Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.
A mount keeps the bar above or below the TV. Check weight limits and depth.
This guide is built from Amazon product listings, not our own testing, so confirm channels, ports, compatibility and current price on each product page.
Check price on Amazon for the current price before you buy.
Last updated: October 31, 2026.

In this guide
Quick Picks
| Product | Type | Best for |
|---|---|---|
| USX MOUNT Soundbar Mount (Multi-Brand) | Soundbar mount | Cheapest universal |
| Universal Soundbar Wall Mount Bracket | Wall bracket | Depth adjustable 3.5 to 6.1 inches |
| USX MOUNT Above or Under TV Mount | Soundbar mount | Above or under TV |
| Perlegear Soundbar Mount | Soundbar mount | Adjustable height, up to 15 lbs |
| Premium Heavy-Duty Soundbar Wall Mount (33 lbs) | Wall bracket | Heavy duty steel |
| USX MOUNT Universal Soundbar Mount | Soundbar mount | Fits TV VESA 150-600mm |
Our Picks
Top pickBest for cheapest universal
1. USX MOUNT Soundbar Mount (Multi-Brand)
A USX MOUNT soundbar mount for Samsung, Sony, LG, Vizio, Bose, onn and more, per the listing. Check price on Amazon.
Good for: Cheapest universal. Watch out: check weight limit.
Best for depth adjustable 3.5 to 6.1 inches
2. Universal Soundbar Wall Mount Bracket
A soundbar wall mount bracket for Samsung, LG, Sony, JBL, Vizio, Sonos and more, depth adjustable 3.5 to 6.1 inches, per the listing. Check price on Amazon.
Good for: Depth adjustable 3.5 to 6.1 inches. Watch out: check weight limit.
Best for above or under TV
3. USX MOUNT Above or Under TV Mount
A USX MOUNT soundbar mount for mounting above or under a TV that fits most soundbars, per the listing. Check price on Amazon.
Good for: Above or under TV. Watch out: check weight limit.

Best for adjustable height, up to 15 lbs
4. Perlegear Soundbar Mount
A Perlegear soundbar mount with adjustable height for mounting under or above a TV, up to 15 lbs, per the listing. Check price on Amazon.
Good for: Adjustable height, up to 15 lbs. Watch out: check weight limit.
Best for heavy duty steel
5. Premium Heavy-Duty Soundbar Wall Mount (33 lbs)
A premium universal soundbar wall mount bracket, flat-bottom, 33 lbs, heavy duty steel with adjustable depth, per the listing. Check price on Amazon.
Good for: Heavy duty steel. Watch out: check dimensions.

Best for fits TV VESA 150-600mm
6. USX MOUNT Universal Soundbar Mount
A USX MOUNT universal soundbar mount that fits TV VESA 150 to 600mm and up to 17.6 lbs, per the listing. Check price on Amazon.
Good for: Fits TV VESA 150-600mm. Watch out: needs VESA TV.
Best Picks by Category
These labels summarize listing data and are not hands-on test results.
- Highest listed rating (limited feedback): Premium Heavy-Duty Soundbar Wall Mount (33 lbs). This is not an independent product-quality award.
- Most reviewed: USX MOUNT Universal Soundbar Mount.
- Best value: Universal Soundbar Wall Mount Bracket.
- Lowest price: USX MOUNT Soundbar Mount (Multi-Brand).
- Premium option: USX MOUNT Universal Soundbar Mount.
Price, Rating and Review Comparison
The table lists the picks with their price tier. Prices change often, so confirm the current price on Amazon.
| Product | Price | Rating | Ratings | Price tier |
|---|---|---|---|---|
| USX MOUNT Soundbar Mount (Multi-Brand) | Check price on Amazon | — | — | Budget |
| Universal Soundbar Wall Mount Bracket | Check price on Amazon | — | — | Budget |
| USX MOUNT Above or Under TV Mount | Check price on Amazon | — | — | Mid-range |
| Perlegear Soundbar Mount | Check price on Amazon | — | — | Mid-range |
| Premium Heavy-Duty Soundbar Wall Mount (33 lbs) | Check price on Amazon | — | — | Mid-range |
| USX MOUNT Universal Soundbar Mount | Check price on Amazon | — | — | Mid-range |
How Much Feedback Backs Each Rating
A high average from a handful of ratings is weaker evidence than a slightly lower average from thousands.
