Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
RTReviewstookA clearer perspective
Music

6 Best Acoustic Guitar Pickups: Soundhole Picks (2026)

Six magnetic soundhole pickups for steel-string acoustics compared by coil design, preamp and cable, from Seymour Duncan and Fishman to L.R. Baggs and EMG.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

  • Seymour Duncan Woody Single Coil Maple Acoustic Guitar Pickup Search Amazon
  • Fishman Neo D Single Coil Magnetic Soundhole Pickup Search Amazon
See 4 more Amazon options
  • Dean Markley ProMag Grand Soundhole Acoustic Guitar Pickup, Humbucker Search Amazon
  • EMG ACS Acoustic Soundhole Pickup Search Amazon
  • L.R. Baggs M1 Active Acoustic Guitar Magnetic Soundhole Pickup Search Amazon
  • Fishman Rare Earth Humbucker Magnetic Soundhole Acoustic Pickup Search Amazon
Read the full guide ↓
Illustration of an acoustic guitar, keyboard and headphones in a music corner
AI-generated topic illustration; not a photograph of the specific products reviewed.

A soundhole pickup clips or wedges into the opening of a steel-string acoustic and sends the signal to an amp or PA through a cable. Because these are magnetic, they need steel strings, and they differ in coil design, preamp and housing.

The six pickups below are compared using the Amazon.com listing pages. We have not used these pickups ourselves, and every tone, hum or feedback claim is the maker’s own. Check your soundhole diameter and string type before you buy.

As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.

Illustration of an acoustic guitar, keyboard and headphones in a music corner
AI-generated topic illustration; not a photograph of the specific products reviewed.

What to Look For

Feature Why it matters
Coil design Single coils are described as brighter; humbuckers are meant to reduce hum
Passive or active Active models use a battery and a preamp; passive ones do not
String type Magnetic pickups do not work with nylon strings
Fit and cable Soundhole diameter and cable length affect setup

Specs at a Glance

Pickup Design Power Notes
Seymour Duncan Woody SC Single coil, maple housing Passive 14 ft cable; fits 3.75 to 4.0 in soundholes; steel strings only
Fishman Neo D Single coil Passive High-impedance, no battery; plug and play
Dean Markley ProMag Grand Humbucker, maple housing Passive 13 ft cable with 1/4 inch jack; up to 15x less hum per the maker
EMG ACS Not specified Active, onboard preamp Black; 9.44 oz
L.R. Baggs M1 Active Magnetic Active, 3V lithium cell Volume control; adjustable pole pieces; 1,000 hours per the maker
Fishman Rare Earth Humbucker Humbucker, neodymium magnets Passive per the name 1 year limited warranty; 9.28 oz

The 6 Best Acoustic Guitar Pickups

Top pickBest for bright steel-string tone

1. Seymour Duncan Woody Single Coil

A passive magnetic soundhole pickup in a maple housing. The maker describes a bright, clear tone for strumming and fingerstyle, a double-potted build that resists feedback, a 14-foot cable and no modification to the guitar. It fits soundholes from 3.75 to 4.0 inches and does not work with nylon strings.

Suits: bright steel-string tone. Strengths: a long cable and quick mounting. Weaknesses: a single coil may pick up more hum. Skip it if you play nylon strings.

View Seymour Duncan Woody Single Coil Maple Acoustic Guitar Pickup on Amazon

Best for a battery-free setup

2. Fishman Neo D Single Coil

A passive single-coil magnetic soundhole pickup in dark brown. The listing cites string-to-string balance and clarity, a low-profile high-impedance design with no battery, and plug-and-play installation with no alteration to the guitar. Weight is listed as 4 ounces.

Suits: a battery-free setup. Strengths: a light, simple design. Weaknesses: no volume control is mentioned. Skip it if you want an onboard preamp.

View Fishman Neo D Single Coil Magnetic Soundhole Pickup on Amazon

Best for a quieter signal on a plug-in setup

3. Dean Markley ProMag Grand

A humbucking soundhole pickup in a maple housing with an ebony piano finish. The maker says its patented coil layout gives up to 15 times less hum than competing pickups, mounts without permanent modification and comes with a 13-foot cable ending in a 1/4 inch jack. It is made for steel-string guitars.

Suits: a quieter signal on a plug-in setup. Strengths: a humbucking design. Weaknesses: the hum claim is the maker’s own. Skip it if you play nylon strings.

View Dean Markley ProMag Grand Soundhole Acoustic Guitar Pickup, Humbucker on Amazon

Best for a preamp-equipped option

4. EMG ACS

An active soundhole pickup with an onboard preamp, in black. The page is sparse: one bullet and a spec table that lists a 6.35 mm jack, a stainless steel enclosure and 9.44 ounces, along with odd fields such as 5 watts that we ignored.

Suits: a preamp-equipped option. Strengths: active circuitry. Weaknesses: little detail on the page. Skip it if you want a long spec sheet.

