Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.
Replacing factory car speakers is one of the easiest ways to improve in-car sound, but only if you choose speakers that fit your vehicle and suit your stereo. This guide covers size, type, power and installation so that you buy the right speakers the first time.
This guide is based on product listings and general car-audio knowledge, not our own testing. Always confirm the fit for your exact make, model and year.
By the Reviewstook Editorial Team. Last updated: October 31, 2026.

Find the Right Size First
Car speakers come in standard sizes such as 4×6, 5.25, 6.5 and 6×9 inches, but the correct size depends on your vehicle and which position you are replacing (front doors, rear doors or rear deck). Look up your vehicle’s fitment in a car-audio fitment guide or check the owner’s manual, and measure mounting depth. See our lists for 4×6, 5.25″, 6.5″ and 6×9″.
In this guide
Coaxial or Component Speakers
Coaxial speakers put the tweeter in front of the woofer in one unit and are simple to install. Component systems separate the tweeter and woofer with a crossover, which allows better placement and clearer sound but takes more work. See component car speakers.
Power Handling and Sensitivity
Match the speaker’s RMS power rating to your stereo or amplifier. Sensitivity tells you how loud a speaker plays with a given power, which matters if you use the factory stereo. High sensitivity helps with low-power head units.
Materials and Sound
Cone and surround materials affect durability and sound. Polypropylene cones resist moisture; silk and soft-dome tweeters tend to sound smoother. Brand sound signatures differ, so read reviews of the sound you prefer.
Do You Need an Amplifier or Subwoofer?
Factory stereos have little power. A small amplifier can improve clarity and volume, and a subwoofer adds bass. See 4-channel car amplifiers and subwoofer amplifiers.
Installation Tips
Check the wiring harness adapters, mounting brackets and grilles needed. Sound-deadening material can improve results. If you are not comfortable with car wiring, ask a professional.
Marine and Outdoor Speakers
For boats and humid places, choose speakers rated for marine use. See marine speakers.
Reading RMS and Peak Power Ratings
Speaker packaging often shows two power numbers, and they mean different things. RMS describes the power a speaker can handle continuously, while peak describes a short burst. For matching a speaker to a stereo or amplifier, the RMS figure is the one to use. Peak figures are mostly marketing and do not tell you how the speaker behaves during a long drive with the volume up.
The goal is to give the speaker an amount of power that sits comfortably within its rating. A factory head unit typically delivers modest power per channel, so speakers with a low RMS requirement and good sensitivity make sense. An aftermarket amplifier can deliver much more, so you can choose speakers with a higher RMS rating and give them room to work. Underpowering is not usually harmful by itself, but pushing a weak source to maximum volume can cause clipping, a distorted signal that stresses speakers more than clean power does.
Also check the impedance, normally listed in ohms. Most car speakers are designed for a common impedance, but amplifiers have limits on the loads they can drive, so confirm both in the manuals. If you plan to wire more than one speaker per channel, the combined load changes, so plan it before you buy.
When in doubt, read the product listing and manual carefully, and ask a car-audio shop to confirm the match. A little checking at this step prevents burned voice coils and disappointing sound later.
Sensitivity and Working With a Factory Stereo
If you keep your original stereo, sensitivity becomes one of the most important numbers. Sensitivity tells you how loud a speaker plays for a given input power. A higher figure means more volume from the same power, which is exactly what a low-powered factory head unit needs. A speaker with low sensitivity can sound quiet and lifeless with a factory source, even if it is a fine speaker on a powerful amplifier.
It helps to understand how the factory system is built. Many vehicles use thin, light speakers designed for cost and for use with a small built-in amplifier. Some premium factory systems have separate amplifiers and special wiring, and they can complicate a speaker swap. Before buying, find out whether your vehicle has a factory amplifier, a branded sound system or a digital processor, and ask a specialist what adapters or interfaces exist for it.
There are also sound characteristics worth knowing. Factory systems often apply equalization intended for the original speakers, and new speakers may sound different until you adjust the tone controls. Start with flat settings, listen to familiar tracks and make small changes. Avoid pushing the bass boost to the maximum, which tends to distort on a small amplifier. If you later add an amplifier, you can choose the same speakers or upgrade them. Choosing a speaker with a reasonable RMS rating from the start gives you room to grow.
