Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
RTReviewstookA clearer perspective
Printers

How to Find Your Printer’s IP Address (Windows, Mac and Printer)

How to find a printer's IP address: from the printer screen, a network configuration page, Windows, Mac and your router.

We may earn a commission from qualifying purchases. How we pick products

Concept illustration of a printer, wireless router and laptop connected on a local network.

You need your printer’s IP address when you set up printing by network address, when a printer shows offline, when you want to open the printer’s settings page or when you want to reserve a fixed address for it. There are several easy ways to find it, and you can use whichever suits you. This guide covers the printer itself, your computer and your router.

Menu names vary by brand, so use the steps as a guide and check your printer’s manual if a name is different.

By the Reviewstook Editorial Team. Last updated: October 31, 2026.

Concept illustration of a printer, wireless router and laptop connected on a local network.
Conceptual editorial illustration; not a product photograph or software screenshot.

What an IP Address Is

An IP address is the number your router gives a device so other devices can find it on the network. It looks like 192.168.1.25. Most home routers assign addresses automatically and may change them over time unless you reserve one.

In this guide

Method 1: Print a Network Configuration Page

This is often the most reliable method. On most printers you can print a report from the menu: look for Setup, Network, or Reports and choose Network Configuration or Network Status. The page lists the IP address, the network name and the signal strength. On printers without a screen, a button combination prints it, which your manual describes.

Method 2: Check the Printer’s Screen or Menu

On printers with a screen, open Settings or Network and choose Wi-Fi Status, Wireless Details or TCP/IP. The IP address appears on the screen. Some printers show it only when connected to the network.

Method 3: Use Your Computer (Windows)

  1. Open Settings, then Bluetooth and devices, then Printers and scanners.
  2. Select your printer and open Printer properties.
  3. Go to the Ports tab and look for a port that shows an IP address, or open Web Services to see the device page.

Alternatively, open Control Panel, go to Devices and Printers, right-click your printer and open Properties, then check the Web Services tab or the Ports tab.

Method 4: Use Your Computer (Mac)

Open System Settings, then Printers and Scanners. Select the printer and click the information (i) button, or open Options and Supplies. Some printers show the address in the location or the Device URL. You can also open a browser and type localhost:631 to see the printers set up on your Mac if CUPS is enabled.

Method 5: Check Your Router

Log in to your router’s admin page (the address is often on a label on the router) and look for a list called Connected Devices, DHCP Clients or Attached Devices. Find your printer by name or by its manufacturer, and note the IP address. This method also lets you reserve the address so it never changes.

Method 6: Use the Printer Maker’s App

The maker’s mobile app usually lists your printer and displays its address in the printer information screen.

What to Do With the Address

  • Open the printer’s web page: type the address into a browser to reach its settings, status and ink levels. See how to check printer ink levels.
  • Fix an offline error: compare the address with your computer’s printer port; see how to fix a printer offline error.
  • Reserve the address: in your router, assign a fixed address to the printer so it does not change.
  • Add the printer manually: use the address when the computer cannot find it automatically.

Why You Might Need the Address

Most of the time a printer works without anyone knowing its address. The computer finds it automatically and everything prints. The address becomes useful when something goes wrong or when you want more control, and knowing the common reasons helps you decide which method to use.

You may need it to add a printer manually after the automatic search fails, to open the printer’s built-in web page, to set up scanning to a computer or folder, or to give an IT person the details they ask for. It also helps when a computer shows the printer as offline while the printer itself says it is connected, because the address stored on the computer may no longer match.

Before searching, it helps to know what type of connection you have. A printer on Wi-Fi or Ethernet has an address on your network. A printer connected by a USB cable to one computer does not have a network address in the same way, although it may still be shared from that computer. If the printer is only on USB, none of the methods below will give a network address.

  • Adding a printer by hand: you need the address.
  • Opening the printer web page: you need the address.
  • Normal printing: you usually do not.

Start with the printer’s own menu or a printed report, since that shows what the printer believes its address to be.

