Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.
A wash and cure station cleans and hardens resin prints. Check that it fits your build plate.
This guide is built from Amazon product listings, not our own testing, so confirm specs, compatibility and current price on each product page.
Prices are approximate US dollar conversions of what Amazon showed on October 31, 2026.
Last updated: October 31, 2026.
Quick Picks
| Product | Type | Best for |
|---|---|---|
| ELEGOO Mercury Plus 2.0 | Wash and cure station | Lowest-cost station |
| Creality Wash and Cure UW-01 | 2-in-1 wash and cure | Creality 2-in-1 |
| Creality Wash and Cure UW-03 | 2-in-1 wash and cure | Newer Creality model |
| ELEGOO Mercury XS Bundle | Wash and cure bundle | With handheld UV light |
| UNIFORMATION Curing Machine (10.3-inch) | UV curing station | 360-degree turntable |
| Phrozen Wash and Cure Kit | Wash and cure kit | Fits up to 10.3-inch plates |
Our Picks
1. ELEGOO Mercury Plus 2.0
An ELEGOO Mercury Plus 2.0 wash and cure station, per the listing. It was shown at about $99 on Amazon.com on October 31, 2026.
Good for: Lowest-cost station. Watch out: check build plate size.
Who it suits: The listing describes an ELEGOO Mercury Plus 2.0 wash and cure station, and it was the lowest-priced of the six shown. It suits someone moving from hand-washing in a tub and curing in sunlight to a dedicated station, without spending much on the first upgrade.
Trade-offs: The listing details we have do not state the wash volume, the UV power or the maximum build plate size, which is why our note says to check build plate size. A lower price may also mean fewer extras than the bundles higher in this list, so compare what is actually included.
Check before buying: Measure your printer’s build plate and any parts you print, and compare them with the station’s stated capacity on the Amazon page. Check whether a wash basket, tank cover and any adapters are included, and whether you need to buy isopropyl alcohol and a separate container.
2. Creality Wash and Cure UW-01
A Creality UW-01 2-in-1 wash and cure station, per the listing. It was shown at about $129 on Amazon.com on October 31, 2026.
Good for: Creality 2-in-1. Watch out: check build plate size.
Who it suits: The listing describes a Creality UW-01 as a 2-in-1 wash and cure station. A single unit that both washes and cures saves bench space and suits people with one resin printer, particularly in a small room or apartment.
Trade-offs: At about $129 it costs more than the ELEGOO Mercury Plus 2.0 shown here, and a combined unit usually does one job at a time. If you print often, you may wait for a wash cycle to finish before you can start curing. The listing summary we have does not give plate size or timer details.
Check before buying: Check build plate size, since our note flags it, and check whether the station fits the printer brand and size you own. Look at how the lid or hood is sealed and how easy the tank is to empty and clean, because these affect everyday use.
3. Creality Wash and Cure UW-03
A Creality UW-03 2-in-1 wash and cure station, per the listing. It was shown at about $159 on Amazon.com on October 31, 2026.
Good for: Newer Creality model. Watch out: higher price.
Who it suits: The listing describes the Creality UW-03 as a 2-in-1 wash and cure station, and our shorthand calls it the newer Creality model. It suits buyers who like the 2-in-1 approach and want the more recent of Creality’s two units shown here.
Trade-offs: It is priced higher, at about $159. We cannot say from the listing details what, if anything, the UW-03 adds over the UW-01 beyond being the newer model, so do not assume extra capacity or features without reading the specifications on the Amazon page.
Check before buying: Compare the UW-01 and UW-03 listings side by side for plate size, wash volume, timers, UV light details and what is in the box. If the older unit meets your needs, the price difference may be better spent on alcohol, gloves and filters.
4. ELEGOO Mercury XS Bundle
An ELEGOO Mercury XS bundle wash and cure station with a handheld UV light, per the listing. It was shown at about $180 on Amazon.com on October 31, 2026.
Good for: With handheld UV light. Watch out: higher price.
Who it suits: The listing describes an ELEGOO Mercury XS bundle wash and cure station that comes with a handheld UV light. The handheld light is useful for spot-curing parts that are awkward to place on a turntable, or for finishing small pieces.