Sound Tuning, Crossovers and Speaker Placement
Where a speaker sits affects the sound as much as the speaker does. Tweeters produce high frequencies that travel in a narrow beam, so their direction matters. In a component system you can often mount the tweeter on the door, the dash or the pillar, and angle it toward the listener. Higher placement generally gives a clearer sense of the stage in front of you, but it takes testing, and many installers use temporary mounting before cutting or drilling.
The crossover splits the signal so each driver handles the frequencies it is best at. In coaxial speakers, a simple crossover is built in. Component sets come with a separate crossover box, which may offer settings such as tweeter level. Start in the neutral position and adjust gradually, because too much tweeter level sounds harsh and fatiguing.
Think about balance as well. If the front speakers are much louder than the rear ones, the stage can feel lopsided, and many listeners prefer the rear speakers lower or off. Use the balance and fader controls to set the stage for the driver, not the passenger. Finally, remember that road noise masks details, so a quiet cabin helps. Listening at the volume you actually use while driving tells you more than listening in a driveway, and tuning in several sessions on different roads gives you a fair view of the result.
Sound Deadening and Door Preparation
A door is a thin metal box with holes in it, which is a poor place for a speaker without help. Adding damping material to the door skin reduces rattles and resonances so bass sounds tighter. You do not need to cover everything. Focus first on the outer door skin directly behind the speaker and on obvious loose panels, then consider the inner skin and sealing large service holes.
Use material made for automotive use and follow its instructions about surface preparation. Clean the metal, press the material firmly into place and trim it carefully so it does not block window mechanisms, drain holes or wiring. Drain holes are important: blocking them can trap water inside the door and cause rust, so check before you close it up.
Mounting rings and baffles can also help. A solid mounting surface lets the speaker move air properly and keeps the cone from flexing. Rings made for specific vehicles or generic spacers can help a speaker sit flush and clear window tracks. Check the mounting depth before you buy: a speaker that is too deep may hit the window glass when it is lowered. Test the window travel and check for any rub before reinstalling door panels. For people who want a quieter cabin overall, additional material on floors and the trunk lid reduces road noise, but it adds weight and effort, so match it to your goals and patience.
Warranty, Returns and Signs of Failing Speakers
Before you buy, read the seller’s return terms. Installed or damaged speakers are often not returnable, so test fit loosely before cutting wires or modifying panels. Look for warranties and what they cover, and keep your receipt and packaging until you are satisfied. Confirm that the product is intended for your region and vehicle, and that all parts listed in the box are included.
Know the signs of a failing speaker. Crackling or buzzing at moderate volume, a rattling sound on bass notes, or one side sounding quieter than the other all suggest a problem. Foam surrounds on older speakers can crumble with age, heat and humidity, and the cone may rub or sag. A speaker that works at low volume but distorts quickly may have a damaged voice coil or a loose connection.
Before blaming the speaker, check the simple things. Make sure the wiring is secure, the polarity is correct on both terminals, and the balance and fader settings are neutral. Test with another source, because a poor-quality music file or a weak Bluetooth connection can sound like a speaker fault. If problems persist, swap left and right speakers to see whether the fault follows the speaker. When it is time to replace, use the lessons from the first purchase: confirm the size, power and mounting depth, and treat the replacement as a chance to fix whatever bothered you before.
A Pre-Purchase Checklist for Car Speaker Upgrades
Car audio shopping goes smoothly when you gather facts about your vehicle first. Spend a short session with the checklist below, and you will be able to narrow the field in minutes rather than hours.
- Identify the speaker sizes in each position: front doors, rear doors, dashboard and rear deck. They are often different.
- Use a fitment guide from a reputable source or the speaker maker to confirm which models suit your vehicle.
- Check whether your car uses a factory amplifier or a premium sound system, because that changes the matching.
- Decide whether you want a simple drop-in replacement or are willing to modify brackets and wiring.
- Think about the music you play most, and whether you value clarity, warmth or bass.
- Consider whether you may add an amplifier later, which would influence the power handling you choose.
- Look at the box contents: grilles, mounting hardware and wiring harness adapters are not always included.
Take a few photos of your door panels and speaker locations before ordering. They help you remember where things go, and they are useful if you ask a shop for advice.
Mistakes That Spoil a Speaker Upgrade
Many disappointments come from a few repeated habits. Avoiding them improves the result of almost any upgrade.
Choosing power numbers first
Shoppers often look only at peak power because the number is large. Continuous power handling and sensitivity usually tell you more about how a speaker will behave with your stereo. Match the speaker to the output of your head unit or amplifier.