Choosing the Easiest Method for Your Situation

Six methods are listed above, and the best one depends on what you have in front of you. If you are standing at the printer and it has a screen, use the menu. It takes less than a minute and shows the current address directly.

If the printer has no screen, print the network report using a button combination. Many models have a dedicated wireless or information button, and the manual explains how to press or hold it to print a report. Check the manual or the maker’s support page for your model, since the steps differ.

If you are at a computer and the printer is already installed, use the printer properties. This is convenient because it shows the address the computer is currently using, which is useful for comparing against the printer’s real address. If you have router access, the device list works even when the printer is off screen or across the room.

  • At the printer with a screen: menu.
  • At the printer without a screen: printed report.
  • At the computer: printer properties.
  • Anywhere with router access: router device list.
  • Phone nearby: the maker’s app.

If two methods give different addresses, trust the printer’s own report, since that is the address it is using now.

Static and Reserved Addresses Explained

Home routers hand out addresses using a system called DHCP. By default, an address is lent to a device for a period of time, and the router may give a different one later. That is why a printer that worked yesterday can suddenly appear offline: the computer is still looking at the old address.

There are two ways to keep the address stable. The first is a reservation in the router, sometimes called a DHCP reservation or static lease. You pick the printer from the device list and tell the router to always give it the same address. This is usually the neater option, because the router stays in charge of the network.

The second is to set a fixed address on the printer itself, in its network settings. This works, but it carries a risk. If the address you choose is outside the router’s range, or is already used by another device, the printer will not connect properly. If you go this route, pick an address outside the range the router hands out, and check the router manual for what that range is.

  • Router reservation: easier to manage and safer for most homes.
  • Printer-side fixed address: needs care to avoid conflicts.
  • Write the chosen address down on a label near the printer.

If you are not comfortable with router settings, the maker’s support page for your router usually has a step-by-step guide.

When the Address Does Not Work

Sometimes you find an address, type it into a browser and nothing appears. That does not always mean you did the wrong thing. Work through the likely causes in order.

First, confirm that your computer or phone is on the same network as the printer. A guest network, a separate extender network or a mobile hotspot can isolate devices from one another. Second, check that you typed the address exactly, including the dots, and that you did not add extra characters. Try the address in a different browser if the first one shows an error.

Third, confirm that the printer is powered on and not in a deep sleep state. Some printers take a short time to wake and respond. Fourth, restart the printer and the router, then check whether the address has changed. A restart can hand out a new address.

Some routers have an option that stops devices from talking to each other, often called client isolation or AP isolation. If it is turned on, the printer address will not respond even though both devices are online. Check the router’s wireless settings for this option.

  • Same network for both devices.
  • Correct, current address.
  • Printer awake and online.
  • No device isolation in the router.

If the page opens but asks for a password, look in the printer manual for the default sign-in details and change them if the maker recommends it.

Where the Address Lives: A Method Comparison Table

You already have several ways to locate a printer’s network address in the guide above. This table compares them by the situation in which each one works best, so you can pick the quickest route instead of trying them all.

Situation Handy route What to keep in mind
The printer has a working screen Check the network or wireless menu Menu names differ between makers
The printer has no screen Print a network summary page using a button combination Check the manual for the exact button sequence
You are at a computer that already prints Open the printer properties or system settings The port or location field may show the address
You have access to the router Look at the list of connected devices Devices may be labeled by model name or by a generic code
You use the maker’s app Look for printer details or network information Some apps hide advanced details

Once you have the number, write it down somewhere sensible. A label on the router or a note in your phone saves you from repeating the hunt next time.

A Checklist for When You Are Stuck

Sometimes none of the usual methods work on the first try. Walk through this list before concluding that something is broken.

  1. Confirm that the printer is switched on and shows no error message.
  2. Check that the printer is joined to the same network as your computer or phone.
  3. Look at the wireless light or the network icon on the printer, if it has one.
  4. Power the printer off and on and wait for the connection to settle.
  5. Reboot the router if several devices are missing, following the router maker’s guidance.
  6. Try a different method from the list above, since a menu, a printed page and a router listing can each reveal the number.
  7. Read the manual for your model to confirm where network details are displayed.

