Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.
Use HDMI ARC or eARC for the best connection; optical is a fallback.
This guide is built from Amazon product listings, not our own testing, so confirm channels, ports, compatibility and current price on each product page.
Last updated: October 31, 2026.

In this guide
Quick Picks
| Product | Type | Best for |
|---|---|---|
| Amazon Basics Toslink Optical Cable | Optical audio cable | Cheap and trusted |
| KabelDirekt Optical Cable (6 ft) | Optical audio cable | TOSLINK 6ft |
| VIOY Optical Cable (15 ft) | Long optical cable | 15 ft TOSLINK |
| Silkland HDMI eARC Cable (3.3 ft) | HDMI eARC cable | Certified HDMI 2.1 |
| 8K HDMI ARC/eARC Cable (6.6 ft) | HDMI eARC cable | 6.6 ft for soundbars |
| Silkland 8K HDMI ARC/eARC Cable (6.6 ft) | HDMI eARC cable | 8K@60Hz for soundbars |
Our Picks

Top pickBest for cheap and trusted
1. Amazon Basics Toslink Optical Cable
An Amazon Basics Toslink digital optical audio fiber optic cable for sound bars and audio systems, per the listing. Check price on Amazon.
Good for: Cheap and trusted. Watch out: optical has limited format support.
Best for tOSLINK 6ft
2. KabelDirekt Optical Cable (6 ft)
A KabelDirekt optical audio TOSLINK cable, 6ft, per the listing. Check price on Amazon.
Good for: TOSLINK 6ft. Watch out: optical has limited format support.

Best for 15 ft TOSLINK
3. VIOY Optical Cable (15 ft)
A VIOY optical audio cable, 15 ft, TOSLINK digital S/PDIF fiber optic cord, per the listing. Check price on Amazon.
Good for: 15 ft TOSLINK. Watch out: optical has limited format support.
Best for certified HDMI 2.1
4. Silkland HDMI eARC Cable (3.3 ft)
A Silkland certified HDMI 2.1 eARC/ARC cable, 3.3FT, ultra high speed 48Gbps, per the listing. Check price on Amazon.
Good for: Certified HDMI 2.1. Watch out: short.
Best for 6.6 ft for soundbars
5. 8K HDMI ARC/eARC Cable (6.6 ft)
An 8K HDMI ARC/eARC cable for soundbars, 6.6ft, ultra high speed HDMI 2.1 48Gbps, per the listing. Check price on Amazon.
Good for: 6.6 ft for soundbars. Watch out: lesser-known brand.
Best for 8K@60Hz for soundbars
6. Silkland 8K HDMI ARC/eARC Cable (6.6 ft)
A Silkland 8K HDMI ARC/eARC cable 2.1 for soundbar, 6.6ft, 8K@60Hz and 4K@120Hz, per the listing. Check price on Amazon.
Good for: 8K@60Hz for soundbars. Watch out: check TV and soundbar ARC port.
Best Picks by Category
These labels come from the price, star rating and number of ratings shown on each Amazon listing. They summarize listing data and are not hands-on test results.
- Top rated: KabelDirekt Optical Cable (6 ft).
- Most reviewed: Amazon Basics Toslink Optical Cable.
- Best value: Amazon Basics Toslink Optical Cable.
- Lowest price: Amazon Basics Toslink Optical Cable.
- Premium option: Silkland 8K HDMI ARC/eARC Cable (6.6 ft).
Price, Rating and Review Comparison
The table sorts the picks by price and adds the star rating and the number of ratings, which shows how much feedback sits behind each average. Prices change often, so confirm the current price on Amazon.
| Product | Price | Rating | Ratings | Price tier |
|---|---|---|---|---|
| Amazon Basics Toslink Optical Cable | Check price on Amazon | See listing | See listing | Mid-range |
| KabelDirekt Optical Cable (6 ft) | Check price on Amazon | See listing | See listing | Mid-range |
| VIOY Optical Cable (15 ft) | Check price on Amazon | See listing | See listing | Mid-range |
| Silkland HDMI eARC Cable (3.3 ft) | Check price on Amazon | See listing | See listing | Mid-range |
| 8K HDMI ARC/eARC Cable (6.6 ft) | Check price on Amazon | See listing | See listing | Mid-range |
| Silkland 8K HDMI ARC/eARC Cable (6.6 ft) | Check price on Amazon | See listing | See listing | Mid-range |
How Much Feedback Backs Each Rating
A high average from a handful of ratings is weaker evidence than a slightly lower average from thousands. Here is how the sample size looks for each pick.
