Label every package with its destination room, a short contents note and any handling mark, and put the label on at least two sides. When boxes arrive, anyone can carry them to the right place without asking you. This guide covers the key, the label content, placement, a worked plan for the day and the common ways a labelling scheme goes wrong.

Build Your Labeling Key
Before you tape a single box, write a key. Give each room a short name or color, and decide on a few handling marks such as “fragile” or “this side up”. Keep the key on one page and share it with anyone helping.
- Use plain room names that match the new place, not the old one.
- Number boxes within each room so you can tell if one is missing.
- Reserve a code for “open first” boxes with daily essentials.
In this guide
What Goes on Each Label
| Item | Example idea |
|---|---|
| Destination room | Kitchen, Office, Garage |
| Box number | Kitchen 3 of 8 |
| Contents note | Plates and bowls |
| Handling mark | Fragile or heavy |
Labeling Steps
- Pack and close the box fully before labeling it.
- Attach one label on the side and one on the top, so it is visible when stacked.
- Write or print in large, dark letters that can be read from a few steps away.
- Add the box to your inventory list with its number and contents.
- Put the box in a holding area grouped by destination room.
Tips for Readability
Use labels large enough to be read at a distance. A printed label is often easier to read than handwriting, and it can include a barcode if you track boxes by scanner. Press down all edges so the label does not peel off during handling. If a box is reused, remove or cover older marks to avoid confusion.
A Worked Walkthrough: Packing a Three-Bedroom Home
The counts below are an invented example, to show how the numbering works.
- List the rooms in the new place: kitchen, living room, three bedrooms, bathroom, office and garage. Give each a short name, and decide on a color if you use color coding.
- Pack one room at a time. Finish and close each box before you begin the next, so contents are not mixed.
- When a box is closed, give it a number in that room’s sequence. In this example the kitchen ends up with 12 boxes, so the last is marked Kitchen 12 of 12.
- Write the label with the room, the number and a two or three word contents note, and add a handling mark if needed.
- Stick one label on a long side and one on the top, and add the box to the list.
- Check the list when each room is done: the count on the list should match the boxes in the stack.
- Keep boxes grouped by room in the holding area, with the “open first” boxes nearest the door.
Pack heavy items in small boxes and light items in larger ones, and avoid filling any box to a weight that one person cannot lift comfortably.
On Moving Day
Hand a printed copy of your key to the helpers and tape a room sign at each doorway in the new place, using the same names as on the boxes. Ask movers to set boxes down in the room named on the label. At the end, walk through with your list and tick every number. If a number is missing, you will know which box to look for, and roughly what it holds, while the truck is still there.
For valuable or fragile boxes, add a second marking such as a bright sticker so that helpers handle them with extra care. Do not describe valuables in detail on the outside of a box; a room name and number are enough, and the list in your notebook holds the rest.
Common Scenarios
Boxes that hold items from several rooms
Try to avoid them. If it cannot be helped, label with the room where the box will be opened first, and note the other rooms in your list.
Using a professional moving company
Check the company’s current instructions about labelling and packing. They may have their own tags or numbering, and your labels should work alongside theirs.
Items in bags, bundles or odd shapes
Attach a tag with string or tape in a place that will not rub off, and write the room and number on it. Add the item to the list like a box.

Moving into a space that is not ready
Keep a holding zone with clear labels, and put the “open first” and tool boxes where you can reach them. The room names still apply when you are ready to move boxes through.
Mistakes to Avoid
- Labelling only the top. Stacked boxes hide their tops, so add a side label.
- Using old room names. Movers go by the names at the new place, so use those.
- Writing “stuff” or “misc”. Such words help nobody, so give two or three nouns.
- Not numbering. Without numbers you cannot tell whether a box has gone missing.
- Listing valuables in detail on the outside. The box label is visible to everyone, so keep details on your private list.
