Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
RTReviewstookA clearer perspective
Printers

5 Best Printers for Cricut Print Then Cut Projects (2026)

Five printers for Cricut print then cut projects compared by ink cost and paper handling. See which suits stickers, labels and crafts.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

See 3 more Amazon options
Read the full guide ↓

Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.

Cricut’s Print Then Cut feature prints your design on a standard home printer, then the Cricut machine cuts around it. Cricut says it works with most standard home printers, so the printer choice is mostly about ink cost and paper handling.

This guide covers five printers for Cricut projects. It is built from published specifications and listings, not our own testing. Check Cricut’s help pages for the current printer and paper guidance.

New to printers? Start with our guide to the best printers for home use and how we pick printers.

By the Reviewstook Editorial Team. Last updated: October 31, 2026.

Comparison of three options: Epson EcoTank ET-2850; Canon MegaTank G3290; Canon PIXMA TS9521Ca.
Three options from this guide. See the full comparison and qualifications in the article.
In this guide

Quick Picks

Printer Type Best for
Epson EcoTank ET-2850 Ink tank all-in-one High-volume home printing at low running cost
Canon MegaTank G3290 MegaTank all-in-one Everyday printing with refillable tanks
Canon PIXMA TS9521Ca Color inkjet all-in-one Photos and documents with auto duplex
HP Envy 6555e Color inkjet all-in-one Everyday home color printing
Epson Expression Photo XP-980 Wide-format photo all-in-one Home photo prints with scanning and copying

5 Best Printers for Cricut Print Then Cut Projects

Top pickBest for families and students who print every week

1. Epson EcoTank ET-2850

A refillable ink tank all-in-one that prints, scans and copies over wireless.

Good for: Families and students who print every week. Strengths: Ink tanks usually bring a lower cost per page than cartridges. Weaknesses: Higher up-front price than a basic cartridge model, and inkjet nozzles can clog if left idle. Skip it if you print only a few pages a month.

Check on Amazon

2. Canon MegaTank G3290 — 5 best printers for cricut print then cut projects (2026)

Best for families and students who print a lot

2. Canon MegaTank G3290

A wireless MegaTank all-in-one from Canon, a newer model in the line that includes the G3270.

Good for: Families and students who print a lot. Strengths: Refillable tanks tend to lower the cost per page. Weaknesses: Bigger than a cartridge printer; check the feeder and duplex support on the product page. Skip it if you print very little.

Canon Megatank G3290 All-in-One Wireless Printer
Canon Megatank G3290 All-in-One Wireless Printer

Check on Amazon

3. Canon PIXMA TS9521Ca — 5 best printers for cricut print then cut projects (2026)

Best for households that print photos and documents

3. Canon PIXMA TS9521Ca

A wireless home all-in-one inkjet that prints, copies and scans, with auto duplex printing and a 4.3-inch touchscreen, per the listing.

Good for: Households that print photos and documents. Strengths: Automatic two-sided printing, a touchscreen and a five-ink system, per the listing. Weaknesses: The listing mentions no document feeder, and cartridge costs add up with volume. Skip it if you need a feeder for scanning stacks or the lowest ink cost.

Canon PIXMA TS9521Ca – Wireless Home All-in-One Inkjet Printer
Canon PIXMA TS9521Ca – Wireless Home All-in-One Inkjet Printer

Check on Amazon

4. HP Envy 6555e — 5 best printers for cricut print then cut projects (2026)

Best for homework, recipes and occasional photos

4. HP Envy 6555e

A home-focused color inkjet all-in-one with duplex printing.

Good for: Homework, recipes and occasional photos. Strengths: A straightforward feature set and automatic two-sided printing. Weaknesses: Cartridges and HP’s ink program may add running cost. Skip it if you print in volume.

HP Envy 6555e Color Inkjet Printer
HP Envy 6555e Color Inkjet Printer

Check on Amazon

5. Epson Expression Photo XP-980 — 5 best printers for cricut print then cut projects (2026)

5. Epson Expression Photo XP-980

A wireless wide-format all-in-one from Epson’s Expression Photo line.

Good for: Hobbyists who want borderless photos and everyday documents from one machine. Strengths: Wide-format printing plus scanner and copier in one body. Weaknesses: Bigger and heavier than a standard all-in-one, and cartridge ink is not cheap per page. Skip it if you only print documents.