- Amazon Basics Toslink Optical Cable: a large sample of ratings on the listing.
- KabelDirekt Optical Cable (6 ft): a large sample of ratings on the listing.
- VIOY Optical Cable (15 ft): a moderate sample of ratings on the listing.
- Silkland HDMI eARC Cable (3.3 ft): a large sample of ratings on the listing.
- 8K HDMI ARC/eARC Cable (6.6 ft): a small sample of ratings on the listing, so treat its average cautiously.
- Silkland 8K HDMI ARC/eARC Cable (6.6 ft): a large sample of ratings on the listing.
How to Choose
ARC or eARC
Both TV and bar must support it.
Optical limits
Optical does not carry Atmos.
Length
Measure first.
ARC and eARC in Practice
HDMI ARC and eARC both let the television send its audio back to the soundbar over the same HDMI cable that carries other signals. ARC is the older version, and it handles common compressed surround formats well. eARC is the newer version, with more bandwidth, so it can carry richer audio formats and uncompressed multichannel sound. The practical question is whether your television and soundbar both support the version you want.
The port matters as much as the cable. On a television, only one HDMI input, often labeled ARC or eARC, supports audio return. Plug the cable into that input on the TV and into the matching output on the soundbar. If you use the wrong port, you may get a picture but no sound from the bar, or the audio may fall back to the television speakers.
- Look for the ARC or eARC label next to the HDMI port on the television.
- Check the soundbar manual for the port to use when connecting to the TV.
- Check that the cable is described as supporting ARC or eARC, and confirm that the listing names a high-speed or ultra-high-speed standard.
Also think about your other devices. If a game console or streaming box connects to the television, the television passes audio from that device to the soundbar through the return channel. That is one reason a single cable to the soundbar keeps the setup tidy. Check the television menu to select the soundbar as the audio output, since this setting is often not automatic.
When Optical Is the Right Choice
An optical digital cable, often called TOSLINK, carries audio as light through a small plug on each end. It is a common fallback for older televisions and soundbars that lack ARC. It works well for stereo and for common compressed surround formats, but it has a lower bandwidth ceiling than HDMI, so it cannot carry some newer audio formats. This post already notes that optical does not carry Atmos.
Optical has a few practical advantages. The connection is electrically isolated, so it does not pick up hum from the cable. The plugs are small and fit in tight spaces, and the cables come in long lengths. If your television has no ARC port, or if the ARC port is already in use, optical is a simple and dependable option.
- Remove the small protective caps from both plugs before connecting.
- Push each plug in until it seats fully, since a half-seated plug causes dropouts.
- Avoid sharp bends or kinks, which can damage the fiber inside the cable.
- Set the television audio output to digital or optical in its menu.
Volume control is another point. Optical does not pass remote commands the way some HDMI connections can, so you may need to use the soundbar remote or program the television remote. Check your manuals for how volume is controlled with each connection.
Fixing No Sound, Dropouts and Lip-Sync Problems
Most sound problems after a new cable trace back to settings, not the cable. Start with the basics. Confirm the cable is in the correct port at both ends, and that the soundbar input is set to match. Then open the television audio menu and make sure the output is set to the external speaker or soundbar, and not to the internal speakers.
If you use HDMI, look for a setting called device control, CEC or a brand-specific name. This lets the television and soundbar talk to each other for power and volume. Turn it on if you want one remote to control both, and turn it off if it causes odd behavior such as the bar switching on unexpectedly. Sometimes a full power cycle helps, with both devices unplugged for a short time and then restarted.
- If you hear no sound, try another HDMI input or a different cable to rule out a fault.
- If the audio format will not switch, check whether the television is set to pass through or to convert to stereo.
- If voices lag behind lips, look for an audio delay or lip-sync setting on the television or soundbar.
- If sound cuts out, re-seat the plugs and check for a damaged cable.
Firmware can also play a part. Check the maker’s support page for updates to the television and soundbar, since updates sometimes fix handshake problems between devices.