If every attempt fails, the issue may be a connection problem rather than a lack of information, which is a different kind of troubleshooting.

A Short Glossary of Network Words

Printer instructions use several terms that are easy to mix up. Here is how they differ in plain language.

  • IP address: the number that identifies a device on your home or office network.
  • Router: the box that connects your devices to each other and to the internet.
  • Subnet: a group of addresses that share the same first numbers, typically all the devices in one home.
  • Gateway: the address of the device that links your network to the wider internet, usually the router.
  • DHCP: the feature in which the router hands out addresses automatically.
  • Hostname: a readable name that can sometimes be used in place of the number.
  • MAC address: a hardware identifier built into a device, separate from its IP address.

Using the Address Once You Have It

A printer address can serve several purposes. You may type it into a browser to open the printer’s own settings page, where you can check ink or toner status, update firmware or change network options. You may also enter it when adding a printer manually to a computer, which can fix a printer that was not detected automatically.

Opening the settings page

Type the number into the address bar of a browser on a device connected to the same network. If a certificate warning appears, read it carefully and follow the maker’s guidance on whether it is expected.

Adding the printer manually

In your computer’s printer settings, choose the option to add a printer by address, then enter the number and follow the prompts. Select the driver recommended by the maker if the system asks.

Keeping the address from changing

Some routers let you reserve an address for a specific device, which prevents the number from shifting. The router’s manual explains how, and the steps differ by model. If you are not comfortable changing router settings, ask the person who set up your network.

Practical Habits That Prevent Future Headaches

Printing problems often return after a router reboot or a change of internet provider. A few small habits reduce the pain. Keep a note with the printer model, network name and address. Print a network summary after any big change, such as a new router, and file it with your printer manual. Give the printer a clear name in your computer settings, so family members can tell which device is which. If the printer is in a hard-to-reach place, note where the reset or network button is located, since you may need it during setup.

When to Rely on the Manual or a Professional

Every printer maker publishes support pages and manuals that describe exactly how to display network details for each model. Use those instructions in preference to general advice when something differs. In a workplace, the network may be managed by an IT team, and changing printer settings without permission could disrupt other people. Ask your administrator before altering anything, and let them handle reserved addresses, security settings and shared printers. If the printer repeatedly drops off the network after you have followed the maker’s instructions, contact the maker’s support team or a qualified technician rather than making risky changes.

Home Versus Office Networks: What Changes

The same printer behaves differently on a small home network than it does in a workplace. At home, you usually control the router, so changing or reserving an address is a personal decision. In an office, addresses are often assigned by a central system, and printers may sit on a separate segment of the network from the computers that use them. That is why a method that worked at home, such as scanning the router list, may not be available at work.

If you are on a shared network, avoid guessing addresses or trying to connect to devices you do not recognize. Ask the person responsible for the network, who can give you the correct address or add the printer for you. Also remember that guest networks are often isolated from the main network, so a laptop on the guest side may not be able to see a printer on the main side at all.

Why the Address Matters More Than You Think

A printer’s IP address is the detail behind a remarkable share of home printing mysteries. Computers do not print to a printer; they print to an address where they believe the printer lives. When that belief and the printer’s actual address agree, printing feels like magic. When they drift apart, usually because the router handed the printer a new address after a restart, an outage or a settings change, printing fails in ways that blame everything except the real culprit.

That is why finding the address is a diagnostic skill and not just a setup step. The printer’s network configuration page tells you where the printer actually is. The printer’s properties on your computer tell you where the computer is sending. Comparing the two numbers resolves, in about a minute, the entire category of “it worked last week and nothing changed”, because something did change: the address.

Keep the address somewhere durable once you find it: in the printer’s record with its model and purchase date, in a note in the router’s administration pages if it supports comments, or on the configuration page you printed and filed. The next investigation starts from that note rather than from a search.