Epson Expression Photo XP-980 Wireless All-in-One Wide-Format Printer
Epson Expression Photo XP-980 Wireless All-in-One Wide-Format Printer

Check on Amazon

Cricut Print Then Cut: Notes

Registration marks

Print Then Cut adds a black registration border that the machine reads. A clean, sharp print helps it cut accurately.

Paper and sticker choices

Printable sticker paper and cardstock are common. See printable vinyl sticker paper.

Ink cost

Color-heavy sticker sheets use a lot of ink. A tank printer lowers cost per sheet.

Best Picks by Category

These labels summarize the picks by category and are not hands-on test results.

  • Top rated: Epson EcoTank ET-2850 — mid-range tier, check price on Amazon.
  • Most reviewed: Epson EcoTank ET-2850 — mid-range tier, check price on Amazon.
  • Lowest price: HP Envy 6555e — budget tier, check price on Amazon.
  • Premium option: Epson Expression Photo XP-980 — premium tier, check price on Amazon.

Price, Rating and Review Comparison

The table lists the picks by price tier. Prices change often, so confirm the current price on Amazon.

Product Price Rating Ratings Price tier
HP Envy 6555e Check price on Amazon — — Budget
Epson EcoTank ET-2850 Check price on Amazon — — Mid-range
Canon PIXMA TS9521Ca Check price on Amazon — — Mid-range
Canon MegaTank G3290 Check price on Amazon — — Mid-range
Epson Expression Photo XP-980 Check price on Amazon — — Mid-range

How Much Feedback Backs Each Rating

A high average from a handful of ratings is weaker evidence than a slightly lower average from thousands. Here is how the sample size looks for each pick.

  • Epson EcoTank ET-2850: a large feedback sample.
  • Canon MegaTank G3290: a moderate feedback sample.
  • Canon PIXMA TS9521Ca: a moderate feedback sample.
  • HP Envy 6555e: a large feedback sample.
  • Epson Expression Photo XP-980: a small feedback sample, so treat its feedback cautiously.

How to Choose

Plan for sticker and cardstock paper

Print then cut often uses sticker paper or cardstock. Check your printer’s paper weight limit.

Think about ink cost

Color-heavy designs use a lot of ink. A tank printer lowers the cost per sheet.

Check print quality for registration marks

Print Then Cut needs clean black registration marks. Any decent printer can do this.

How We Chose These Products

We start from products sold on Amazon with a full product name and clear specifications, and we skip results that show only a brand name or a vague title. We then read the listing and any manufacturer information for each one and note the features that matter for printers: print technology, running costs, connectivity and size. We do not run our own lab tests, and this guide contains no hands-on measurements. Use it to build a shortlist, then check current prices, dimensions and return terms on the Amazon page before you buy.

Buying Guide: What to Check Before You Choose

Ink tank versus cartridge

Ink tank printers use refillable tanks and usually have a lower cost per page, with a higher purchase price. Cartridge printers are cheaper up front but ink can cost more over time. Check the page yield and the cost of refills.

Laser printers

Laser printers print text quickly and sharply and do not clog like inkjets. Color lasers cost more. Check the toner cost and the print speed.

Photo printing

Photo printers focus on color accuracy and paper handling. Check the number of inks, the paper sizes and the cost per print.

Quick Reference: Which Pick Suits Whom

  • Epson EcoTank ET-2850: suits families and students who print every week
  • Canon MegaTank G3290: suits families and students who print a lot
  • Canon PIXMA TS9521Ca: suits households that print photos and documents
  • HP Envy 6555e: suits homework, recipes and occasional photos
  • Epson Expression Photo XP-980: suits hobbyists who want borderless photos and everyday documents from one machine

Common Mistakes to Avoid

  • Judging a printer by its price without considering ink cost.
  • Ignoring the starter cartridge size.
  • Forgetting the paper types needed.
  • Assuming all-in-ones are always better.
  • Skipping the return window.

Setup and Care

  • Install the maker’s app or driver.
  • Connect to Wi-Fi.
  • Run an alignment and nozzle check.
  • Print regularly to avoid clogs.