Routing, Length and Installation Tips
Measure the real route the cable will take, not the straight distance. Add the vertical run behind the television, any detour around furniture and a little slack at each end. Cables that are too short strain the ports, while very long ones add clutter. The listings in this guide include short and long lengths, so pick the one that fits your route with a bit to spare.
Take care with bends, especially for optical cables, which can be damaged by sharp kinks. For HDMI, avoid pulling the cable tight against the port, and use cable clips or ties to take the weight. If the television is wall mounted, leave enough slack for any tilt or swivel.
- Do not run cables where they can be pinched by doors, drawers or furniture feet.
- Keep audio cables away from power cords where practical.
- Follow local building rules and the maker’s instructions if you run cables inside walls.
- Use cable sleeves or adhesive clips to keep the back panel tidy.
Replace a cable if the plug is loose, the connector is bent, the jacket is cracked or sound drops out when you touch it. Keep the old cable as a spare for troubleshooting until the new one is working.
Which Port Does Your Soundbar Actually Use
The right cable depends on the ports on both devices, not on a label like “premium.” Take a minute to look at the back of your TV and soundbar and match the connections. Always confirm details in both manuals, because port names and features differ between models.
- HDMI ARC: carries audio back from the TV to the soundbar over one HDMI cable. The TV port is normally marked ARC.
- HDMI eARC: an upgraded return channel built for higher-bandwidth audio. Both the TV and the soundbar need to support it, and the port is marked eARC on supporting TVs.
- Optical (TOSLINK): a square-ended fiber cable that carries digital audio. It is widely supported but offers less bandwidth than eARC, so some surround formats may not pass through it.
- 3.5 mm or RCA analog: older connections that are still handy for simple setups.
- USB or Bluetooth: sometimes offered for music, but not a replacement for a TV connection.
If a soundbar lists only optical, an HDMI cable will not help. If it lists an ARC or eARC port, HDMI is typically the more flexible choice because one cable can carry audio and control signals, which lets your TV remote adjust volume.
Cable Length, Certification and Fit Notes
Plenty of shoppers pick a cable once and never think about it again, which is fine, so long as the basics are right. A few details help avoid frustration.
Pick the right length
Measure the route from the TV to the soundbar along the actual path, including wall corners and cable channels. Add a bit of slack so you do not strain the connectors. Very long runs may need a cable labeled for it, so read the specs.
Check the version and certification
For eARC, look for a cable the maker states as high speed or ultra high speed, and for certification wording on the packaging. Marketing terms differ, so rely on the official standard names listed on the page and not on color or plating claims.
Mind the connector shape
Wall-mounted TVs leave little room behind the set. Right-angle or slim connectors can help. Optical cables also should not be bent sharply, since the fiber inside can be damaged.
Settings after you plug in
Connecting the cable is only half the job. Open the TV sound menu, choose the soundbar output, and enable any HDMI control feature described in the manuals. If you hear nothing, try another port, check the audio format setting, and power cycle both devices before you assume the cable is faulty.
Tidy installation
Use cable clips or a raceway to keep runs neat. Keep audio cables away from power cords if you hear hum, and never force a connector that does not seat smoothly.
The Six Cables in This Guide and the Jobs They Suit Best
Cables look interchangeable in photographs, yet length, connector shape and the connection standard they support decide whether a soundbar setup works first time or becomes an evening of fault-finding. The notes below stay with the picks already reviewed above and look at which installation each cable genuinely suits, where each one falls short and how to avoid the small buying mistakes that cause most returns in this category.
The optical picks for straightforward television sound
The Amazon Basics and KabelDirekt optical cables suit the large number of setups where the television and bar both offer an optical connection and the owner simply wants reliable stereo and standard surround sound without menu complications. They are forgiving to install, immune to the handshake quirks that occasionally trouble HDMI connections, and ideal for older televisions. Their shared limitation is the optical format itself, which cannot carry the highest-bandwidth formats discussed in this guide, so they are the wrong choice if your bar and television are both ready for the newer standard and your content uses it. The longer VIOY pick extends the same idea to rooms where the equipment sits further apart, with the routing cautions covered below.