Reading the Address: What the Numbers Mean

Home network addresses usually look like four numbers separated by dots, and most homes use one of a few standard private ranges handed out by the router. You do not need networking expertise to use the address, but three ideas pay rent immediately.

First, the address is leased, not owned. The router’s DHCP service lends addresses to devices for a period, and a device that disconnects, sleeps through a router restart or stays off for days may receive a different one when it returns. Printers, which sleep a lot and are easy to forget, are champion address-changers in homes where nobody has told the router otherwise.

Second, the address has relatives worth recognizing. The router itself sits at a predictable address on the same range, the subnet mask defines the neighborhood’s size, and the printer’s configuration page lists all of them together. When you compare a printer’s page with a computer’s settings, you are checking that both devices live in the same neighborhood and agree on the printer’s house number.

Third, an address that begins with a self-assigned pattern, or a configuration page that reports no address or a disconnected state, is the printer telling you it never completed joining the network. That redirects the whole investigation to the connection itself, passwords, bands and signal, before any computer setting is touched.

Finding the Address From the Router’s Side

The router keeps the household’s address book, and its administration pages list every connected device with the address it currently holds. Log in to the router, find the connected devices or DHCP clients list, and look for the printer, which usually announces itself by its maker’s name or its model. This view has a unique virtue: it shows the address the network itself believes in, which settles arguments between the printer’s panel and a computer’s stale settings.

The router’s list is also where permanence is arranged. Most routers let you reserve an address for a device, identified by its hardware address, so the printer receives the same address every time it joins. Reserve the printer’s address there once, and the entire category of address-drift failures closes for the life of that router. Note the reservation in the printer’s records, because a future router will need the same kindness repeated.

If the printer does not appear in the router’s list at all, it is not on the network, whatever its panel implies, and the connection troubleshooting comes first. If it appears with a different address from the one on its own configuration page, trust the router and the printer over any computer, and suspect the computer’s stored entry.

Finding It From Windows and Mac Settings

Your computer’s printer entry remembers the address or port it was configured with, and reading that memory is the other half of the comparison. On Windows, the printer’s properties show its port, and for network printers the port name or its configuration reveals the address the computer is sending to. On a Mac, the printer’s entry and its options show the location or address the system recorded when the printer was added.

Read these values rather than assuming them. A printer added months ago by automatic discovery may be recorded under a hostname or a discovery identity rather than a raw address, which is fine and often more robust, while a printer added manually is frozen at the address typed that day. Knowing which kind of entry each computer holds explains why one machine in the house loses the printer after every router restart and the others never do.

When the computer’s address and the printer’s address disagree, the clean cure is to remove the printer entry and add it again, letting the system find the printer where it lives now, then confirm the new entry’s address matches the configuration page. Editing a stale port by hand also works, but re-adding is less error-prone for most owners and refreshes the driver association at the same time.

When the Printer Has No Panel Worth the Name

Some printers offer only a couple of buttons and a row of lights, with no screen to browse. Their makers still give them a voice: a button combination, often holding a wireless or information button, prints the network configuration page on paper. The manual and the maker’s support pages document the combination for your exact model, and that printed page is the most reliable address source such a printer has.

Routers and computers become the other witnesses for these models. The router’s device list will show the printer if it is connected, and the maker’s setup software, run on a computer on the same network, can usually find and report it. If neither witness can see the printer, the printer is not on the network, and joining it again, through the maker’s app or a temporary USB connection as the manual describes, is the path back.

For a printer connected by USB only, there is no IP address to find, and that absence is itself information: any instruction or error message demanding the printer’s network address belongs to a different configuration than the one you have, and following it will only confuse a working setup.

Making the Address Stay Found

Finding the address once is a task; making it stay found is a system. The reservation in the router is the foundation. On top of it, keep the printer’s configuration page from a healthy day filed with its records, so any future page can be compared line by line: address, network name, signal strength and connection state.