Trade-offs: At about $180 it is priced higher, and the bundle is aimed at people who value the extra light. A handheld UV light needs UV-rated eye protection, and the bundle contents may differ from the Mercury Plus 2.0, so check which parts you are actually paying for.
Check before buying: Read the listing for the station’s capacity and for how the handheld light is powered. Confirm the build plate or part sizes you print will fit, and check what safety guidance comes with the light. Never look at UV light directly or point it at other people.
5. UNIFORMATION Curing Machine (10.3-inch)
A UNIFORMATION UV resin curing station, 10.3-inch, with a 360-degree turntable, per the listing. It was shown at about $200 on Amazon.com on October 31, 2026.
Good for: 360-degree turntable. Watch out: curing only.
Who it suits: The listing describes a UNIFORMATION UV resin curing station, 10.3-inch, with a 360-degree turntable. It suits people who already wash prints another way, or who want a separate curing machine so one print can cure while another is washed.
Trade-offs: Our note is curing only. It does not wash, so you still need a wash container, alcohol or a water-washable approach and a plan for drying. At about $200 it is not cheap for a single-function machine compared with the 2-in-1 units shown.
Check before buying: Check the 10.3-inch size against your largest print, and the power and timer details on the Amazon page. Look at how the lid blocks UV light, because ultraviolet exposure to eyes and skin is a concern, and consider where the unit will sit so prints can be handled safely.
6. Phrozen Wash and Cure Kit
A Phrozen Wash and Cure Kit that fits build plates up to 10.3 inches, per the listing. It was shown at about $250 on Amazon.com on October 31, 2026.
Good for: Fits up to 10.3-inch plates. Watch out: high price.
Who it suits: The listing describes a Phrozen Wash and Cure Kit that fits build plates up to 10.3 inches. It is the most expensive of the six at about $250, and the size note suggests it targets owners of larger-format resin printers.
Trade-offs: The high price is our main caution. A larger station takes more bench space and uses more alcohol or washing liquid per fill. The summary we have does not tell us whether it is a single 2-in-1 unit or two parts, so read the listing closely.
Check before buying: Confirm your build plate is within the 10.3-inch limit and check the plate’s mounting style. Look at what the kit includes, such as baskets and covers, and weigh the cost against a cheaper 2-in-1 station if your prints are small.
How We Chose
This guide is built from Amazon product listings, not our own testing. We did not use, run or measure any of these stations. We relied on what each listing says about the type of station (wash and cure, curing only, or a kit), any stated plate size, what comes in the bundle, and the price Amazon showed on October 31, 2026.
We then grouped the six units by price and by function, and wrote down what the listing leaves out. Prices and listing text change often, and sellers can edit pages, so treat this as a starting point. Read the current Amazon page and the manufacturer’s safety information before you buy.
How to Choose
A wash and cure station is a convenience and a safety aid, not a requirement for resin printing. The right one depends on your plate size, bench space and how often you print.
Build plate size
Match your printer. Check the largest build plate or part you plan to wash or cure and compare it with the station’s stated capacity. Two of the listings here mention 10.3 inches, and the others do not state a size in the details we have, so confirm it on the product page.
Wash and cure
Some units only cure. A 2-in-1 station washes and cures in one housing, which saves space but means one stage at a time. Separate wash and cure units cost more together but let you work on two batches. A curing-only machine needs a separate wash method.
Wash tank and liquids
Many resins are washed in isopropyl alcohol, while some are marketed as water-washable. Check which your resin uses, and whether the station’s tank material is compatible with it. Isopropyl alcohol is flammable, so keep it away from heat and open flames and store it in a closed container.
UV light and curing
Resin is cured with ultraviolet light, often around 405nm for consumer printers. Check that the station’s light range suits your resin. A turntable helps expose all sides evenly. Repeated overexposure can make some parts brittle or discolored, so follow the resin maker’s cure time guidance.
Safety
Use gloves and ventilation. Uncured resin and washing liquid can irritate skin and eyes, so wear nitrile gloves and eye protection when you handle parts or empty the tank. Stations should have a lid that blocks UV light; do not defeat any interlock or look into the lit chamber. Follow the manufacturer’s safety data sheet for resin and cleaner.
Noise, footprint and power
Washing with a spinning agitator makes noise, and curing units can get warm. Measure your bench and check that the lid can open fully. Keep the station on a stable, non-flammable surface and away from curtains and paper, and do not leave it running unattended for long periods.