Ignoring depth and clearance
A speaker may match the opening diameter but still hit the window mechanism because the magnet is too deep. Check the mounting depth against your door, and ask the maker if you are unsure.
Skipping adapters
Factory plugs rarely match aftermarket speaker terminals. A wiring harness adapter keeps the original wiring intact and makes the change reversible.
Rushing the door work
Door panels have hidden clips and screws. Pulling hard can break plastic parts. Look up the removal steps for your model, or use a trim tool set.
Expecting speakers alone to fix everything
If a factory stereo is weak or the doors rattle, new speakers can help but may not solve the whole problem. Think of the system as a chain in which every link counts.
Comparing Upgrade Paths in a Table
There is more than one route to better sound. The table below compares general options, from a simple swap to a more complete overhaul.
| Upgrade path | Effort | What it improves | Keep in mind |
|---|---|---|---|
| Replace front speakers only | Low | Clarity and detail, where most listening happens | Rears may sound mismatched |
| Replace front and rear speakers | Moderate | Balanced sound across the cabin | More wiring and panel work |
| Add a small amplifier | Moderate to high | Headroom, cleaner volume | Needs correct wiring and fusing, often a professional job |
| Add a subwoofer | Moderate to high | Low bass that small speakers cannot reproduce | Takes trunk space and needs power |
| Add sound deadening | Moderate | Less door rattle and road noise | Adds time to the project |
Many listeners find that front speakers plus a bit of door treatment deliver the biggest improvement for the effort. You can always expand later.
When to Follow the Manual and When to Hire an Installer
Most speaker swaps are manageable at home, provided you disconnect the vehicle battery as your owner’s manual advises, handle trim carefully and follow the speaker maker’s wiring diagram. Take your time and keep screws organized in a labeled tray.
Hire a professional installer when the job involves amplifiers, new power cables, fuse placement, factory systems with digital signal processing, or vehicles with delicate electronics and airbags near the work area. Electrical work in a car must follow the vehicle maker’s instructions, and mistakes can damage components. A reputable shop can also tune the system, set crossovers and recommend parts that suit your vehicle.
Check your warranty before you begin the work. Some dealers have policies about aftermarket changes, and asking first avoids surprises. Keep the original speakers in a box in case you sell the car or need to return it to stock.
Small Setup Details That Make a Big Difference
After installation, give the system time and attention. Begin with all equalizer settings flat, then adjust gradually. Many people boost bass and treble too much on the first day and later find the sound tiring. Play familiar recordings you know well, at moderate volume, and listen for balance between voices and instruments.
Check the fader and balance settings. A sound that feels off-center is often a balance setting rather than a speaker problem. Make sure the polarity of each speaker is correct, because reversed wiring can thin out the bass.
Finally, keep notes about what you did, which parts you used and the settings you prefer. If you change the system later or visit a shop, those notes save time and help you stay consistent.
A Short Glossary for Reading Speaker Listings
- Coaxial: a speaker with the tweeter mounted in front of the woofer, in one unit.
- Component: a system with a separate woofer, tweeter and crossover.
- Crossover: a filter that sends high sounds to the tweeter and lower sounds to the woofer.
- Impedance: the electrical load of the speaker, usually given in ohms.
- Sensitivity: how loud a speaker plays for a given amount of power.
- Frequency response: the range of sound a speaker claims to reproduce.
Knowing these terms makes product pages less intimidating and helps you compare options fairly.


Ready to Buy? Start Here
If this guide helped you decide what to look for, these products are a place to start.
As an Amazon Associate we earn from qualifying purchases. Prices and availability are shown on Amazon.
Diagnose the Factory System Before Spending Anything
The most expensive mistake in car audio is replacing the wrong part. Before shopping for speakers, spend one drive honestly assessing what you have. Play familiar music at your normal volume and listen for specific faults. Distortion only at high volume usually means the factory amplifier section is running out of clean power, and speakers alone will not cure it. A generally thin, lifeless sound at all volumes points more at the speakers themselves. A system that sounds decent at a standstill but disappears under road noise has a power and sensitivity problem, not a tone problem, and that distinction changes what you should buy.
Check each corner of the car individually using the balance and fader controls. A single blown or water-damaged door speaker is common in older cars, and replacing one failed unit is a different job, and a different budget, from upgrading a healthy system. Listen for rattles and buzzes on bass notes too: a loose door card or a perished speaker surround can imitate an electronic fault. Finding a rattle now matters because a new, more capable speaker will find it again and play it louder.