Revisit the arrangement whenever the network changes. A new router, a changed network name or a move to a mesh system all rewrite the address book, and the printer should be deliberately rejoined, reserved and re-added on each computer as part of that project rather than left to be discovered broken by each household member in turn.

Finally, label the printer itself if it serves a shared space: a small note with its network name and address saves every future troubleshooter the first ten minutes of the search, and in a small office it prevents the well-meaning experiment of a colleague re-adding the printer at a guessed address and creating a second, wronger problem.

More Questions About Printer Addresses

Why does my printer’s IP address keep changing?

Because the router lends addresses and reclaims them, and a printer that sleeps or disconnects between loans can receive a different one. The cure is a DHCP reservation in the router’s settings, which pins the printer to one address permanently. Until that is set, every router restart is a small lottery your computers may lose.

Two devices show the same address. Is that possible?

It should not happen on a healthy network, and when it does, usually because an address was typed manually on one device while the router lent the same address to another, the two devices take turns being reachable and printing fails intermittently in a maddening pattern. Let the router assign addresses, reserve the printer’s through the router rather than by typing it into the printer, and the conflict class disappears.

Can I just type the printer’s address into my browser?

Yes, on most network printers that opens its embedded web interface, which shows status, settings and often the full configuration in the clearest form available. It is one of the best verification habits you can build: if the browser reaches the printer at the address you found, the address is right and the network path is open, and any remaining printing problem lives in the computer’s configuration rather than in the address.

The address on the printer and the computer match, but it still will not print. Now what?

Then the address was never the fault, and you have eliminated a category, which is progress. Move to the next layers: the queue and its stuck jobs, the driver, and whether the printer is set as offline or paused on that computer. Matching addresses with a silent printer is the classic signature of a queue or driver problem wearing a network costume.

Finding the Address of a Printer That Is Offline

The frustrating version of this task is a printer that will not come online at all, so its panel and pages seem out of reach. Work from the witnesses that remain. The router’s device list may still show the printer’s last address or its hardware address even when the printer itself is asleep or sulking. Your computer’s printer entry preserves the address it last used successfully, which is a lead even if it is no longer the truth.

Wake the printer physically and give it a full minute to rejoin the network before judging anything; printers returning from deep sleep negotiate slowly, and an impatient check records an absence that was really a delay. Then print the network configuration page, which a printer can almost always produce from its own panel even when every computer in the house has lost it, because that page is generated locally and needs no network at all.

If the page reports a disconnected state or a self-assigned address, the printer itself is telling you it is not on the network, and the search for its address properly becomes the work of rejoining it: correct network, correct password, adequate signal. An address found after that rejoining, and then reserved, closes the case in the right order.

IPv6, Hostnames and Other Names You May Meet

Some networks and printers also use longer IPv6 addresses or friendly hostnames, and seeing them is not a complication to fear. A hostname-based connection can actually be more robust than a raw address, because the name follows the printer when its number changes. If your computer’s printer entry uses a name rather than a number and printing is reliable, leave it alone; robustness already achieved needs no improvement.

Where an address is required, by a scanning setup, a firewall rule or a support instruction, use the numeric address from the printer’s configuration page, and expect to confirm it after any router change. Write down both the name and the number in the printer’s record; future you, troubleshooting at midnight, will accept either key that opens the door.

Is it safe to share my printer’s IP address with support?

A home printer’s address is a private, local address: it identifies the printer inside your own network and is meaningless on the public internet, rather like a room number inside your house. Sharing it with the maker’s support while troubleshooting is routine and safe. What you should not share are your router’s administrator password, your Wi-Fi password or any account credentials, which support does not need to help you find an address.

Make finding the address a reflex rather than a research project: configuration page from the printer, port from the computer, compare. That two-minute habit resolves the most common network printing complaint in homes, the printer that vanished without anything visibly changing, and it costs nothing but the willingness to read two numbers before reinstalling anything.