View EMG ACS Acoustic Soundhole Pickup on Amazon

Best for tweaking string balance

5. L.R. Baggs M1 Active

An active magnetic soundhole pickup that runs on one 3V lithium coin cell, included. The listing cites a volume control, adjustable pole pieces for balancing string types and gauges, feedback resistance and a battery life of 1,000 hours. It weighs 10.2 ounces.

Suits: tweaking string balance. Strengths: a volume control and pole pieces. Weaknesses: needs a battery. Skip it if you want a battery-free pickup.

View L.R. Baggs M1 Active Acoustic Guitar Magnetic Soundhole Pickup on Amazon

Best for a warmer humbucker tone

6. Fishman Rare Earth Humbucker

A humbucking soundhole pickup with neodymium magnets that the maker says gives a smoother treble and a warmer, more natural tone. The page carries a 1 year limited warranty and a weight of 9.28 ounces. Some fields, such as included components, look inconsistent, so confirm the contents on the page.

Suits: a warmer humbucker tone. Strengths: a humbucking design. Weaknesses: inconsistent listing fields. Skip it if you want a single coil.

View Fishman Rare Earth Humbucker Magnetic Soundhole Acoustic Pickup on Amazon

Setup Tips

  • Measure your soundhole and compare it with the listed fit range.
  • Check the strings are steel before ordering a magnetic pickup.
  • Turn the amp down before plugging in, then raise it slowly.
  • Keep the cable clear of the strings while you play.

Mistakes to Avoid

  • Buying a magnetic pickup for a nylon-string guitar.
  • Ignoring soundhole diameter.
  • Forgetting a spare battery for an active model.
  • Treating hum or tone claims as guarantees.

What a Soundhole Pickup Does to Your Tone

A magnetic soundhole pickup senses the vibration of steel strings directly, rather than the vibration of the guitar top. That is the key to understanding both its strengths and its limits. Because it hears the strings, the signal is strong, easy to amplify and not heavily affected by the body of the guitar. It also means the sound is not a recording of the whole acoustic instrument. Expect a tone that is a little more focused and electric in character, with less of the woody air and top resonance you hear when you play unplugged.

For many players that is fine, or even desirable. Strummed rhythm guitar, folk and country playing, busking, practice and rehearsal rooms are all places where a simple, dependable plug-in sound is more useful than a perfect acoustic copy. Magnetic pickups also tend to be less prone to feedback at stage volume than a microphone, which is why they have long been used by players who need to be heard over other instruments.

How the pickup shapes tone depends on its design. Single-coil models are generally described as brighter and more open, while humbuckers use two coils to cancel some of the hum that single coils pick up. Active designs add a preamp that can raise level and shape tone. Details are in the product listing, and any claim about tone is the maker’s own, so treat descriptions as a guide rather than a promise.

It is worth thinking about the sound you want before shopping. If your goal is to reproduce the natural sound of the guitar, you may want to compare other pickup types. If you want a simple, strong signal for amps and a PA, a soundhole pickup is a sensible starting point.

Checking Soundhole Fit and Installation

Fit is the most practical consideration. Soundhole pickups are designed for a range of diameters, and the listing usually gives a size range. Measure your guitar’s soundhole with a ruler or a tape, and compare it with the stated range. A pickup that is too large will not seat, while one that is too small may slip or sit crooked. If your guitar has a thin or unusual soundhole edge, or a large cutaway near the hole, pay attention to the clamp or mounting method described.

Look at how the pickup attaches. Many use rubber-padded clamps or a wedge that presses against the sides of the soundhole, and installation is usually removable and does not require drilling. That is a big advantage if you do not want to alter the guitar. Check that the pads are soft enough not to scratch the finish, and place a small piece of cloth if you are unsure. Avoid over-tightening, since pressure on the edge can mark the wood or damage a thin rosette.

Consider the position relative to the strings. The pickup should sit centered under the strings, with a gap that matches the manufacturer’s instructions. Too close can cause distortion or magnetic pull on the strings, and too far reduces output. Most listings include a setup guide, so follow that and adjust slowly.

  • Verify your strings are steel, since magnetic pickups do not work with nylon strings.
  • Check that the pickup will not touch the strings or the fretboard.
  • Route the cable so it does not catch on your arm while playing.
  • Remove the pickup for travel if the guitar case is tight.

Passive Versus Active, and What Goes Between Guitar and Amp

A passive pickup has no battery and no built-in electronics. It sends a weaker signal that depends on the input of the device it connects to. An active pickup includes a preamp, usually powered by a battery, that boosts the signal and may add tone shaping. Each has advantages. Passive designs are simple and never leave you with a dead battery, but they work best into a good input and may sound thin or quiet into some mixers. Active designs are stronger and more consistent, but you must manage the battery and accept more parts.