Quick Troubleshooting
| Symptom | Likely cause | What to try |
|---|---|---|
| Labels peel off boxes | Dusty cardboard or label on a seam | Wipe the surface, press edges down and avoid tape seams |
| Cannot read labels from a distance | Text too small | Rewrite larger, in dark ink |
| Box delivered to the wrong room | Room name unclear | Use plainer names and add door signs |
| A number is missing at the end | Box left behind or in another stack | Check the list for contents, then search the holding areas |
Glossary
- Key: the one-page list of room names, colors and handling marks.
- Holding area: a spot where boxes wait, grouped by destination.
- Open first box: a box with daily essentials to unpack early.
- Handling mark: a note such as fragile or this side up.
- Inventory list: your record of box numbers and contents.
Care and Upkeep During the Move
Labels face rough handling, so check them at each stage. Before loading, glance over every stack and re-stick any label that has lifted at a corner. If boxes wait in a damp garage or van, keep them off bare floors and away from moisture, since wet cardboard weakens and can tear a label away. Keep a pen, tape and spare labels in your essentials bag, so you can repair a label or add a missing one at the new place without hunting for supplies.
Supplies That Make Labels Last
A label is only useful if it survives packing, stacking, rain and rough hands. Choosing the right supplies before you start saves rewriting later. The basics are simple, and most are inexpensive.
- Markers: thick, dark permanent markers read best from a distance. Keep several, since they dry out quickly.
- Labels: blank adhesive labels, paper labels with tape over them, or direct writing on the box all work. Adhesive labels go on cleanly, but may peel from dusty or damp cardboard.
- Tape: wide packing tape holds the box closed and can also be laid over a paper label to protect it. Make sure the tape does not cover the writing in a way that causes glare.
- Color stickers or colored tape: handy for room coding, and visible from across a room or truck.
- Index cards or sheets of paper: useful for door signs at the new place that match your key.
Buy boxes in a few consistent sizes. Small boxes for heavy items such as books, medium boxes for kitchen and general goods, and large boxes for light bulky things such as bedding. Consistent boxes stack better, and a labeling scheme that includes a size code, such as S, M or L, helps movers choose how to load them.
Packing Order, Weight and Stacking
Good labeling goes together with good packing. A label cannot fix a box that is too heavy to lift or that collapses under another. As a general guideline, keep each box to a weight one person can lift safely, and put the heaviest items at the bottom with lighter ones on top. Fill gaps so contents do not shift, and tape the bottom with extra layers if the contents are heavy. Remember to lift with your legs and ask for help with anything awkward.
| Box contents | Suggested box | Label note |
|---|---|---|
| Books, tools, canned goods | Small and strong | Mark heavy and keep to a lifting limit |
| Dishes and glassware | Medium with padding | Mark fragile and this side up |
| Clothes, linens, towels | Large or wardrobe type | Room and number are enough |
| Electronics and cables | Original box if you have it | Note device name and do not stack |
| Cleaning supplies | Medium with a lid | Mark upright and keep apart from food |
Do not pack flammable liquids, propane, aerosols under pressure or other hazardous items with ordinary goods. Moving companies often refuse them, and you may need to dispose of them following local rules or carry them separately in your own vehicle. Check with your mover about their policies.
Special Cases: Fragile, Valuable and Essential Boxes
Some boxes deserve special treatment because the cost of losing or breaking them is higher. Mark them clearly and, where possible, keep control of them yourself.
- Fragile boxes: mark the word fragile on several sides and add an arrow showing the upright direction. Pad the contents well and avoid stacking heavy boxes on top.
- Valuables and documents: passports, deeds, medication, jewelry, laptops and backups are best carried with you. Do not label a box in a way that advertises valuable contents. Use a neutral note such as office papers or a number that only you can decode from your list.
- Open-first boxes: pack toiletries, phone chargers, a change of clothes, basic tools, paper plates, cutlery, coffee supplies and bed linens. Label them clearly, load them last and unload them first.
- Appliances and furniture parts: put screws, bolts and small parts in a sealed bag, tape it to the item or to the box labeled with the item’s name, and photograph assembly before you take furniture apart.