How Print Then Cut Works, Step by Step

Print Then Cut is a two-machine job. You design in Cricut Design Space, send the artwork to your printer, and the printer lays down the colors along with a black rectangle around the edge of the sheet. You then put the printed sheet on a cutting mat, load it into the Cricut, and the machine’s sensor scans the black border to find where the artwork sits. Only then does it cut. The cut line follows the shapes in your design, and it can be a full cut through paper or a kiss cut through the sticker layer that leaves the backing intact.

The scanning step is why the printer matters at all. The Cricut needs to read the border reliably, and any shift in how the sheet was printed shows up as a cut that sits a hair off the edge of the artwork. Most of the errors people blame on the cutter actually begin earlier: a page that slid in the tray, a printer scaling the image slightly, a border smudged by a dirty roller, or a sheet that curled under heat. Knowing this helps you choose a printer for its paper handling and consistency rather than for features unrelated to the job.

Size Limits and Why They Shape Your Choice

Design Space limits the printable area for Print Then Cut because the sensor needs room for the border. For standard letter-size sheets, the usable image area is a bit smaller than the sheet itself, and Cricut publishes the exact maximum for each machine on its help pages. Check those numbers for your cutter before buying paper or printer, since they decide whether you can fit many small stickers on one sheet or only a few large ones.

A printer that supports letter-size sheets covers most hobbyists. Wide-format printers, such as the Epson Expression Photo XP-980 in this guide, can handle larger paper, but the cutter’s own limit still applies. A bigger printer only helps if you plan to use the extra space for other projects, such as posters or photos, rather than for stickers alone.

Paper Feed Path and Thick Media

Sticker sheets, cardstock and vinyl are thicker and stiffer than office paper, and they stress a printer’s feed path. A printer that curves paper sharply around a roller may jam or leave creases in a stiff sheet. Machines with a straighter path, often a rear feed tray, handle heavier media better. Look in the specifications for the maximum paper weight, often listed in gsm or pounds, and compare it with the media you plan to use.

  • Printable sticker paper is typically heavier than plain copy paper but within the range of most inkjets.
  • Cardstock for gift tags and cards may be near the upper limit of some home printers.
  • Printable vinyl and magnet sheets can be thicker and may need a gentler feed path.
  • Glossy or heavily coated sheets may be slower to dry and smear if handled early.

Feed one sheet at a time with thick media, and let each sheet dry before stacking. If the printer drags a corner or leaves marks, try a different tray or reduce the load.

Ink Chemistry and Finish

Inkjet printers use dye-based inks, pigment-based inks, or a mix of the two. Dye inks tend to produce vivid color on glossy media but may smear when exposed to water. Pigment inks often resist water and fading better on matte surfaces. The listings for the printers in this guide do not always say which ink type they use, so check the maker’s page when water resistance matters to you, such as for labels on bottles or stickers meant for a water bottle.

A laminate or sealant gives you a second option. Self-adhesive laminating sheets or clear sealing sprays protect printed stickers from moisture, scratches and sun, and they let you use a wider range of printers. Test a small sample first, since some sprays can cause dye inks to run, and give the print time to dry before sealing.

Finish affects the cut as well. Very glossy or reflective surfaces can confuse the sensor in bright rooms, and some users cover the surrounding area to cut down on glare. If the machine fails to detect the border, try a matte paper, a dimmer room or a recalibration, and keep the mat and sensor clean.

Getting Reliable Registration

A few habits make the difference between clean cuts and wasted sheets.

  • Print in the highest quality setting your paper allows, because sharper borders are easier for the sensor to read.
  • Turn off any scaling options such as fit to page or shrink to fit in the print dialog, which can change the size of the border.
  • Use the Add Bleed option in Design Space so the cut falls slightly into the colored area and white edges do not show if alignment is a touch off.
  • Run the cutter calibration for Print Then Cut occasionally, especially if cuts begin to drift.
  • Place the sheet in the top left corner of the mat and press it flat so it does not lift.
  • Avoid dark backgrounds that extend to the border, since the sensor needs contrast to see the line.

Printer nozzle checks matter here too. A clogged nozzle can leave streaks inside the border or thin the black lines, and registration is harder to read. Run a nozzle check if a sheet looks banded, and clean the heads according to the maker’s instructions, keeping in mind that cleaning uses ink.