How to Choose
Weight
Check the limit.
Depth
Match the bar.
VESA
Some attach to the TV.
Bracket Styles Compared
Soundbar mounts fall into a few broad styles, and knowing the differences narrows the choice quickly. A wall bracket fixes directly to the wall and holds the bar on two arms or a flat shelf. It suits a bar that sits under or over a wall-hung television, and it keeps the weight on the wall rather than on the screen. A TV-attached mount uses the television’s rear mounting holes and clamps the bar to the display. That can look tidy and needs no extra holes in the wall, but it depends on the television having compatible mounting points and enough spare rating for the added load.
Some brackets are flat-bottomed, which lets the bar rest on a ledge, while others hold the bar by screws through its back. A rest-style bracket is forgiving if your bar has no screw points, but the bar may slide if it is bumped. Screw-fixed styles feel more secure but demand that the bar actually has the threaded inserts or keyhole slots.
- Wall bracket: independent of the TV, suits most wall layouts.
- TV-attached mount: neat, but check the TV’s own load guidance.
- Ledge or flat-bottom style: simple, relies on the bar’s shape.
- Adjustable-depth arms: help when the bar and TV sit at different distances from the wall.
Read each listing to see which style it describes, since product names alone do not always make that clear.
Wall Types and Fixings
The wall matters as much as the bracket. A mount rated for a certain load is only as strong as the anchor holding it, and different walls need different fixings. Solid timber studs generally accept wood screws well. Masonry such as brick or concrete needs a drill bit and plugs suited to that material. Hollow plasterboard on its own is a weak anchor point and is better served by heavy-duty fixings made for hollow walls or by locating a stud.
Check what ships in the box. Some mounts include a bag of screws and plugs, but these are often basic and may not match your wall. If the listing does not mention hardware, assume you may need to buy suitable fixings separately, and follow the maker’s manual for their size and type.
Before drilling, scan for hidden hazards. Pipes and electrical cables can run behind a wall, and a stud finder or a detector can reduce the risk. If you are unsure, ask a qualified installer, since a wrong hole can be costly and unsafe.
- Match the plug to the wall material, not just the screw size.
- Use studs where possible for the strongest hold.
- Keep a spare set of screws in case a hole is misaligned.
- Follow local building rules and the maker’s instructions.
Renters should check the lease before drilling.
Marking, Levelling and Installing
A calm, methodical install prevents most problems. Start by holding the bar where you want it and deciding on the final position relative to the television and any shelf below. Mark the wall lightly with a pencil, then use the paper template if one came with the mount. A spirit level on the bracket confirms it is straight before any hole is drilled, and a second person holding the bar makes the job far easier.
Drill pilot holes at the marked spots, insert the plugs, and fasten the bracket without fully tightening at first. Sit the bar on the arms, check it is level, and then snug everything down. If the bar has keyhole slots, confirm that it clicks or drops into place before letting go.
Leave slack in the cables so nothing pulls on the bar’s connectors when it is moved. Run the power lead and any signal cable before the final tighten so you are not forced to reach behind a fixed unit.
- Check the template against the bar’s own mounting hole spacing.
- Level the bracket before and after the bar is fitted.
- Test the grip gently by hand, not with a hard shake.
- Re-check fixings after a few weeks as the load settles.
If something feels loose, stop and refit rather than hoping the hardware will cope.
Sound, Clearance and Remote Reach
Where the bar sits affects how it sounds and how it works with the rest of your setup. A bar mounted too close to a wall behind it can make sound muddy, and a bar tucked behind a shelf lip may muffle its front. Leave open space in front of the speaker grille. Check that the bar’s ports, vents and buttons are still reachable after fitting.
Think about the television’s infrared sensor. A bar placed directly under the screen can block the sensor, so a slightly lower position or a small gap is often needed. Likewise, the bar’s own remote receiver should not be hidden by the bracket arms.
