit separates quick recoveries from long ones: change a single thing at a time, then retest with the same simple document. When three fixes are applied at once and printing resumes, nobody learns which one mattered, and the next failure starts from zero knowledge again. Methodical single changes feel slower for the first ten minutes and are faster across the life of the printer.

Frequently Asked Questions

Why does my printer say it is printing but nothing comes out?

The job is probably stuck in the queue, the printer is offline or the cartridge is not recognized. Clear the queue, restart both devices and check the ink screen.

Why did my printer stop printing after an update?

A system update can change drivers or network settings. Remove the printer and add it again, and install the latest driver from the maker.

Can a low-ink warning stop printing?

Yes. Some printers refuse to print when they think a cartridge is empty. Reseat or replace the cartridge.

Why will my printer print from my phone but not my computer?

The computer may have a stuck queue, the wrong printer selected or a driver problem. Start with the queue and the driver.

How do I test whether the printer or the computer is at fault?

Print a test page from the printer’s own menu. If that works, the printer is fine and the problem is the connection, queue or driver.

Why does my printer say ready but will not print?

The printer may be fine while the computer’s queue is stuck, paused or pointed at the wrong port. Print a test page from the printer, clear the queue, restart the print service and, if needed, remove and re-add the printer with the current driver.

How do I clear a stuck print job?

Open the print queue, cancel all documents and wait a moment. If a job refuses to cancel, restart the print spooler on Windows or restart the computer. On a Mac, remove the job from the printer window or reset the printing system as a last step.

Why does my wireless printer keep going offline?

Common causes are a weak signal, a router that restarted and gave the printer a new address, power-saving mode, or a changed Wi-Fi password. Move the printer closer to the router, reconnect it to the network and re-add it on the computer.

Do I need to update my printer driver?

Not always, but a newer driver can fix problems after an operating system update. Download it from the manufacturer’s support page for your exact model and system version, and remove the old driver first so settings do not conflict.

When is a printer not worth repairing?

When the repair cost nears half of a comparable new printer, when parts or drivers are no longer supported, or when problems keep returning. Get a written quote, check warranty status and compare it with current prices before deciding.

Bottom Line

Work from the simple to the complex: power, messages, paper, then a restart, the queue, the connection, ink and the driver. Most printers that will not print are back in a few minutes using the first four steps. If you are tired of the same trouble, consider switching to a model with a more reliable connection; see our best printers for home use.

More Printer Guides