Running costs
Budget for alcohol or cleaner, gloves, paper towels, filters and a waste container. A cheaper station can still save money over time if it keeps cleaning consistent and cuts wasted prints.
Tips, Maintenance and Storage
Wash for the time the resin maker suggests, then dry the print before curing. Parts that go into the curing chamber while still wet with alcohol can cure with a cloudy or sticky surface. Remove supports after curing only if the resin guidance says so; some are easier to snip before.
Keep the wash liquid in a closed container when it is not in use. Over time it picks up resin and becomes less effective; many people let used liquid settle, pour off the clear part, and treat the sludge as resin waste. Do not pour used liquid or resin down the drain, and check your local rules for disposal.
Wipe the tank and lid after each session, clean spills straight away and check the basket or plate holder for cured resin buildup. Look at the UV light cover for scratches and dirt, which can reduce exposure. Unplug the unit before cleaning, and never submerge the electronics.
Store the station in a dry place with the lid closed to keep out dust. Keep alcohol, resin and cleaning supplies together in a labelled, sealed storage box away from heat and out of reach of children and pets.
Frequently Asked Questions
Do I need a wash and cure station?
Not strictly. Many people wash in a covered container of isopropyl alcohol and cure in sunlight or with a UV lamp. A station makes the process more consistent, keeps splashes contained and can save time if you print often. It is a convenience, not a substitute for gloves, ventilation and the resin maker’s instructions.
Which listed station is the cheapest?
Based on the prices Amazon showed on October 31, 2026, the ELEGOO Mercury Plus 2.0 was the lowest at about $99. The Phrozen Wash and Cure Kit was highest at about $250. Prices move often, so check the current Amazon listing, and compare what each package actually includes before choosing on price alone.
What is the difference between a 2-in-1 station and separate units?
A 2-in-1 station washes and cures in one housing, which saves bench space but handles one stage at a time. Separate wash and cure units take more room and usually cost more together, but let you cure one batch while washing another. A curing-only machine, like the UNIFORMATION listing, needs a separate wash method.
How do I know if a station will fit my printer?
Measure the build plate and the tallest part you print, then compare them with the station’s stated capacity on the Amazon page. Two listings here mention 10.3 inches. If the listing does not give a size, check the manufacturer’s page or ask the seller before you buy, and check how the plate attaches inside.
Is isopropyl alcohol safe to use for washing?
It needs care. Isopropyl alcohol is flammable and can irritate skin and eyes, so keep it away from heat, sparks and open flames, work in a ventilated area and wear gloves. Store it in a closed container. Some resins are water-washable instead; follow the resin maker’s cleaning guidance and the safety data sheet.
How should I dispose of used washing liquid?
Do not pour it down the drain. Dirty alcohol contains dissolved resin. A common general approach is to let solids settle, cure the sludge with UV light, and then dispose of it according to local rules. Rules vary by area, so check your local waste guidance and the safety data sheet for the products you use.
Is the UV light in a curing station dangerous?
Ultraviolet light can harm eyes and skin, so avoid looking at it or exposing skin. Use stations with the lid closed, never bypass any safety switch, and wear UV-rated eye protection with a handheld lamp. Follow the manufacturer’s instructions. If a unit cuts out or flickers, stop using it and contact the seller.
Bottom Line
For value, the ELEGOO Mercury Plus 2.0. For a larger plate, the Phrozen kit.
If you want one machine for both jobs, compare the two Creality 2-in-1 units. If you already wash your prints and only need curing, the UNIFORMATION station is a curing-only option, and the ELEGOO Mercury XS bundle adds a handheld UV light. Whatever you choose, confirm the plate size on the Amazon page, keep gloves and ventilation in your routine, and read the safety data sheet. This guide reflects listings, not our own testing.
More 3D Printing Guides
- Best 3D Printers
- Best 3D Printers for Beginners
- Best 3D Printers Under $300
- Best 3D Printers Under $500
- Best 3D Printers Under $1000
- Best Resin 3D Printers
- Best Enclosed 3D Printers
- Best CoreXY 3D Printers
- Best Large-Format 3D Printers
- Best Multi-Color 3D Printers
- All 3D printer guides