Depth also matters. A bar that sticks out further than the television can look awkward, and a deep bar on a very shallow bracket may press against a screen. Adjustable-depth arms help match the two, as long as the listing says the range suits your bar.
- Keep the grille clear of obstacles.
- Confirm the remote sensors on both devices stay visible.
- Leave room for airflow around the back of the bar.
- Check cable bend room so connectors are not strained.
A small test with the bar held in place before drilling can save a lot of rework.
Common Mounting Mistakes
Most failed installs trace back to a few predictable errors. The first is trusting the weight rating on the box without considering the wall. The second is skipping the manual and assuming the screws supplied fit any surface. A third is mounting too close to the television so the bar blocks a sensor or the picture. A fourth is forgetting cables until the bar is already fixed in place and the connectors are hard to reach.
Another mistake is buying a mount without checking whether the bar has the mounting points the bracket needs. A bar with a smooth, flat back and no inserts will not work with a screw-fixed bracket, no matter how sturdy it is. Likewise, a TV-attached mount only helps if the television’s rear holes line up with the bracket.
- Do not rely on one fixing in a weak wall.
- Do not force a bar into a bracket that does not match its holes.
- Do not leave cables tight or hanging loose behind the unit.
- Do not skip a level check before tightening.
Replace a mount if you see bending, cracks, a loose arm or worn plastic parts, and never keep using hardware you no longer trust to hold a heavy audio unit above head height.
Which soundbar wall mount should you buy?
The right soundbar wall mount is the one that matches your soundbar’s weight, your TV position and your wall. Use the needs below to narrow the six picks, then confirm the details on the listing.
- Lowest cost, many brands: the USX MOUNT Soundbar Mount (Multi-Brand) is the cheapest universal option in this guide. Check its weight limit against your bar first.
- A bar with an unusual depth: the Universal Soundbar Wall Mount Bracket has adjustable depth, which helps when the bar sits closer to or further from the wall than usual.
- Bar above or below a wall-mounted TV: the USX MOUNT Above or Under TV Mount is built for that placement.
- Height fine-tuning: the Perlegear Soundbar Mount offers adjustable height, which suits a bar you want to line up precisely with the screen edge.
- A heavy bar or subwoofer-style unit: the Premium Heavy-Duty Soundbar Wall Mount (33 lbs) is the sturdier steel choice.
- A bar attached to the TV’s VESA holes: the USX MOUNT Universal Soundbar Mount is the one aimed at that setup.
If two picks both fit, choose the one whose hole pattern or arm length matches your soundbar’s mounting points most closely.
What to check before you buy a soundbar mount, and who should skip it
Before you buy a soundbar mount, confirm that it fits your bar and your wall, because those two checks prevent most returns. Then weigh the trade-offs honestly.
- Your soundbar’s weight against the mount’s stated limit, with some margin.
- Whether your bar has keyhole slots, threaded inserts or neither, and which the mount uses.
- Included hardware: check whether screws and anchors suit your wall type or whether you must buy them.
- Clearance around the TV stand, shelf or fireplace where the bar will sit.
- The return terms and warranty shown on the listing.
A cheaper bracket is fine for a light bar, but it usually leaves you to supply better fixings and to level the bar by eye. Paying more generally buys more adjustment, a higher stated load limit or a neater fit, not better sound.
You can skip a wall mount if your soundbar sits happily on a stand under the TV, if you rent and cannot drill, or if the wall behind the TV is too crowded with cables to work around. A shelf may be the simpler answer in those cases.
Also think about the cables. Leave enough slack for the HDMI and power leads to reach the bar without tension, and check that the ports on the back stay accessible once the bar is on the bracket. Fitting the cables before you tighten everything down saves a second round of adjustments later.
Compare the picks above, check the current listing for size and what is included, then choose the one that fits how you will mount your bar.
Each Mount in This Guide, Judged by the Job It Has to Do
All six mounts promise to get a soundbar off the furniture and onto the wall or the television, but they differ in how they carry weight, how they adjust and how forgiving they are of awkward soundbar designs. The notes below stay with the picks already reviewed above and look at the installations where each style shines, where it struggles and what to check before you commit to holes in the wall.
