Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
RTReviewstookA clearer perspective
Camera Comparisons

Ilford Pan F 50 vs Kodak T-Max 100: Slow Film Compared

Compare Ilford Pan F Plus 50 with Kodak T-Max 100 black and white films by speed, grain, and use case, and find out which slow film suits your shooting.

We may earn a commission from qualifying purchases. How we pick products

Illustration of a stockpot, skillet, Dutch oven and wok in a kitchen
AI-generated topic illustration; not a photograph of the specific products reviewed.

Ilford Pan F Plus 50 is an ultra-fine-grain, very slow black and white film, while Kodak T-Max 100 is a fine-grain film with a speed of ISO 100 that is easier to use handheld. Choose Pan F Plus 50 for maximum detail in bright light, and T-Max 100 for a flexible, modern slow film.

Illustration of a stockpot, skillet, Dutch oven and wok in a kitchen
AI-generated topic illustration; not a photograph of the specific products reviewed.

What Each Film Is For

Pan F Plus 50 has a box speed of ISO 50, which makes it one of the slowest black and white films still on the market. It is often used for landscapes, architecture, and studio portraits where you can use a tripod or bright light. T-Max 100 uses a modern tabular grain and is a common choice for portraits, travel, and general use in good light. Check the maker’s pages for formats and availability.

Key Differences

Trait Pan F Plus 50 T-Max 100
Box speed ISO 50 ISO 100
Grain Extremely fine Very fine
Contrast Tends to be higher and punchy Moderate and smooth
Grain technology Traditional Tabular
Handheld use Needs bright light or wide apertures Easier in daylight

The One-Stop Gap

The difference between 50 and 100 is one stop. In practice, that means Pan F Plus 50 needs twice the light, so a shutter speed that works on T-Max 100 may be too slow on Pan F. In full sun, both are comfortable. In open shade or overcast weather, you may need a tripod or a wider aperture with Pan F Plus 50.

Practical Notes

  • Detail: Pan F Plus 50 gives very fine detail, which suits medium format and large prints.
  • Tones: Pan F tends to be contrasty, so careful metering and gentle development help hold highlights.
  • Versatility: T-Max 100 gives extra shutter-speed margin and smooth tones, which suit portraits.
  • Development: Both respond to standard developers. Use the makers’ data sheets as a base and adjust to your taste.

How to Choose

  1. Think about how you shoot. If you often use a tripod, try Pan F Plus 50.
  2. If you shoot handheld in mixed light, T-Max 100 is easier to live with.
  3. Shoot one roll of each in the same scene and develop them the same way.
  4. Compare scans at 100 percent, then look at a print or a full-screen view.

Exposure and Metering With Slow Film

Slow film leaves less room for error in low light, so careful metering matters. Both films benefit from a habit of metering for the shadows you want to keep detail in, then letting the highlights fall where they will. Black and white negative film generally handles a little overexposure better than underexposure, because shadow detail that was never recorded cannot be recovered later. If you are unsure, giving the film a touch more exposure is a common precaution.

With a box speed of ISO 50, Pan F Plus 50 will push you toward slower shutter speeds or wider apertures than a faster film in the same light. Do the arithmetic before you leave the house. Check the lowest shutter speed you can hold steady with your lens and ask whether the light will allow it at a sensible aperture. If not, bring a tripod, a cable release or a faster film for backup. T-Max 100 gives you one stop of margin, which can be the difference between a sharp frame and a blurred one in open shade.

  • Use a handheld meter or the camera meter, and confirm how it was calibrated.
  • Be careful with backlit subjects, which can fool the meter into underexposing.
  • Note the exposure compensation you apply, so you can learn from the results.
  • Check reciprocity guidance on the maker’s data sheet if you use long exposures.

Keeping notes in a small book during the first rolls speeds learning.

Development Choices and Contrast Control

Development shapes the final look as much as the film. Time, temperature, agitation and developer choice all affect contrast, grain and tonal range. Pan F Plus 50 tends to be contrasty, so many photographers use gentler development, a developer known for softer results or slightly shorter times to hold highlights. T-Max 100 usually gives a smoother curve and often needs less adjustment to keep the highlights under control.

Start from the maker’s recommended times for your developer and dilution, and make changes only after you have judged a few rolls. Change one variable at a time so you know what caused the difference. If you send film to a lab, tell the staff about your preferences, or ask how they develop and whether they offer different options. Consistent development makes it easier to compare films fairly.

  • Keep temperatures steady, as small changes shift contrast.
  • Agitate in the same pattern each time.
  • Use fresh chemicals or follow the capacity guidelines for reused ones.
  • Write the development details on the negative sleeve for future reference.