A Simple Inventory Sheet and Photo Habit
A written inventory pays off if a box goes missing, if you file an insurance claim, or if you simply cannot recall which box has the kettle. A spreadsheet or notebook with five columns is plenty: box number, room, short contents, size and condition notes. Add a column for who packed it if several people are helping.
- Update the list as you pack, not afterward, since memory fades fast.
- Take a quick photo of each closed, labeled box, or of a group of boxes, so you have a visual record of the condition they were in.
- Photograph the back of the television, the cable setup and other wiring before you disconnect anything.
- Keep a copy of the list on your phone and a printed copy with you on the day.
If you are using a professional moving company, ask what they require, as some companies number the boxes themselves and expect an inventory to be signed at pickup and delivery. Read the contract and valuation terms, and keep copies.
Unpacking Strategy and Reuse
The reward for good labeling comes at the other end. Plan to unpack in a sensible order: bedrooms and bathrooms first so that everyone can rest and wash, then the kitchen, then the living areas, and last the garage and storage. As each box is emptied, cross it off the list, flatten it, and set it aside for reuse or recycling. If a box is missing at the end, you will know immediately, while the details are fresh enough to track it down.
Keep your labels if you may move again, or take photos of the layout of your key. If you pass boxes on to a friend, cover the old labels with new ones so no one is confused. Most communities recycle cardboard, and local groups or neighbors often welcome used boxes.
A Timeline for the Weeks Before the Move
Labeling goes most smoothly when it is spread across several weeks instead of crammed into the last night. This general timeline can be shortened or stretched to fit your situation.
- Four to six weeks out: sort your belongings, decide what to keep, sell, donate or discard, and gather boxes and supplies. Write the key and print it.
- Two to three weeks out: start packing rarely used rooms and seasonal items. Number and label each box as you close it, and add it to the inventory.
- One week out: pack most of the remaining rooms, leaving only daily essentials. Make the open-first boxes and put up door signs for the new place if you can access it.
- Last two days: finish the kitchen and bathroom, recheck the inventory against the stacked boxes, and set aside valuables, medications and documents to travel with you.
- Moving day: keep the key and inventory handy, direct helpers by room name, and tick boxes off as they pass through the door.
A realistic schedule reduces rushed labels, and rushed labels are the main cause of misplaced boxes.
Working With Helpers and Movers
Labels are a way of communicating with people who do not know your house. The more clearly you set up the system, the less you will need to answer questions while carrying things. Brief helpers for a few minutes before they start, and post a copy of the key at the entrance of the old and new place.
- Walk the new place with the lead helper or mover and point to each room, using the same names you wrote on the labels.
- Tape a sign on every door at the new place showing the room name and, if you use them, the color code.
- Keep one person, ideally yourself, near the door with the list to answer questions and check off numbers.
- Ask helpers to put boxes down on the correct side of the room, such as against the wall, so that walkways stay clear.
- Offer water breaks and clear instructions about heavy lifting. Helpers should never lift more than they are comfortable with.
Handling Furniture, Garage Items and Odd Loads
Not everything fits in a box. Large pieces and awkward items still need identification, and a label strategy for them prevents confusion.
- Furniture: apply a removable label or a sticky note to the top or back with the room name. Use painter’s tape on finished surfaces and test it on an unseen spot first, since some adhesives can mark finishes.
- Mattresses and rugs: wrap in protective covers made for moving and write the room on the cover.
- Garage and garden tools: bundle long items with tape or straps and tag the bundle. Drain fuel from power equipment as the manual directs and do not transport it with fuel inside unless the maker says it is safe.
- Plants: label with the room, and check rules about moving plants across regions, since some areas restrict them.
- Pets and their supplies: pack a labeled pet kit with food, bowls, medication and a favorite toy, and keep it with you.
For unusual or valuable items, such as a piano, a safe or antiques, ask a professional mover with the right equipment. Label them in your inventory with measurements and any known damage before they are moved.
Ready to Buy? Start Here
If this guide helped you decide what to look for, these products are a place to start.
