A reflector holder lets one person place a reflector or diffuser where it is needed, without an assistant. Some are small spring clamps that sit on a light stand stud. Others are telescopic arms with a swivel joint that reach out over a subject.
The six holders below include three clamps and three boom-style arms, with lengths, mounts and materials taken from each listing page. We have not used these holders ourselves, and load and grip claims are the makers’ own. No reflector comes with any of them.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Clamp or boom | A clamp is compact; a boom reaches farther and angles more freely |
| Mount size | Check for a 5/8 inch stud or a 16 mm socket to match your stand |
| Adjustment | Look for 360 degree rotation and a vertical tilt range |
| Load | Larger reflectors are heavier, so check any stated limit |
Specs at a Glance
| Holder | Type | Mount | Notes |
|---|---|---|---|
| K and F CONCEPT | Spring clamp | 5/8 inch stud; 1/4-3/8 inch adapter | Metal; 360 degree turn, 180 degree tilt; umbrella hole |
| YUOCU | Telescopic boom | 16 mm socket | Aluminum; 27.9 to 47.2 in; listed load 4.40 lb |
| EMART | Spring clamp | 5/8 inch stud | Metal; 360 degree turn, 180 degree tilt; umbrella hole |
| Selens telescopic | Telescopic boom | Stand mount | Aluminum; 21.65 to 53.15 in; 360 degree swivel |
| fotoconic | Boom and crossbar | 1/4 inch interface | Metal; 21 to 49 in; locking swivel head grip |
| NEEWER CL-02 | Spring clamp, 2 pack | 5/8 inch stud | Metal body; reflector not included |
The 6 Best Reflector Holder Arms
1. K and F CONCEPT Clamp
A metal spring clamp with non-slip pads that grips a reflector, turns 360 degrees horizontally and tilts 180 degrees vertically. It has a 5/8 inch base with a 1/4-3/8 inch screw adapter and a locking screw hole in the middle for a soft umbrella handle.
Suits: a reflector on a light stand. Strengths: a wide tilt range and an umbrella hole. Weaknesses: no numeric load limit. Skip it if you need reach beyond the stand.
View K and F CONCEPT Photography Reflector Holder 5/8 inch Heavy Duty Metal Clamp on Amazon
2. YUOCU Extendable Arm
An aluminum boom with two bracket clips that hold a reflector, a telescopic length of 27.9 to 47.2 inches and a 360 degree swivel joint. The listing gives a load of 4.40 pounds and a 16 mm bottom socket with a side knob for attaching to a stand.
Suits: overhead or side reflector placement. Strengths: a stated load and a good reach. Weaknesses: you must supply a stand. Skip it if you only need a clip.
View YUOCU Extendable Reflector Holder Arm 27.9 to 47.2 inch Boom Arm on Amazon
3. EMART 5/8 Inch Clamp
A metal spring clamp with a non-slip pad that the maker says holds a large reflector. It rotates 360 degrees, tilts 180 degrees and has a hole for a locking screw that supports an umbrella. It connects to a stand through a 5/8 inch stud.
Suits: single-person shoots. Strengths: a simple build. Weaknesses: a similar spec to the K and F with no load limit. Skip it if you want a longer arm.
View EMART Photography Reflector Holder 5/8 inch Heavy Duty Metal Backdrop Clips on Amazon
4. Selens Telescopic Boom
An aluminum alloy cast telescopic holder with a length of 21.65 inches that extends to 53.15 inches and rotates 360 degrees. The maker says it can also support a flash, ring light or video light through its threads. A load figure is not given.
Suits: a long reach for large reflectors. Strengths: the longest extension of the booms. Weaknesses: no stated load. Skip it if you need a published weight limit.
View Selens Telescopic Reflector Holder Extendable Boom Arm 360 Degree Swivel on Amazon
5. fotoconic Boom and Crossbar
A metal holder that doubles as a boom arm and background crossbar, adjustable from 21 to 49 inches, with a 1/4 inch interface, a locking swivel head grip and a standard clip for reflector frames. The listing dimensions of 16 x 19 x 22.4 inches look like package size.
Suits: mixed light and reflector duty. Strengths: a 1/4 inch thread for monolights and LED lights. Weaknesses: an unclear dimension field. Skip it if you want a plain clamp.
6. NEEWER CL-02 Two Pack
Two metal spring clamps made for holding studio reflectors that attach to any light stand with a standard 5/8 inch stud. The listing says the main body is metal, notes a high load capacity and states that no reflector is included.
Suits: holding two reflectors. Strengths: two pieces in a pack. Weaknesses: sparse detail on tilt and rotation. Skip it if you need an adjustable arm.
View NEEWER 2 PCS Photo Studio Heavy Duty Metal Clamp Holder for Reflector on Amazon
Setup Notes
- Place a sandbag on the stand base before adding a long arm.
- Tighten each knob before letting go of the reflector.
- Check that a 5/8 inch stud or 16 mm socket matches your stand.
- Keep the reflector close to the stand to limit tipping.
Mistakes to Avoid
- Expecting a reflector to come in the box.
- Using a short stand with a long boom.
- Ignoring a stated load limit.
- Skipping the mount size on the listing page.
Reflector Holders FAQ
Which holders have a stated load?
The YUOCU lists 4.40 pounds. The others on this page do not give a number.
Which can hold an umbrella?
The K and F CONCEPT and EMART clamps list a screw hole for an umbrella handle.
The Short Version
For a clamp with an umbrella hole, the K and F CONCEPT or EMART. For a stated load, the YUOCU. For the longest reach, the Selens. For a crossbar as well, the fotoconic. For two clamps, the NEEWER CL-02.