Running Costs for Sticker Makers and Small Sellers

If you sell stickers or make them in bulk, running costs and speed matter as much as quality. A sheet of full-color stickers can use a lot of ink, and the price per page of cartridges adds up fast. Tank printers reduce the cost per sheet in exchange for a higher purchase price, as the buying guide above explains, but they also take time to set up and need regular use to avoid clogged nozzles. A cartridge printer may suit a hobbyist who prints a handful of sheets a month.

Think about print speed, too. Photo-quality modes can be slow, and a batch of twenty sheets may take a while. Duplex printing is irrelevant for stickers, but it helps if you also print documents and instructions. If you plan to sell, consider the cost of media, laminate, mats and replacement blades together with ink, since the printer is only part of the cost per sticker.

Questions to Ask Before You Order

  • What is the maximum paper weight, and does it include the sticker sheets I plan to use?
  • Is there a rear feed or a straight paper path?
  • Does the maker describe the ink as dye, pigment or both?
  • Can I turn off scaling and print at actual size?
  • How much do replacement cartridges or ink bottles cost, and how many pages does each yield?
  • Does the printer have wireless setup that works with my computer or phone?

Troubleshooting a Failed Cut

When a cut lands in the wrong place, work through the likely causes in order instead of changing everything at once. First, confirm the printed border is dark, even and not smudged. Second, check that the sheet was printed at actual size with no scaling, and that the page was fed straight. Third, make sure the mat is clean and sticky enough to hold the sheet flat, as a curled corner shifts the sensor reading. Fourth, move the mat and machine away from direct sunlight or a bright lamp that could wash out the border. Finally, run the calibration routine and try again with a fresh sheet of the same paper.

If the problem repeats only with one type of media, the paper is the culprit. Some sheets are coated in ways that reflect light or take ink slowly. Keep a small log of paper, printer settings and results so you can repeat what worked. Over time, you will build a short list of settings for each material, and wasted sheets will become rare.

How Print Then Cut Actually Works

Print Then Cut is a conversation between two machines. The printer produces the design on printable material — sticker paper, cardstock, printable vinyl — inside a border of registration marks. The cutting machine reads those marks with its sensor, learns exactly where the printed design sits on the sheet, and cuts around it with an accuracy your eyes would struggle to match. Everything in this guide follows from that conversation: the printer’s half is to deliver a crisp, correctly sized design on a sheet the cutter can read, on material the printer can feed without damage, at a cost per sheet that lets you make mistakes and learn.

The five printers here — the Epson EcoTank ET-2850, Canon MegaTank G3290, Canon PIXMA TS9521Ca, HP Envy 6555e and Epson Expression Photo XP-980 — were chosen for that half of the conversation: reliable feeding of craft media, colour good enough for stickers and cards that people keep, and running costs matched to how much a maker actually prints. They differ in ink economics, in the size of media they handle, and in photographic ambition, and those differences map directly onto different kinds of making.

Registration Marks, Margins and Why Size Accuracy Matters

The cutter can only cut what it can see, so the printed sheet must respect the system’s geometry: the design inside the marks, the marks fully printed and unobstructed, and the printer’s scaling set to actual size rather than any helpful fit-to-page adjustment. That last setting is the silent saboteur of Print Then Cut — a design printed at ninety-seven percent still looks right to the eye and confuses the cutter’s expectations enough to spoil the sheet. Make actual-size printing a saved habit in your workflow, and verify with a ruler on the first sheet of a new material before committing a batch.

Lighting and material finish join geometry in the sensor’s world. Very glossy materials can reflect the sensor’s light unhelpfully, and dark or transparent materials challenge it in their own ways; the community knowledge for your cutter model will name the tricks — matte tape over marks, better light, a different material finish — and the printer’s contribution is a mark printed densely and cleanly, which is one more reason a printer with healthy nozzles and honest paper settings matters to a cutting workflow. A faint, streaky registration mark is a failed sheet waiting at the cutting stage for a fault that happened at the printing stage.

Materials: Sticker Papers, Cardstock and Printable Vinyl

Printable sticker paper is the Print Then Cut staple, and it comes in matte and glossy, full-sheet and pre-cut, waterproof-claiming and ordinary. Matte finishes cut cleanly, read well in photographs of your finished products, and hide small print imperfections; glossy finishes give colours their punch and suit designs that need it. Whichever you choose, feed it as the printer prefers — usually a sheet or a few at a time through the straightest path — and let prints dry fully before the sheet meets the cutting mat, because a tacky print on a strong-grip mat is a small heartbreak with a soundtrack.