The multi-brand wall mount as the safe general choice
The first USX MOUNT pick suits the common case: a mainstream soundbar, a flat wall and an owner who wants a secure, level result without improvising hardware. Its strength is compatibility with the mounting patterns found on many popular bars, which reduces the risk of discovering on installation day that the brackets and the bar refuse to meet. It is less exciting for unusual installations, such as a bar that must sit a long way below a high television, where a mount with greater drop or extension may serve better. For most living rooms, though, boring and compatible is exactly what you want from something that holds equipment above your floor.
Universal brackets, television-attached mounts and the heavy-duty option
The universal bracket pick appeals when the soundbar brand is obscure or the bar has an awkward base, because adjustable arms can adapt where fixed brackets cannot. The television-attached USX MOUNT and the Perlegear pick solve a different problem: they move with the television, which is ideal on a swivelling wall bracket or in a rental where drilling the wall is unwelcome, and they keep the bar aligned with the screen. The heavy-duty mount exists for the heaviest bars and for owners who value a generous safety margin over the slimmest profile. Match the style to the problem in front of you rather than buying the strongest mount for a light bar or the lightest mount for a heavy one, because both mismatches create work without adding safety.
Checking Your Soundbar and Wall Before You Order
Turn your soundbar over and look at its underside and rear panel before you order anything. Note whether it has threaded inserts, keyhole slots or no fixing points at all, and measure the distance between any fixing points so you can compare it with the adjustment range of the mount. Weigh the bar or find its weight in the manual, then keep a sensible margin below the stated capacity of the mount. Next, examine the wall. Plasterboard over studs, solid masonry and dot-and-dab construction each need different fixings and offer different strength, and the screws in the box may not suit your wall even when the mount itself is perfect for the bar.
Also check the practical clearances that listings rarely mention. The bar needs room for its cables to leave the rear panel without being crushed against the wall, the remote sensor needs a clear view of the room, and any upward-firing drivers need open space above. If the television sits on a bracket that tilts, confirm the mounted bar will clear the wall and the television bezel through the full range of movement. These checks take minutes at a desk and save the far longer job of filling holes and starting again.
Getting a Level, Secure Result on the Day
Mark the wall with the television already in its final position, because the bar should relate to the screen and to your seated eye line, not to the floor or the ceiling, either of which may be slightly out of level. Use a spirit level or a laser if you have one, drill pilot holes appropriate to your fixings, and fit the brackets loosely before offering the bar up for a final check. Tighten evenly, confirm the bar cannot slide sideways or tip forward, and only then connect cables with enough slack that they are not holding any of the bar weight. Step back to your seat, check the bar looks level against the television, and test the remote from every seat you use.
Aftercare and Changing Equipment Later
A mount is not quite a fit-and-forget product. Check the fixings after the first week and again after a few months, especially on plasterboard, and re-tighten anything that has settled. Keep the spare screws, spacers and instructions together, because a future soundbar will almost certainly need a different combination of them. If you redecorate or move the television, treat the bar mount as a fresh installation and re-check the wall rather than trusting the old holes. Owners who keep the hardware and follow that routine usually find that a good mount outlives two or three soundbars, which is where its real value lies.
More Practical Guidance Before You Decide
Measure twice, because accessories punish guesswork
With mounts, cables and stands, nearly every disappointment comes from a measurement that was assumed rather than taken. Measure the television, the soundbar and the furniture as a set: the width of the bar against the width of the stand, the depth of the shelf against the depth of the bar feet, and the distance from the wall to the viewing seat against the cable length you plan to run. Write the numbers down and compare them with the listing details for the exact pick you are considering. Five minutes with a tape measure prevents the most common returns in this category, which are almost never about sound quality and almost always about fit.
Plan the cable path before anything goes on the wall
Decide where power and signal cables will run before you drill, assemble or push furniture back into place. Cables should reach their ports with a little slack, without sharp bends, without being trapped under a stand foot or behind a bracket, and without crossing walkways where they will be tugged. If you plan to hide cables, check what your wall construction allows and keep access to at least one end of each run so a faulty cable can be swapped later. A tidy installation that cannot be serviced becomes a problem the first time a connection needs attention, so neat and reachable beats invisible and sealed.