The HDMI picks for ARC and eARC setups
The Silkland and the other HDMI picks in this list are for owners who want the television remote to control the bar and the widest format support their equipment allows. Shorter cables suit the common case where the bar sits directly below the television and the ports are close together, keeping the installation tidy and the connection reliable. A mid-length cable gives freedom to route neatly around a stand or through a channel without leaving coils of spare cable behind the television. Whichever length you choose, connector shape matters more than most buyers expect: chunky plugs and stiff cable ends can foul a recessed port or force an uncomfortable bend, so look at the rear of your own equipment before ordering.
Choosing Length and Routing Without Waste or Strain
Measure the actual path the cable will travel, not the straight-line distance between the two boxes. A cable that runs from the rear of a television, down behind a stand, across to a bar and up into its port travels much further than the gap between the products suggests. Add a little slack so the cable is never under tension and can be unplugged without dragging the equipment, but avoid large excess that has to be coiled tightly behind the television, because tight coils strain connectors and make fault-finding harder. Keep signal cables away from tight bundles of power cables where you can, support long runs so their weight does not hang from the port, and never trap a cable under a stand foot or behind a wall bracket.
Settings to Confirm After the Cable Goes In
A new cable only completes half the job. On the television, confirm that the correct socket is in use, that the audio output is directed to the external device rather than to the television speakers, and that any control feature that lets one remote run both products is switched on for HDMI connections. On the bar, confirm the matching input is selected and that it has not defaulted to a wireless connection after being unplugged. Test with ordinary television first, then with the app or player you use most, because different sources expose different format settings. If sound arrives but control does not, or control works but sound does not, the fault is almost always a setting or a socket rather than the cable itself, so work through the troubleshooting section of this guide in order.
When Replacing the Cable Is and Is Not the Answer
Replace a cable when you can see damage, when a connection feels loose in its port, when sound drops as the cable moves, or when you are moving to a connection standard your old cable cannot support. Do not replace a cable in the hope of better sound quality from the same connection on the same equipment, because a working cable already delivers the signal correctly and money is better kept for placement or equipment changes that you can actually hear. Keep the old, known-good cable in a drawer after any upgrade. It becomes your best diagnostic tool: swapping it back in for two minutes can prove whether a new fault lies in the cable, the bar or the television.
More Practical Guidance Before You Decide
Measure twice, because accessories punish guesswork
With mounts, cables and stands, nearly every disappointment comes from a measurement that was assumed rather than taken. Measure the television, the soundbar and the furniture as a set: the width of the bar against the width of the stand, the depth of the shelf against the depth of the bar feet, and the distance from the wall to the viewing seat against the cable length you plan to run. Write the numbers down and compare them with the listing details for the exact pick you are considering. Five minutes with a tape measure prevents the most common returns in this category, which are almost never about sound quality and almost always about fit.
Plan the cable path before anything goes on the wall
Decide where power and signal cables will run before you drill, assemble or push furniture back into place. Cables should reach their ports with a little slack, without sharp bends, without being trapped under a stand foot or behind a bracket, and without crossing walkways where they will be tugged. If you plan to hide cables, check what your wall construction allows and keep access to at least one end of each run so a faulty cable can be swapped later. A tidy installation that cannot be serviced becomes a problem the first time a connection needs attention, so neat and reachable beats invisible and sealed.
Safety checks that matter more than appearance
Anything that holds a television or a soundbar above floor level deserves a calm safety check once it is installed. Confirm that fixings are in solid material or in the correct anchors for your wall type, that brackets are level and fully tightened, and that the combined weight sits comfortably within the stated capacity of the mount or stand with headroom to spare. Tug gently, watch for flex, and re-check after the first week as fixings settle. Keep the setup out of reach of climbing children, route cables so they cannot pull the bar forward, and never balance a soundbar on a mount or shelf that was designed for something lighter.
A calm installation order that avoids most mistakes
Work in a fixed order: unpack and lay out every part, read the instructions for your specific pick all the way through once, prepare the wall or furniture, fit the hardware loosely, offer the equipment up and check levels and clearances, and only then tighten everything fully. Keep the original fixings and any spare screws together in a labelled bag, because the same mount or stand often needs different screws for a future television or bar. Photograph the rear connections before you push anything against the wall. That single habit saves a surprising amount of guesswork when you later add a streamer, a console or a replacement cable.