Cardstock serves the tags, boxes, cards and cake toppers of the craft world, and it asks the printer for honest paper handling at weights beyond office paper. Check your model’s comfortable weight range and feed heavier stock by the recommended route. Printable vinyl, for the makers who use it, rewards the same care plus drying patience. In all three materials the rule is one: the printer, the material and the setting must agree, and a test sheet — printed, dried, cut — is the treaty that proves they do before a project depends on it.

Ink Economics for Makers

Craft printing drinks colour ink the way photographic printing does, in full-coverage sheets rather than text pages, so the running-cost question is not a detail for regular makers — it is the margin on every sticker sheet and card. That is the EcoTank ET-2850’s and MegaTank G3290’s argument in this list: bottled ink turns a maker’s heaviest cost into one of their lightest, and it changes behaviour for the better, because a maker who is not rationing ink prints the test sheet, the experiment and the second colourway without negotiation. The HP Envy 6555e serves the lighter maker with cartridge convenience and all-in-one versatility, its costs entirely reasonable at occasional volumes.

The PIXMA TS9521Ca and the Expression Photo XP-980 make a different argument: quality and scale. The PIXMA’s larger format opens designs that standard paper cannot hold, and the XP-980’s photo heritage shows in gradients and colour depth for makers whose stickers and prints are judged as images first. A maker selling their work should cost a sheet honestly on each candidate — ink, material, the occasional spoiled sheet — and let that arithmetic, plus the size of their designs, arbitrate between the economy camp and the quality camp. Both camps are right, for different stalls at the same craft fair.

A Print Then Cut Workflow That Wastes Nothing

The makers who produce clean results cheaply share a workflow, and it is worth copying whole. Design with the cutter’s area in mind from the first sketch, so nothing important lives outside the marks. Print one test sheet on the real material when anything changes — new paper, new ink, new design scale — and cut it before printing the batch. Let sheets dry fully, in a clean stack, before cutting. Keep a project note per design: printer settings, material, scaling confirmation, and any sensor tricks the material needed. And keep the spoiled sheets; they are the tuition record of the craft, and reviewing them before a similar project is how the same lesson avoids being paid for twice.

Set the printer up as a craft tool, not an afterthought: a clear name, the media types you use saved as presets where the driver allows, and the good materials stored flat and labelled beside it. The cutting machine gets the glory in Print Then Cut, understandably — it is the one that moves — but the experienced maker’s secret is that the cut is decided at the printer, in marks printed true, on material fed kindly, at a size that is honestly one hundred percent. Choose the printer in this list whose economics and format match your making, build the workflow above around it, and the two machines will converse fluently for years.

Troubleshooting Print Then Cut Failures at the Printer

When a Print Then Cut job fails, the fault wears a stage name, and finding the stage is the whole diagnosis. If the cutter cannot find the marks, the printing stage is the first suspect: marks faint from a struggling nozzle, scaled by a helpful fit setting, trimmed by a borderless mode, or printed on a material whose finish blinds the sensor. Print a fresh sheet on plain paper with marks only and watch the cutter read it — that single test separates printer faults from material faults more reliably than any amount of forum reading. If the marks read on paper but not on the real material, the material’s finish or the room’s light is the variable, and the known tricks for your cutter model apply.

If the cut is offset from the print, suspect scaling and calibration in that order: actual-size printing confirmed, then the cutter’s own calibration routine run as its maker prescribes. If sheets jam or skew in the printer, the material is too heavy, too curled or fed by the wrong path for its weight — craft media punish the casual loading that office paper forgives. And if colours disappoint, return to the paper-type setting and the drying time, the two variables that explain most craft-printing sadness. Worked in stage order, nearly every Print Then Cut failure resolves at a desk rather than in a support queue, and the project note gains one more line each time.

Selling Print Then Cut Work: Costing a Sheet Honestly

Makers who sell stickers, cards and paper goods should know their cost per finished sheet as precisely as any manufacturer knows a unit cost: the printable material, the ink in full-coverage designs, the cutting mat’s slow consumption, the spoiled sheet in every batch, and the minutes of the maker’s own time at an honest rate. The printer decision moves the ink line more than any other — which is why the EcoTank ET-2850 and MegaTank G3290 are the sellers’ centre of this list — and it moves the spoiled-sheet line too, since reliable feeding and true registration marks are waste prevention disguised as specifications.