Safety checks that matter more than appearance
Anything that holds a television or a soundbar above floor level deserves a calm safety check once it is installed. Confirm that fixings are in solid material or in the correct anchors for your wall type, that brackets are level and fully tightened, and that the combined weight sits comfortably within the stated capacity of the mount or stand with headroom to spare. Tug gently, watch for flex, and re-check after the first week as fixings settle. Keep the setup out of reach of climbing children, route cables so they cannot pull the bar forward, and never balance a soundbar on a mount or shelf that was designed for something lighter.
A calm installation order that avoids most mistakes
Work in a fixed order: unpack and lay out every part, read the instructions for your specific pick all the way through once, prepare the wall or furniture, fit the hardware loosely, offer the equipment up and check levels and clearances, and only then tighten everything fully. Keep the original fixings and any spare screws together in a labelled bag, because the same mount or stand often needs different screws for a future television or bar. Photograph the rear connections before you push anything against the wall. That single habit saves a surprising amount of guesswork when you later add a streamer, a console or a replacement cable.
Care, checks and small adjustments over time
Installations loosen and rooms change. Every few months, check that bracket screws are still snug, that a stand still sits level on its feet or castors, and that cables have not worked loose or become pinched as furniture has moved. Dust around ports and vents with a soft brush, and re-level a bar that has been knocked during cleaning. If you move house or replace the television, treat the accessory as a new installation rather than assuming the old measurements still hold. The picks in this guide are simple products, and their long, trouble-free service mostly depends on these small, unglamorous checks.
Matching the accessory to the equipment you will own next
Televisions and soundbars change more often than the furniture and brackets around them, so a little headroom is valuable. A mount with a generous weight capacity and a wide range of hole patterns, a stand with adjustable height, or a cable with a little extra length and the newer connection standard will often serve the next piece of equipment as well as the current one. That said, do not buy oversized hardware for a compact setup you know will stay compact, because bulkier accessories can look clumsy and cost more to install. Balance future flexibility against the room and equipment in front of you today.
Real-World Scenarios and Long-Term Ownership
Scenario: a rented home where drilling is limited
Renters need installations that can be undone cleanly. Favour the picks and methods in this guide that attach to the television itself, sit on existing furniture or use fixings that leave minimal marks, and keep every original part so the equipment can be restored when you move. Photograph the wall and the setup before you start, agree any permanent fixing with the landlord in writing where your tenancy requires it, and keep cables surface-run and tidy rather than buried. A slightly less invisible installation that leaves your deposit intact is the correct engineering choice for a rented room, however tempting a fully hidden result looks in photographs.
Scenario: a family room that gets rearranged often
Some rooms change with the seasons, with guests and with children growing up. Accessories earn their keep in such rooms when they tolerate change: stands that roll or swivel without drama, mounts that accept a different bar later, and cables long enough to survive a new layout. When you compare the picks, ask how each one behaves on the day the sofa moves to the other wall. Hardware that only works in one exact arrangement becomes an obstacle, while adaptable hardware quietly supports the room for years. That adaptability is a genuine feature, even though it never appears in a specification list.
Checking compatibility when brands differ
Mixed-brand setups are normal: a television from one maker, a bar from another and an accessory from a third. Compatibility then depends on physical standards rather than on badges. For mounts and stands, the shared language is measurements, hole patterns and weight, so compare those numbers directly instead of searching for your bar model in a compatibility list that may simply be out of date. For cables, the shared language is the connection standard and the version both devices support. When the numbers and standards agree, mixed brands work together happily; when they do not, no badge on the box can rescue the combination.
Tools and preparation that make installation day calm
Gather the tools before you begin: a tape measure, a pencil, a level, the correct screwdrivers or driver bits, a drill with suitable bits for your wall, and a container for screws so nothing migrates into the carpet. Check you have the fixings your wall actually needs, which may differ from those in the box. Clear the floor, protect the screen and the bar with a soft blanket, and keep a second pair of hands available for any moment when equipment must be held while fixings are tightened. Installations go wrong through rushing and improvisation far more often than through difficult hardware, and preparation is the cheapest fix of all.