Care, checks and small adjustments over time
Installations loosen and rooms change. Every few months, check that bracket screws are still snug, that a stand still sits level on its feet or castors, and that cables have not worked loose or become pinched as furniture has moved. Dust around ports and vents with a soft brush, and re-level a bar that has been knocked during cleaning. If you move house or replace the television, treat the accessory as a new installation rather than assuming the old measurements still hold. The picks in this guide are simple products, and their long, trouble-free service mostly depends on these small, unglamorous checks.
Matching the accessory to the equipment you will own next
Televisions and soundbars change more often than the furniture and brackets around them, so a little headroom is valuable. A mount with a generous weight capacity and a wide range of hole patterns, a stand with adjustable height, or a cable with a little extra length and the newer connection standard will often serve the next piece of equipment as well as the current one. That said, do not buy oversized hardware for a compact setup you know will stay compact, because bulkier accessories can look clumsy and cost more to install. Balance future flexibility against the room and equipment in front of you today.
Real-World Scenarios and Long-Term Ownership
Scenario: a rented home where drilling is limited
Renters need installations that can be undone cleanly. Favour the picks and methods in this guide that attach to the television itself, sit on existing furniture or use fixings that leave minimal marks, and keep every original part so the equipment can be restored when you move. Photograph the wall and the setup before you start, agree any permanent fixing with the landlord in writing where your tenancy requires it, and keep cables surface-run and tidy rather than buried. A slightly less invisible installation that leaves your deposit intact is the correct engineering choice for a rented room, however tempting a fully hidden result looks in photographs.
Scenario: a family room that gets rearranged often
Some rooms change with the seasons, with guests and with children growing up. Accessories earn their keep in such rooms when they tolerate change: stands that roll or swivel without drama, mounts that accept a different bar later, and cables long enough to survive a new layout. When you compare the picks, ask how each one behaves on the day the sofa moves to the other wall. Hardware that only works in one exact arrangement becomes an obstacle, while adaptable hardware quietly supports the room for years. That adaptability is a genuine feature, even though it never appears in a specification list.
Checking compatibility when brands differ
Mixed-brand setups are normal: a television from one maker, a bar from another and an accessory from a third. Compatibility then depends on physical standards rather than on badges. For mounts and stands, the shared language is measurements, hole patterns and weight, so compare those numbers directly instead of searching for your bar model in a compatibility list that may simply be out of date. For cables, the shared language is the connection standard and the version both devices support. When the numbers and standards agree, mixed brands work together happily; when they do not, no badge on the box can rescue the combination.
Tools and preparation that make installation day calm
Gather the tools before you begin: a tape measure, a pencil, a level, the correct screwdrivers or driver bits, a drill with suitable bits for your wall, and a container for screws so nothing migrates into the carpet. Check you have the fixings your wall actually needs, which may differ from those in the box. Clear the floor, protect the screen and the bar with a soft blanket, and keep a second pair of hands available for any moment when equipment must be held while fixings are tightened. Installations go wrong through rushing and improvisation far more often than through difficult hardware, and preparation is the cheapest fix of all.
What to do when something does not fit
Stop, put the equipment down safely and re-measure before reaching for force or for a drill. A bracket that almost lines up, a cable that almost reaches and a stand that almost balances are all telling you the same thing: one of your assumptions about size, pattern or weight is wrong. Recheck the manual for your exact pick, because many mounts and stands include alternative arms, spacers or screw sets that solve the problem legitimately. If the combination genuinely cannot work, a returned accessory is a minor inconvenience, while a damaged television, bar or wall is a major one. Patient installers finish faster than forceful ones.
Keeping receipts, manuals and spare parts organised
Create one folder, physical or digital, for the whole television setup: purchase records, manuals for the television, bar and accessory, and a note of which fixings you used and where the spares live. Photograph the completed rear connections and the wall fixings before furniture hides them. This small archive pays for itself the first time you move house, replace the bar, claim under a warranty or try to remember which wall plug you used. Accessories are bought rarely and used for years, which is exactly why their details are forgotten; the folder remembers so that you do not have to.
Further Notes for Confident Buying and Ownership
Reading a listing like an installer, not a shopper
Accessory listings are written to sell, but installers read them for a short list of hard facts: the exact size range supported, the maximum weight, the hole patterns covered, what fixings are included and what the product is made from. Train yourself to find those facts first and to treat lifestyle photographs as decoration. Check whether dimensions refer to the product itself or to the equipment it holds, because confusing the two causes many failed installations. If a listing cannot answer a basic measurement question clearly, treat that as information about the product and favour a pick in this guide whose details you can verify against your own tape measure.