A Worked Example: The Printer That Moved House on the Network

Consider the common story in full. A printer works for months. A storm cuts the power one evening; by morning the computers report the printer offline, though its panel cheerfully shows a Wi-Fi connection. The configuration page, printed from the panel, shows an address ending in a different number from the one in the owner’s note. The router’s list agrees with the printer. Each computer’s printer entry still holds the old address, because that is where the printer lived when it was added.

The fix takes minutes once the numbers are compared: reserve the printer’s current address in the router so the story cannot repeat, then remove and re-add the printer on each computer so their entries point at the truth. Nothing was broken at any point in this story. The router did its job after the outage, the printer did its job rejoining, and the computers faithfully sent jobs to an address their printer no longer occupied. Nearly every “offline” mystery in a home is this story with different weather.

Does every device in the house need the printer’s address?

No. Devices that found the printer through automatic discovery usually track it by name or discovery identity and never ask you for a number. You need the address for specific jobs: reserving it in the router, opening its web interface, configuring scan destinations manually, or diagnosing a computer whose entry has gone stale. Knowing how to find it in a minute, when one of those jobs arises, is the skill; memorizing it is not.

Keep the healthy configuration page. It is the printer’s address book entry, its network diary and its alibi in every future dispute about what changed, all on one sheet of paper, and it costs exactly one page to maintain.

When the next outage, router swap or house move shuffles the network, that sheet plus a reservation in the new router will have printing restored before the rest of the household has finished unpacking, which is the quiet superpower this whole guide exists to hand over.

What if the printer’s address looks completely different from my computer’s?

Different in the last number is normal: every device gets its own. Different in the earlier numbers usually means the two devices are on different networks or subnets, for example the printer joined a guest network or a range extender’s separate segment while the computer sits on the main network. Devices on different segments often cannot reach each other at all. Bring the printer onto the same network as the computers, confirm the addresses share their neighborhood, and reserve the address once they agree.

Same neighborhood, reserved number, configuration page on file: with those three in place, the address stops being a recurring mystery and becomes what it should have been all along, a boring fact you can look up.

Boring, in networking, is the highest compliment a setup can earn.

Aim for boring.

Illustrated checks: From the printer’s screen; Print a network configuration page; On Windows.
Selected checks from this guide; follow the complete instructions in the article.

Frequently Asked Questions

Why does my printer’s IP address keep changing?

Routers assign addresses automatically and can change them. Reserve an address for the printer in the router.

Can I find the address without the printer’s screen?

Yes. Use the router’s device list, your computer’s printer properties or the maker’s app.

Is the IP address private?

Yes, it works only on your local network.

What if the address starts with 169.254?

The printer did not get a proper address from the router. Restart the router and reconnect the printer.

Do I need the IP address to print wirelessly?

Usually not. Most computers and phones find the printer automatically. The address is mainly for manual setup, the printer web page and troubleshooting.

Can two devices have the same IP address?

They should not. If two devices share an address, one or both may lose connection. This can happen when a fixed address is set without checking what the router already uses.

Is the printer address the same as the MAC address?

No. The IP address is assigned on the network and can change. The MAC address is a hardware identifier printed in the network report that routers use to recognise the device.

Why does my printer show an address ending in 0.0?

That usually means it has not connected to the network or has not been assigned an address. Check the Wi-Fi connection and restart the router and printer.

Can I find the address with my phone?

Often yes. The maker's app may show it, and some phone Wi-Fi settings show device details. A network scanning app is another option, but check what it does before installing.

Does a new router change my printer address?

It can. A new router may use a different address range, so the printer may get a new address and need to be reconnected or re-added on your computers.

Is it safe to open the printer web page?

Yes, on your own network. Do not expose it to the internet, and change any default password if the maker advises it.

Bottom Line

The quickest ways to find the address are to print a network page from the printer, read it from its menu or check your router’s device list. Reserve the address so it stays fixed. See what to do when a printer will not connect to Wi-Fi and how to connect a printer to Wi-Fi.

More Printer Guides