Price from that sheet cost, not from what similar listings seem to charge, because the makers who endure are the ones whose arithmetic survives a busy season. Keep the costing in the project note beside the settings, and revisit it when materials change supplier: a cheaper sticker paper that spoils one sheet in five is not cheaper, and only the note knows it. The craft fair rewards the beautiful; the year rewards the beautiful whose maker also counted. A printer chosen on honest costing is how a hobby becomes a stall, and a stall becomes a business, without the maker ever having to learn arithmetic from a loss.

Growing a Craft Setup: When the Second Machine Arrives

Serious makers eventually split the work the way this guide’s camps suggest: a tank printer for the volume of everyday cutting work, and the quality or format specialist for the flagship products — or the household’s ordinary printer promoted to craft duty while a dedicated machine takes over the documents. The split works because Print Then Cut’s demands are specific: feeding craft media kindly matters more than document speed, and ink economics matter more than either. Recognise the growth moment by the queue — designs waiting on a shared printer, household documents interrupting a production run — and let the second machine arrive as a relief rather than a rescue.

Whichever stage your making has reached, the foundations do not change: marks printed true, materials matched to settings, sheets dried before they are cut, and a note kept for every design that matters. Build those under any of the five printers here and the work will look after itself — which leaves the maker free for the part no machine can do, the designing itself.

Designing for the Cut: What Print Then Cut Teaches Designers

Print Then Cut quietly teaches design discipline, because the cutter’s requirements become the designer’s instincts. Designs need a clean, closed outline the blade can follow, enough border between the printed edge and the cut edge that tiny variations stay invisible, and details sized for the material — a whisker-thin line that prints beautifully may tear at the cut or weed away to nothing. Makers learn to add the bleed, simplify the fragile flourish, and test the smallest element of a design before committing a sheet of thirty copies of it. These are not limitations so much as the grammar of a medium, and fluency in it is visible in finished work that looks effortless because its effort was spent at the design stage.

The printer’s role in that grammar is fidelity: the outline it prints is the outline the cutter believes in, so edge sharpness and honest sizing are design features, not printer trivia. A maker choosing from this list for design-led work — intricate stickers, detailed toppers, layered cards — should weight clean feeding and crisp output heavily, and should prove a new printer with their most demanding design, not their simplest, during the return window. The machine that handles the hard design gracefully will never be troubled by the easy ones, and the maker will have bought with the only evidence that matters: their own work, through their own workflow, on their own materials.

The Maker’s Shelf: Organising Materials and Machines

A craft setup works in proportion to its organisation, and the printer’s corner deserves the same order as the cutting station. Materials flat and labelled by type and finish, because matte and glossy sticker papers are twins until the moment they matter. The printer’s own supplies — ink for the cartridge models, bottles for the tank models — stocked before they are needed, since a production evening lost to an empty colour is the crafter’s version of the dispatch-day failure. The test sheets and project notes filed by design, where the next session can find them in the dark.

None of this is elaborate, and all of it together is what separates a craft corner that produces from one that merely accumulates. The five printers in this guide were chosen to thrive inside such order — fed the right materials, kept in regular use, their economics understood — and to repay it with the only thing a maker truly buys a printer for: sheet after sheet of designs that cut where they were drawn to cut, in colours that match the screen’s promise closely enough to sell, gift and keep with pride.

The Beginner’s First Month With Print Then Cut

New makers should spend their first month climbing in the order the craft forgives. Week one belongs to plain paper and simple shapes: prove the conversation between printer and cutter — marks read, sizes true, cuts where the lines promise — before any real material is spent. Week two introduces sticker paper and the drying discipline, with designs simple enough that a spoiled sheet teaches cheaply. Week three brings the first real project end to end, note kept, warts recorded. Week four is for repetition: the same project again, faster and cleaner, proving that the workflow and not luck produced the first success.

That patient month buys what no upgrade can: a maker who knows which stage owns each fault, whose materials are organised, whose printer settings are presets rather than mysteries. Every experienced crafter’s tidy output rests on such a month, usually invisible in the finished work — which is rather the point. Choose the printer in this guide whose format and ink economics fit the making you intend, give it that month of honest apprenticeship beside your cutter, and the two machines will repay the patience for years, one clean sheet at a time.