What to do when something does not fit
Stop, put the equipment down safely and re-measure before reaching for force or for a drill. A bracket that almost lines up, a cable that almost reaches and a stand that almost balances are all telling you the same thing: one of your assumptions about size, pattern or weight is wrong. Recheck the manual for your exact pick, because many mounts and stands include alternative arms, spacers or screw sets that solve the problem legitimately. If the combination genuinely cannot work, a returned accessory is a minor inconvenience, while a damaged television, bar or wall is a major one. Patient installers finish faster than forceful ones.
Keeping receipts, manuals and spare parts organised
Create one folder, physical or digital, for the whole television setup: purchase records, manuals for the television, bar and accessory, and a note of which fixings you used and where the spares live. Photograph the completed rear connections and the wall fixings before furniture hides them. This small archive pays for itself the first time you move house, replace the bar, claim under a warranty or try to remember which wall plug you used. Accessories are bought rarely and used for years, which is exactly why their details are forgotten; the folder remembers so that you do not have to.
Further Notes for Confident Buying and Ownership
Reading a listing like an installer, not a shopper
Accessory listings are written to sell, but installers read them for a short list of hard facts: the exact size range supported, the maximum weight, the hole patterns covered, what fixings are included and what the product is made from. Train yourself to find those facts first and to treat lifestyle photographs as decoration. Check whether dimensions refer to the product itself or to the equipment it holds, because confusing the two causes many failed installations. If a listing cannot answer a basic measurement question clearly, treat that as information about the product and favour a pick in this guide whose details you can verify against your own tape measure.
The hidden cost of the cheapest option
Accessories look like a natural place to save money, because they are simple and unglamorous, yet they hold or connect equipment worth far more than themselves. A mount that flexes, a stand that rocks or a cable that fails intermittently costs time, frustration and occasionally real damage, which dwarfs the saving made at purchase. This does not mean buying the most expensive option; it means buying the option whose capacity, materials and details leave a comfortable margin for your equipment. The picks in this guide were chosen with that margin in mind, and your own measurements are what confirm it for your room.
Working safely around televisions and walls
Televisions are awkward rather than heavy: large, fragile screens with their weight in unexpected places. Always move and mount them with two people, keep the screen protected and never rest the panel face-down on anything but a clean, soft, flat surface. Before drilling, check the wall for hidden pipes and cables with a suitable detector and common sense about where services run. Switch off power to the area if you have any doubt. Wear eye protection when drilling masonry and keep children and pets out of the work area. These habits sound obvious written down, yet most installation injuries and breakages happen precisely when they are skipped in a hurry.
Disposal, reuse and passing accessories on
Good mounts, stands and cables often outlive the equipment they were bought for, so treat them as household assets rather than as packaging. When you replace a television or bar, remove accessories carefully, keep their fixings together and store them with their instructions; a future room, a family member or a second setup may need exactly that hardware. If you pass a mount or stand on, include the spare screws and be honest about its age and capacity. Only dispose of hardware that is damaged, bent or missing parts, because an incomplete mount invites the next owner to improvise in ways that end badly.
Frequently Asked Questions
Under or above TV?
Under is common.
Cheapest?
USX multi-brand.
Heavy?
Premium heavy-duty.
Can I mount a soundbar without drilling into the wall?
Some options attach to the back of a television that has mounting holes, so no new wall holes are needed. Others use a shelf or stand instead of a bracket. Check the television's own load guidance and the listing before choosing.
Do I need a stud to hang a soundbar?
Studs give the strongest hold, but other fixings can work depending on the wall type. Hollow plasterboard needs fixings designed for hollow walls, and masonry needs the right plugs. Follow the maker's manual and ask an installer if unsure.
Will a mount fit every soundbar?
Not necessarily. Soundbars differ in size, weight and mounting points, so compare the mount's slot positions and size range with the bar's manual. Listings that claim wide compatibility still need a check against your exact model.
How do I stop the bar from blocking my TV remote?
Leave a small gap below the screen or position the bar slightly lower than the sensor. Many televisions have the sensor near the centre of the lower edge, so check the manual and test the position before drilling.
Can I reuse a mount for a new soundbar later?