Over time, you will find a routine that gives the tones you prefer from each film.

Scanning, Printing and Grain Expectations

How you view the negatives influences how much the grain difference matters. In small prints or on a phone screen, both films will look very fine. The difference appears in large enlargements or in scans viewed at full size. A film with finer grain can support a bigger enlargement before the grain becomes visible, which is why slow films are popular in medium and large formats and for architecture and landscapes.

Scanning adds its own factors. Scanner resolution, focus and software settings determine how much detail you capture from the negative. High-contrast films can be a challenge to scan if the shadows and highlights are far apart, so check that the scan holds detail at both ends. A flatter negative may scan easily and then respond to adjustments in editing. In the darkroom, higher-contrast films may work well with lower paper grades, and smoother films may suit a wider range of paper choices.

  • Scan a few frames at different settings to find what works best.
  • Check for dust and scratches, which show more on fine-grain film.
  • Print or view at the size you intend to use before deciding.
  • Keep negatives in archival sleeves, away from heat and humidity.

Expectations should be tuned to the format you shoot. Grain is less visible on larger formats, so the choice depends on your workflow.

Format, Availability and Storage Checks

Before you buy a lot of film, confirm which formats each stock is sold in. Availability can change, so check retailers and the makers’ pages for 35mm, 120 and sheet film. If you shoot a medium format camera, check the number of frames per roll for your camera, and be sure you have the right type of spools and the correct holder.

Film is perishable, so storage is important. Heat and humidity can damage unexposed film and raise fog. Keep rolls in a cool, dry place, and take a note of the expiration date on the box. Film that has been stored well can remain usable past its date, though results may vary. Avoid leaving film in a hot car. When traveling, ask for hand inspection at airport security if the scanner is a concern, and check the current guidance of the airport.

  • Label exposed rolls with the date and any special development request.
  • Develop within a reasonable time, because latent images fade slowly.
  • Buy a few rolls first to test before stocking up.
  • Keep film out of direct sunlight.

Planning the supply side prevents frustration when a favorite stock is hard to find.

Matching the Film to the Subject

Think about the typical subjects and conditions you photograph. If you mostly shoot landscapes from a tripod in good light, the slower film gives you fine detail and punchy tones. For studio portraits with controlled lighting, either film can work, and the choice becomes a matter of taste: some prefer the crisp look of the slower film, while others like the gentler gradation of the other.

For travel, where light changes quickly and you may be carrying less equipment, a film with an extra stop of speed is more forgiving. For architecture, where straight lines and fine texture matter, the extra detail of the slower film may justify the care it asks of you. For street photography in daylight, either can work, though the faster film gives more freedom with shutter speed and depth of field.

  • Choose a film for the most demanding situation you expect.
  • Consider carrying a second, faster roll for low-light moments.
  • Try both on the same subject to see which suits your taste.
  • Remember that technique and light often matter more than the film choice.

The right film is the one that fits your habits and gives you results you enjoy.

FAQ

Is Pan F Plus 50 hard to use?

It is not hard, but it demands light. With a tripod or a bright day, it is simple. Handheld in dim scenes, it is limiting.

Does T-Max 100 look different from traditional film?

It has a smoother, more modern look because of its tabular grain. Some photographers like the clean results, while others prefer the texture of older emulsions.

Can I shoot Pan F Plus 50 at a different speed?

Some photographers rate film at other speeds and adjust development, but results vary. Test on a single roll and check the maker's data sheet for any guidance.

Which film is better for portraits?

Both can work well. T-Max 100 is often chosen for smooth tones and flexibility, while Pan F Plus 50 suits portraits in bright or controlled light where its fine grain and contrast are an advantage.

Do I need a tripod with these films?

It depends on the light. In bright daylight you may shoot handheld, but in shade or indoors a tripod is useful, especially with the slower film.

How should I store exposed film?

Keep it cool, dry and away from sunlight, and develop it within a sensible time. Label the roll so you know what is on it.

Are these films suitable for scanning at home?

Yes, both are commonly scanned. Fine grain places high demands on scanner focus and resolution, so test your equipment and settings.

Can I use a red or yellow filter with these films?

Black and white films respond to colored filters by darkening or lightening certain colors. Remember to add the light loss to your exposure, and check the filter's instructions.

Is it worth buying a bulk roll?

It can reduce cost per frame if you shoot a lot, but you need reusable cassettes and a way to load them. Start with ordinary rolls first.

The Short Version

Choose Pan F Plus 50 when you want the finest grain and can supply plenty of light or a tripod. Choose T-Max 100 when you want a fine-grain film with more flexibility. Confirm formats and details with each maker.