Finally, note what your factory head unit can and cannot do. If it has reasonable tone controls and enough clean output for your listening level, new speakers have a fair chance to shine. If it distorts early, mangles the sound with fixed loudness curves, or lacks the inputs you need, the honest upgrade order may be source first, speakers second. This guide concentrates on speakers, but a buyer who knows their head unit’s limits will choose speakers that suit the power actually available.
Measure Twice: Fitment Beyond the Advertised Size
A speaker’s headline size is only the start of fitment. Depth is the measurement that actually stops installations: the new speaker’s magnet and basket must clear the window mechanism, the door’s inner skin and any wiring looms behind the mounting surface. Measure the available depth in your door with the window fully down, because a speaker that clears a raised window can foul the glass the first time you lower it. Diameter of the mounting hole, the spacing of the screw holes, and the height the tweeter or grille protrudes all matter as well, since a door card must sit back down flush over the new unit.
Factory speakers often sit in shaped plastic adapters or carry the connector and mounting tabs in one moulded piece. Budget for adapter rings and harness plugs as part of the job rather than discovering their absence with the door apart. Those small parts also protect the car’s wiring, because they let you connect without cutting factory looms, which keeps the installation reversible and the car easier to sell later.
Rear decks, dashboards and pillars each have their own traps. Deck speakers may share space with boot hinges and torsion bars. Dashboard locations can be shallow and sun-baked, which argues for durable materials. Pillar tweeters involve trim held by clips that break if levered carelessly. None of this is difficult, but all of it rewards the buyer who looks at the actual location, with the trim loosened if necessary, before ordering anything.
A Sensible Upgrade Order for Real Budgets
If the budget will not stretch to everything at once, sequence matters more than brand. Start at the front, because the front speakers create the soundstage you actually listen to; rear speakers mainly fill in for passengers and add a sense of space. A good front pair on factory power is a complete, satisfying first stage for many cars. Add sound treatment to the front doors at the same time if you can, because the doors are open anyway and the improvement per hour of labour is the best in car audio.
The second stage is power. An amplifier, even a modest one, gives the front speakers the clean headroom that stops distortion and lets them play with authority at motorway volume. The third stage is bass: a subwoofer relieves the door speakers of the lowest notes they were never shaped to reproduce, and the whole system sounds cleaner as a result. Rear speakers come last, upgraded when the fronts are sorted, or left factory in many builds without apology.
Resist the opposite order. A powerful subwoofer behind factory door speakers produces a car that thumps and mumbles. Expensive rear speakers impress rear passengers, who are rarely the person paying. The staged order in this section follows how you actually hear the system from the driver’s seat, and it lets each purchase be judged on its own merits before the next is made.
After the Install: Running In, Setting Up and Listening Properly
New speakers change their sound slightly over their first hours of use as the suspension loosens, so postpone final judgement until they have played for a while at moderate levels. Use that period to set the system up rather than to crank it. Start with tone controls flat and any loudness or enhancement features off, then adjust in small steps with familiar music. Most factory head units offer enough control to balance a new pair once you stop asking the tone controls to fix problems that belong to installation or power.
Check the unglamorous things in the first week. A door card not fully clipped home buzzes on certain notes. A speaker lead resting against a moving window regulator will eventually chafe. A polarity error, where one speaker is wired backwards, leaves the bass thin and the image vague, and it is worth testing for deliberately with a familiar track: voices should sit firmly in the centre of the windscreen, not smeared across it. Every one of these faults is free to fix in week one and maddening to live with for a year.
Then simply drive with it. Judge the upgrade on your ordinary commute, at your ordinary volume, with your ordinary music. A system that makes that journey better has succeeded, whatever it does on a demonstration track in a quiet car park.
Materials and Construction: What the Cone Is Made Of, and Whether to Care
Speaker listings love material names, and a buying guide should translate them into expectations. Paper and treated-paper cones remain common in sensible car speakers because they are light, well behaved and forgiving of modest power, which suits factory head units. Polypropylene cones shrug off the moisture and temperature swings inside a car door, which is why they dominate at everyday prices; their sound is clean and neutral when the design around them is competent. Woven and composite cones aim for stiffness at low weight, which can sharpen detail, but they ask more of the amplifier and the installation to show their best.
Tweeter materials shape the top end’s character in broad strokes. Silk and textile domes tend toward smoothness, which flatters factory systems and long drives. Harder dome materials can sound more incisive and detailed, and can also sound relentless in a reflective car cabin full of glass if the rest of the system is bright. There is no hierarchy here, only matching: a lively tweeter in a lively cabin on a bright head unit is three helpings of the same flavour, and experienced installers balance the recipe rather than chasing any single ingredient.