Whichever you choose, the rest of the signal chain matters. A typical acoustic amp or PA input suits most pickups. A guitar amp can work too, but the tone may be more electric. Many players add a small preamp or direct box between the pickup and the sound system. A preamp can adjust gain, add equalization and help match impedance, which is the electrical relationship between the pickup and the input. Details vary by product, so check the manual for recommended setups.

Cable quality and length affect noise. A short, well-shielded cable reduces hum, while a very long run can pick up interference. Keep the cable away from power supplies and dimmers when possible. If your pickup has a jack on the body, confirm whether it needs a particular type of cable.

Think about your normal gig or practice space. A bedroom player with a small amp has different needs from a performer using a venue’s sound system. Choose the simplest chain that gives a reliable signal.

Controlling Hum, Feedback and Noise

Magnetic pickups are sensitive to electrical noise. Single-coil designs in particular can pick up hum from lights, amps and electronics, and humbuckers are meant to reduce it. If you hear buzz, try moving away from dimmer switches, fluorescent lights and computer monitors. Turn the guitar slightly and listen for the noise to change. Use a different power outlet, or a power conditioner if you use powered gear, and check that cables are in good condition.

Feedback is a different issue. At high volume, the sound from the speaker can excite the guitar body and strings, producing a howl. Magnetic pickups tend to resist this better than microphone-based systems, but it can still happen. Reduce volume or bass, face the amp away from the guitar, or use a soundhole cover if you play loudly. A cover blocks the hole and reduces body resonance, which can help in loud stages, but it also changes the unplugged sound.

Other noises can come from a loose pickup or cable. A clamp that vibrates against the wood can buzz, and a cable that rubs on the guitar can make scratchy sounds. Secure everything and test by strumming firmly before a performance.

  • Check every cable and connector for loose or crackling parts.
  • Replace weak batteries before important performances.
  • Roll off excess treble if the sound is harsh.
  • Use a tuner and check string condition, since old strings sound dull even through a pickup.

Care, Batteries and When to Upgrade

Soundhole pickups are simple, but a little care helps them last. Wipe the pickup and clamps with a soft dry cloth after use, and keep it away from heat and moisture. Store it in a protective pouch or case, with the cable wound loosely so it does not kink. If rubber pads become sticky or deteriorate, replace them or contact the manufacturer for parts.

For active models, watch the battery. Remove the battery if you will not use the pickup for a long time, since leakage can damage the electronics. Carry a spare and learn how to replace it quickly. Many players change batteries on a schedule rather than waiting for the sound to fade. Check the listing for the type of battery and where it is located.

Know when it might be time to move on. Signs include persistent noise that cleaning cannot fix, a weak or cutting-out signal, cracked housing and a sound that no longer matches your needs. Sometimes the problem is not the pickup but the cable, the amp or the guitar’s strings, so check those first.

As you improve or perform more, you might want a different sound. Players often start with a simple soundhole pickup and later add a different type for a more natural acoustic tone, or use both together. Think about how much you will use it, whether you need the guitar to stay unmodified and how important convenience is. A pickup that is easy to install, easy to remove and reliable in your setup is usually the one you will use most.

Acoustic Guitar Pickups FAQ

Which ones need a battery?

The L.R. Baggs M1 lists a 3V lithium cell. The EMG ACS is described as active, so check its page for power details.

Which are humbuckers?

The Dean Markley ProMag Grand and the Fishman Rare Earth are listed as humbuckers.

Will a soundhole pickup work on a nylon-string guitar?

Generally no. Magnetic pickups sense steel strings, so nylon strings produce little or no signal. Check the listing and consider other pickup types for classical guitars.

Does it need drilling or permanent installation?

Most soundhole pickups clamp or wedge into the hole and can be removed without tools. Always check the listing for installation details. Take care not to scratch the finish.

Why does my pickup hum?

Single-coil designs can pick up electrical noise from lights, amps and electronics. Moving away from the source, changing outlets or checking cables often helps. Humbucker designs are meant to reduce hum.

Can I use it with a regular guitar amp?

Often yes, and the tone may sound more electric. An acoustic amp or PA input may suit it better. A small preamp can help match levels.

What is a soundhole cover for?

It blocks the hole to reduce body resonance and feedback at high volume. It also changes the unplugged tone, so many players use it only on loud stages.

How often should I change the battery in an active pickup?

It depends on the model and how often you play. Check the listing for battery type and any life estimate, and carry a spare. Remove the battery during long storage.

Do old strings affect the pickup sound?

Yes. Worn strings sound dull and lose output, and a magnetic pickup will pass that along. Fresh steel strings often improve clarity and level.

The Short Version

For bright single-coil tone, the Seymour Duncan Woody SC. For a battery-free setup, the Fishman Neo D. For a humbucker with a long cable, the Dean Markley ProMag Grand. For an active preamp, the EMG ACS. For pole-piece balance, the L.R. Baggs M1. For neodymium magnets, the Fishman Rare Earth.