The hidden cost of the cheapest option
Accessories look like a natural place to save money, because they are simple and unglamorous, yet they hold or connect equipment worth far more than themselves. A mount that flexes, a stand that rocks or a cable that fails intermittently costs time, frustration and occasionally real damage, which dwarfs the saving made at purchase. This does not mean buying the most expensive option; it means buying the option whose capacity, materials and details leave a comfortable margin for your equipment. The picks in this guide were chosen with that margin in mind, and your own measurements are what confirm it for your room.
Working safely around televisions and walls
Televisions are awkward rather than heavy: large, fragile screens with their weight in unexpected places. Always move and mount them with two people, keep the screen protected and never rest the panel face-down on anything but a clean, soft, flat surface. Before drilling, check the wall for hidden pipes and cables with a suitable detector and common sense about where services run. Switch off power to the area if you have any doubt. Wear eye protection when drilling masonry and keep children and pets out of the work area. These habits sound obvious written down, yet most installation injuries and breakages happen precisely when they are skipped in a hurry.
Disposal, reuse and passing accessories on
Good mounts, stands and cables often outlive the equipment they were bought for, so treat them as household assets rather than as packaging. When you replace a television or bar, remove accessories carefully, keep their fixings together and store them with their instructions; a future room, a family member or a second setup may need exactly that hardware. If you pass a mount or stand on, include the spare screws and be honest about its age and capacity. Only dispose of hardware that is damaged, bent or missing parts, because an incomplete mount invites the next owner to improvise in ways that end badly.
Documenting your installation for the next person
Whether the next person is a future you, a partner or a new owner of the house, a short record of the installation is a gift. Note where the fixings went into the wall, which anchors you used, how the cables run and which settings you changed on the television. Keep that note with the manuals. Houses accumulate invisible decisions, and television setups are full of them: a cable buried in a channel, a bracket fixed into a single stud, a menu setting changed years ago. The household that writes these things down troubleshoots in minutes; the household that does not starts from zero every time.
Ownership Notes Specific to This Setup
Storing spare cables so they stay reliable
A spare cable is only useful if it still works on the day you reach for it. Store optical and HDMI cables loosely coiled in a drawer or a labelled box, never tightly wound, kinked or trapped under heavy objects, because sharp bends are the enemy of both types and optical fibres in particular can be damaged invisibly by crushing. Keep the protective caps on optical connectors whenever the cable is unplugged, since a scratched or dusty tip is a common cause of a cable that seems to have failed for no reason. If you keep one known-good spare of each type your setup uses, fault-finding in the future becomes a two-minute swap test instead of a shopping trip taken in frustration.
Labelling and documenting a finished cable setup
Once a setup works, spend two minutes protecting that success. Put a small label at each end of every cable naming what it connects, because behind a television all black cables look identical and memory fades within months. Photograph the rear of the television and the bar showing every connection clearly, and keep that photograph with the product manuals. When a connection is disturbed during cleaning, when a new device is added or when a helpful relative reconnects things differently, the photograph restores the working arrangement immediately. Installers who work in other people’s homes do this as a matter of routine, and home setups benefit from exactly the same habit.
Cables in homes with children, pets and robot vacuums
Loose cables attract small hands, chewing pets and the brushes of robot vacuums, and a tugged cable can pull a lightweight soundbar forward or damage a port that is far more expensive than the cable itself. Route cables behind furniture wherever possible, use simple channels or clips along skirting where runs are exposed, and leave no inviting loops at floor level. Check floor-level connections occasionally, because a plug worked half out of its socket produces exactly the intermittent sound faults that are hardest to diagnose. A tidy cable path is therefore not just about appearance in a busy household; it is basic protection for the equipment at both ends of the run.
Planning cables when you wall mount or rearrange
Any change to the room should start with the cable plan, because cable length and port positions quietly dictate where equipment can actually go. Before moving a television to a wall or swapping a stand for a mount, lay the existing cables out along the new route and confirm they reach with slack to spare at both ends. If they do not, order the replacement length before installation day rather than discovering the shortfall with the television already on the wall. Keep the old cables afterwards as spares, since a setup that has worked reliably has already proven them, and proven cables are the most valuable diagnostic tools a household can own.