Surrounds and baskets matter for survival more than for sound. Rubber surrounds outlast foam in hot doors. Baskets that resist flexing keep the moving parts aligned at high excursion. In a car, where a door is a hostile box of water, heat and vibration, construction quality is not a luxury feature; it is the difference between a speaker that sounds good in year three and one that buzzes in month nine. When two speakers read similarly on paper, the one built for the environment usually wins the long game.
Sound Deadening and the Door as an Enclosure
A car door is a speaker enclosure designed by people who were thinking about windows, locks and crash protection, in that order. It is full of holes, its outer skin flexes, and its inner panel rings. That is why sound treatment transforms modest speakers: sealing the service holes gives the woofer a more predictable volume of air to work against, damping material on the outer skin stops it drumming along, and a proper mounting baffle stops the speaker wasting energy shaking its own frame. Owners routinely report that treated doors make an ordinary speaker sound like a class above, and for once the routine report is accurate.
You do not have to treat the whole door to gain most of the benefit. Cover the area immediately around and behind the speaker, seal the largest access holes with suitable material while keeping drainage and mechanisms clear, and make sure nothing you add can foul the window’s travel. Work cleanly, because material applied over dirt and moisture lets go in the first hot summer. And keep the door’s drain holes open: a door is designed to get wet inside and dry out, and treatment that traps water creates problems worse than rattles.
Set expectations correctly, though. Treatment fixes the enclosure, not the speaker, the power or the source. A treated door with a poor speaker still sounds poor, just more solidly poor. The staged approach earlier in this guide, good front speakers first with treatment while the doors are open, exists precisely because the two improvements multiply each other.
Questions to Ask a Seller or Installer Before Money Changes Hands
Whether you buy from a specialist, a general retailer or an installer who supplies and fits, a short set of questions separates a system chosen for your car from a system chosen for the shelf. Ask what the speaker needs to fit your exact model: adapters, harness plugs, spacers, and whether the quoted parts include them. Ask what power the recommendation assumes, and whether that is your factory head unit’s real output or an amplifier you have not budgeted for. A recommendation that quietly requires three other purchases is not a recommendation; it is a down payment.
Ask about the installation itself if someone else is fitting. Will the factory wiring be cut or will harness adapters be used? Will the door’s moisture barrier be resealed, since a torn barrier left open is how doors leak and speakers die young? Will sound treatment be included around the speaker, and if not, what would it add while the door is already apart? Installers who do good work welcome these questions, because the answers are their selling points. Vague answers are information too.
Ask what happens afterwards. If a speaker rattles, buzzes or fails in the first months, who removes and refits it, and at whose cost? Door trim that has been off once comes off more easily the second time, but someone still has to do it. Clarify the returns position before the boxes are opened, especially for speakers bought unseen for an unusual car, because fitment surprises are common and a painless exchange is worth more than a small saving.
Finally, ask the question that reveals the most: what would you fit in your own car at this budget? The answer, and the reasoning behind it, tells you whether you are being sold a system or advised on one. Car audio rewards advice more than almost any other purchase in this guide’s territory, because the car, the installation and the listener vary so much that the right answer is always partly local. Buy from people who ask about your car before naming a speaker.
If you are fitting the speakers yourself, ask these same questions of the guides and videos for your specific model before starting, and treat the first door as the lesson and the second as the job. Every installer alive learned that way; the only difference is that they had someone watching the first time.
Second-Hand Speakers and Old Stock: Bargains With Conditions
Car speakers are a healthy second-hand market because owners upgrade in stages and yesterday’s front pair becomes surplus. Used speakers can be excellent value, but inspect the parts that age: the surround for cracks or softness, the cone for tears or water staining, and the terminals for corrosion. Press the cone gently and evenly and listen for scraping, which suggests a voice coil that has been overheated or knocked out of alignment. A speaker that passes those checks and plays cleanly at moderate volume during a demonstration is usually a safe buy.
Old stock sold as new carries a different caution. A discontinued model can be a bargain, but check that mounting adapters and any model-specific parts are still obtainable, and that the pair is genuinely a pair, matched in version. Manufacturers revise models quietly, and two speakers with the same name bought from different sources occasionally differ in detail. None of this argues against saving money; it argues for inspecting with your hands and ears rather than trusting a listing’s photograph.