Often yes, if the new bar has similar mounting points, weight and depth. Compare these details before reusing, and inspect the mount for wear first.
Should I hide the cables inside the wall?
In-wall cable work can involve electrical safety rules, so use products made for that purpose and follow local regulations. Many people use surface cable covers instead, which are simpler and need no cutting.
What tools do I need for installation?
A drill, bits suited to the wall, a spirit level, a pencil, a screwdriver and possibly a stud finder cover most jobs. The manual should list anything else. A helper makes holding the bar much easier.
How high should a soundbar be mounted?
Mount it directly above or below the TV, centered on the screen, so the sound seems to come from the picture. Below is common when the TV sits low, above when furniture is in the way. Check that the bar does not cover the TV's remote sensor.
Can a soundbar mount hold a subwoofer?
Usually not; most mounts are made for the bar only and the subwoofer is separate. Check the mount's listing and your soundbar's manual before hanging anything extra.
Do soundbar mounts come with screws?
Many include some hardware, but what is supplied varies by product. Check the listing's "what is included" section and confirm the screws and anchors suit your wall.
Will a soundbar mount work on a brick or concrete wall?
It can, but you will need masonry anchors and a suitable drill bit, which may not be in the box. Drywall anchors are not appropriate for these surfaces.
Can I mount a soundbar under a TV that sits on a stand?
Yes, if the mount is designed to attach to the wall below the TV and there is enough clearance above the stand. Measure the gap, the bar's height and its depth before you order.
How do I know if my soundbar has mounting holes?
Look on the back or underside for keyhole slots or threaded inserts, or check the manual. If it has neither, you need a bracket that holds the bar by its body rather than by those points.
Questions to Ask Before You Buy
A wall mount holds expensive audio gear above the floor, so accuracy matters. Answer these questions before you order hardware.
- What type of wall will it attach to: wood studs, metal studs, brick, concrete or hollow plasterboard?
- Where are the studs, and do they line up with the mounting holes you plan to use?
- Does your soundbar have keyhole slots, threaded inserts or a flat back with no mounting points?
- Will the bracket sit clear of the television, shelves and any ventilation openings?
- Where do the power and signal cables enter, and can they reach without strain?
- Does the package include screws and anchors, or must you buy suitable fixings separately?
Compatibility Checks
Look at your soundbar’s manual and the maker’s listing for the mounting hole spacing and any supplied template. Compare those figures with the mount’s slot positions. Wall plugs and screws vary widely, so use fixings that suit your wall material and follow local building rules.
Think about remote control reach. Some soundbars receive signals through the front or top, and a bracket that shields the sensor can cause annoying misses. Check that status lights and the remote window stay visible.
Who Should Skip One
If you rent and cannot drill, if the wall is fragile, or if the audio unit rests happily on a media shelf, a mount may add more effort than value. A stand or shelf can be a gentler alternative.
Matching It to Your Room
Mark positions with a pencil and a spirit level before drilling, and ask a helper to hold the unit while you check alignment. If you are unsure about wiring behind the wall, consult a qualified installer. Follow the maker’s listing, manual and local rules for installation.
Bottom Line
For budget, the USX multi-brand mount. For heavy bars, the premium heavy-duty bracket.
More Soundbar Guides
- Best Soundbars
- Best Dolby Atmos Soundbars
- Best Soundbars Under $100
- Best Soundbars Under $200
- Best Soundbars Under $300
- Best Soundbars Under $500
- Best 5.1 Soundbars
- Best 2.1 Soundbars
- Best Soundbars with Wireless Subwoofer
- Best PC and Desktop Soundbars
- Best Gaming Soundbars
- Best Mini and Small Soundbars
- All soundbar guides
Related Guides
- 6 Best Soundbar Cables: HDMI ARC/eARC and Optical (2026)
- Soundbar Buying Guide: Channels, Atmos, Subwoofer, eARC (2026)
- How to Connect a Soundbar to a TV: HDMI ARC, Optical, Bluetooth
- 6 Best Soundbars for TV: Samsung, Philips, TCL, Polk (2026)
- 7 Best Dolby Atmos Soundbars: TCL, Samsung, Philips, Sonos (2026)