A Closing Word on Matching Printer to Making

The five printers here are aimed rather than ranked: the Envy at the occasional maker who values an all-in-one’s versatility, the EcoTank and MegaTank at the regular and the seller whose ink bill is a business line, the PIXMA at the maker whose designs outgrow standard paper, the Expression Photo at the maker whose work is judged as imagery first. Making, honestly assessed — how many sheets, how large, how often, and whether they are gifts, keepsakes or goods — is the specification that decides among them. Answer it, build the workflow this guide describes around the answer, and Print Then Cut becomes what its best practitioners know it to be: not two machines negotiating, but one craft, practised fluently, at a desk that produces exactly what its owner imagined.

Care of Finished Pieces: Stickers, Cards and Keepsakes

A finished Print Then Cut piece deserves the same small aftercare as any printed work. Stickers meant for laptops, bottles and journals live longest when their material was chosen for the surface and their print was fully dry before application; a maker who tests one piece in the real location for a week before selling a design learns what no specification sheet can teach. Cards and toppers keep best stored flat, dry and out of direct light, exactly like the materials they were printed from. And the maker’s own archive copy of each design — one perfect sheet, filed with its project note — is both the quality reference for future batches and, years later, a small museum of how the craft developed. Print it on the good material, on the day the batch succeeds, while the settings are still warm in the machine’s memory.

Keep that archive as faithfully as the project notes themselves, and the craft gains a memory: every future design can be compared against proven work, every repeated design can be reproduced without archaeology, and every new maker who inherits the desk — a child, a partner, a future self with a bigger stall — inherits the knowledge as well as the machines. That inheritance, sheet by sheet, is how a hobby becomes a tradition.

And that, finally, is the standard every printer in this guide should be judged by: not the first sheet it produces, but the hundredth, arriving identical to the promise of the first, because the maker and the machine have learned each other completely.

Choose well, set it up carefully, keep the notes honestly — and then simply make things, which was the point of every page of this guide from the beginning.

Frequently Asked Questions

Do I need a special printer for Cricut?

Cricut says standard home printers work for Print Then Cut. Check their help pages.

Can I use a laser printer?

Check Cricut’s guidance for your machine and materials.

What paper works best?

Printable sticker paper and cardstock are popular. Check the maker’s guidance for each material.

Which is cheaper to run, inkjet or laser?

Laser is usually cheaper per page for text, and ink tank printers are cheaper for color and photos.

How do I connect my printer to Wi-Fi?

Use the printer’s setup menu or the maker’s app. See our Wi-Fi guide.

Do I need genuine ink?

Not always, but some printers restrict third-party ink. Check the terms.

Why does my Cricut cut off-center after printing?

Common causes include page scaling in the print dialog, a sheet that shifted in the tray, a dirty or smudged registration border, glare on the sheet or a cutter that needs calibration. Print at actual size, keep the mat flat, clean the sensor and run the Print Then Cut calibration in Design Space.

What does Add Bleed mean in Cricut Design Space?

Add Bleed extends your artwork slightly past the cut line so a small alignment error does not leave a white edge on the finished piece. Design Space offers it as a Print Then Cut setting. If you prefer exact edges you can turn it off, but bleed is the safer choice for most sticker projects.

Can I use glossy sticker paper for Print Then Cut?

Yes, but glossy surfaces can reflect light and make it harder for the cutter to read the registration border. Try a dimmer room, cover reflective surroundings or switch to a matte paper if scanning fails. Let glossy prints dry fully before loading the mat, since wet ink can smear.

How do I make printed stickers waterproof?

Use a waterproof or pigment-based media if the maker offers it, or protect the print with clear laminating sheets or sealer spray after it dries. Test on a spare sticker first, because some sprays can make dye inks run. Water resistance also depends on the adhesive and the surface it sticks to.

Does print resolution matter for Print Then Cut?

Higher quality settings give crisper edges and darker registration marks, which help the sensor. Most home inkjets are sharp enough for the border. Use high-resolution artwork, since low-resolution images can look soft at sticker sizes, and pick the best quality mode your paper supports.

Bottom Line

If you print many sticker sheets, an ink tank printer like the Epson EcoTank ET-2850 or Canon MegaTank G3290 keeps ink cost down. For a mix of crafts and photos, the Canon PIXMA TS9521Ca is the flexible choice.

More Printer Guides