Whether new or used, keep the packaging until the installation is finished and tested. Door speakers are awkward shapes that resent being transported loose, returns are simpler in original boxes, and the box is where the grilles, screws and templates you did not need this time will live until the day you move the system to another car.
A Short Word on Testing Before You Commit
Where a retailer allows it, hearing car speakers before buying teaches more than any review, provided the test is honest. A demonstration board flatters every speaker with a solid mounting and a quiet room, so listen for character rather than for bass the car will never reproduce: vocal clarity, treble smoothness, and composure as the volume rises. Take your own music, including a poor recording you know well, because a speaker that survives your worst track will thrive on your best. Then discount the demonstration’s polish by the knowledge that your doors are worse enclosures, and buy the speaker whose character you liked, fitted with the care this guide describes. Character survives the journey into a car; demonstration bass does not.
Frequently Asked Questions
How do I know what size speakers fit my car?
Check a vehicle fitment guide or your owner’s manual and measure the mounting depth.
Do new speakers need an amplifier?
Not always, but an amplifier makes them play louder and clearer.
Are component speakers better?
They usually sound better but cost more and take more work to install.
Can I install car speakers myself?
Many people do, with the right adapters and a basic toolkit.
What does RMS mean on a car speaker?
RMS is the continuous power a speaker can handle, and it is the figure to match to your stereo or amplifier. Peak power describes short bursts and is less useful for matching.
Why do my new speakers sound quiet on the factory stereo?
Factory stereos have limited power, and speakers with low sensitivity may play quietly. Look for higher sensitivity ratings, check your tone settings and consider adding a small amplifier.
Will new speakers fit in my door?
They fit if the diameter, mounting hole pattern and depth match. Check the mounting depth against your window travel and use mounting rings or adapters if the hole pattern differs.
Should I turn the rear speakers off?
Not necessarily. Many listeners prefer rear speakers set lower than the front ones to keep the sound stage ahead of them, and some systems work well with rear fill. Adjust the fader and listen.
Is sound deadening worth it?
For door speakers it can reduce rattles and tighten bass, and the main areas are the outer door skin behind the speaker and loose panels. You do not need to cover every surface to hear a difference.
How long do car speakers last?
It varies with materials, power, heat and humidity. Foam surrounds tend to age faster than rubber ones. Replace speakers when you hear distortion, rattles or loss of output that wiring checks do not explain.
Should I replace the front or rear speakers first?
The front, in almost every case. You sit facing the front speakers, they carry the stereo image and the detail, and they are where your money is audible from the driver’s seat. Rear speakers contribute fullness and serve rear passengers, and factory rears are often adequate for that supporting role for a long time. Upgrade the rears when the front stage is finished, or when a rear unit has actually failed.
Do I need to disconnect the battery before fitting speakers?
It is a sensible precaution for any work on car electrics, and door work puts your hands near airbag wiring and window motors in many models. At minimum, have the ignition fully off and the key away from the car. Follow your car’s manual for the correct order of disconnection and for anything that needs resetting afterwards, such as window auto functions or radio settings. Taking ten minutes over this is part of doing the job properly.
How long does a first speaker installation usually take?
For a straightforward front-door pair in a common car, allow a relaxed half day the first time, including learning how the door cards come off. The second side always goes faster than the first. Cars with complex trim, separate crossovers or heavy sound treatment take longer. Rushing trim removal is how clips break and rattles are born, so the honest answer is to start in the morning and let the job take the time it takes.
Will new speakers make a quiet factory system louder?
They can, if you choose speakers with higher sensitivity, which is the figure that describes how much sound a speaker makes from a given amount of power. A more sensitive speaker plays louder on the same factory output, which is valuable when road noise is the enemy. What speakers cannot do is create clean power the head unit does not have, so if the factory system distorts rather than merely whispering, power is the real cure and sensitivity only helps at the margins.
Bottom Line
Start with the right size for your vehicle, match power to your stereo and decide between coaxial and component speakers. Add an amplifier if you want more volume. Browse our best 6×9 car speakers or other sizes above.
Related Reading
- Soundbar Buying Guide: Channels, Atmos, HDMI ARC and Subwoofers
- 6 Best Soundbars for TV
- 6 Best 2.1 Computer Speakers with Subwoofer: PC and Gaming
More Speaker Guides
- Best 6.5-Inch Car Speakers
- Best 6×9 Car Speakers
- Best Marine Speakers
- Speaker Wire Gauge Guide
- All speaker guides