Frequently Asked Questions
HDMI or optical?
HDMI ARC/eARC when possible.
Cheapest?
Amazon Basics Toslink.
Long?
VIOY 15 ft.
Can I use any HDMI cable for ARC?
Many HDMI cables work, but check that the listing names support for ARC or eARC and a suitable speed standard. The port you connect to matters more than the cable alone. Use the ARC or eARC labeled input on the TV.
Do I need a special cable for eARC?
eARC generally calls for a high-speed or ultra-high-speed HDMI cable. Check the listing to see what standard it names. Both the TV and soundbar must also support eARC.
Why is there no sound after I connect the soundbar?
Check the ports, the input on the soundbar and the TV audio output setting. Make sure the cable is in the ARC or eARC port. A different cable or port can help rule out a fault.
Does optical sound worse than HDMI?
For stereo and common surround formats it can sound the same. The difference is that optical cannot carry some newer high-bandwidth formats. If your content uses those, HDMI eARC is the better route.
Can I use both optical and HDMI at once?
You can connect both, but the soundbar typically plays one input at a time. Select the input you want on the soundbar. Using one connection avoids confusion.
Does a longer cable reduce sound quality?
For optical and HDMI, sound quality is generally fine within the lengths sold for home use. Very long runs can cause issues with some HDMI setups, so check the listing and the maker's guidance.
How do I control the volume with an optical connection?
The soundbar remote usually handles volume directly. Some televisions can be set up to send volume commands through an IR learning feature. Check your manuals.
Should I turn on CEC?
Turn it on if you want a single remote for both devices. Turn it off if it causes the bar to power on or switch input unexpectedly. The setting name varies by brand.
Compatibility Checks
A cable can only do what the ports at both ends allow. Before ordering anything, look at the back of your television and your soundbar and write down what each one offers.
- Find the port labels on both devices, since similar-looking sockets can behave differently.
- Check your television manual to see which HDMI input supports audio return.
- Confirm whether your soundbar expects an HDMI or a digital optical connection.
- Look at the menu settings, because audio output often needs to be switched manually.
- Note whether anything else, such as a game console, shares the same inputs.
Questions to Ask Before You Buy
Once the ports match, a few practical questions help you avoid a return.
- How far apart will the two devices sit, and does the route include bends?
- Will the cable run behind furniture or through a wall channel?
- Are the connector heads slim enough for a crowded back panel?
- Do I want a flat, braided or standard jacket style?
- Does the listing name the standard it supports?
It also helps to leave a little slack. A cable pulled tight can strain the sockets on both devices, particularly if the television is wall mounted and tilts or swivels. A gentle curve behind the set is far kinder to the connectors than a sharp bend. Label each end with a small tag so you remember which input it uses when you rearrange the cabinet later.
Who Should Skip It
If your soundbar already came with a working cable that suits your setup, a new one will rarely change what you hear. Sound problems often trace back to settings, not wires, so check the menus first. Follow the maker’s listing, manual and local rules when running cables through walls or ceilings.
Bottom Line
For eARC, the Silkland HDMI cables. For optical, the Amazon Basics Toslink.
More Soundbar Guides
- Best Soundbars
- Best Dolby Atmos Soundbars
- Best Soundbars Under $100
- Best Soundbars Under $200
- Best Soundbars Under $300
- Best Soundbars Under $500
- Best 5.1 Soundbars
- Best 2.1 Soundbars
- Best Soundbars with Wireless Subwoofer
- Best PC and Desktop Soundbars
- Best Gaming Soundbars
- Best Mini and Small Soundbars
- All soundbar guides
Related Guides
- 6 Best Soundbar Wall Mounts and Brackets: Under $30 (2026)
- Soundbar Buying Guide: Channels, Atmos, Subwoofer, eARC (2026)
- How to Connect a Soundbar to a TV: HDMI ARC, Optical, Bluetooth
- 6 Best Soundbars for TV: Samsung, Philips, TCL, Polk (2026)
- 7 Best Dolby Atmos Soundbars: TCL, Samsung, Philips, Sonos (2026)