View Scotch Heavy Duty Shipping Packaging Tape on Amazon
As an Amazon Associate we earn from qualifying purchases. Prices and availability are shown on Amazon.
FAQ
Should I list every item inside?
A short summary is usually enough. Keep a fuller list in a notebook or spreadsheet, tied to the box number.
Can I use color coding alone?
Color helps at a glance, but pair it with a written room name for anyone who cannot tell colors apart or when labels fade.
How many labels should a box have?
Two is a good minimum: one on a long side and one on the top. A third on the opposite side helps if boxes go into tight stacks.
Is a printed label better than handwriting?
Printing is often more legible and can add a barcode. Large, neat handwriting with a thick marker works too.
What do I do about boxes I reuse?
Remove or fully cover the earlier labels so nobody follows old directions. A fresh label placed over a completely covered old one works well.
What should I write on moving boxes?
Write the destination room, a box number and a short contents note, and add a handling mark such as fragile or this side up if needed. Use big, dark letters on at least two sides so the label can be read when boxes are stacked.
How do I label boxes with valuable items?
Avoid advertising what is inside. Use a neutral note or a code that matches your private list, and keep the most valuable items, such as documents and jewelry, with you. Carry passports, medication and laptops yourself instead of putting them on a truck.
Should I number my moving boxes?
Yes. Numbering within each room, such as Kitchen 3 of 12, lets you check that everything arrived and spot a missing box quickly. Match the numbers to a written or digital inventory so the count is easy to verify at pickup and delivery.
What is an open-first box?
It is a box packed with items you need on the first night, such as toiletries, chargers, a change of clothes, basic tools, snacks, and bed linens. Label it clearly, load it last, and unload it first so you are not searching through boxes at the end of a long day.
How can I stop moving labels from peeling off?
Wipe dust from the box, press the label from the center outward, and cover it with a strip of clear packing tape if the box will be handled a lot. You can also write directly on the cardboard with a permanent marker, which cannot peel.
A Detailed Step-by-Step Labeling Routine for Moving Day
Labeling for a move succeeds or fails on routine. Boxes are packed under time pressure, often by several people at once, and a label written in a rush has to make sense weeks later in a different building, possibly to someone who was not there when it was packed. The routine below slows the labeling moment down just enough to make each label complete, while keeping the packing itself moving. Set it up once, at the start of the packing project, and every box that follows benefits.
Step one: set up a labeling station before the first box
Choose one spot as the labeling station and stock it properly: labels or wide tape strips, thick markers in a dark color, a contrasting marker for fragile or priority notes, your numbering list or notebook, and scissors. Packing goes wrong when the marker is in another room and someone decides to label the box later, because later often never comes, or comes after the box is buried in a stack. Keep a spare marker at the station and one in your pocket. If several people are packing, the station is also where finished boxes pause for a label check before they join the stack, which gives one person a chance to catch vague labels while the packer still remembers what went inside.
Step two: pack one box, then label it immediately
Make it a rule that a box is not closed until it is labeled, and not labeled until it is fully packed. Labeling an empty box in advance invites someone to add different contents; labeling a closed box from memory invites mistakes. As you finish filling a box, write its number, destination room and a short contents summary, then record the same details on your master list before taping the box shut. The order matters: the list entry is written while the contents are still visible, so the list becomes a trustworthy map of the whole move rather than a hopeful reconstruction.
Step three: label two adjoining faces, every time
Boxes in a truck or a storage stack rarely present the face you expect. The top may be covered by the next box, and one side will face the wall. Labeling two adjoining sides, plus the top if the box will be stacked high, means at least one label stays visible from almost any angle. Put the labels in the same position on every box, such as the upper corner of each face, so your eye learns where to look. Repeat the box number on every face you label; a room name alone is not enough when three boxes all say kitchen, and the number is what ties a physical box to its entry on your list.
Step four: add handling and priority marks where they belong
Mark fragile, this-side-up and heavy boxes at the labeling moment, on the same faces as the main labels, so handlers see everything in one glance. Add an open-first mark to the small number of boxes you will need on the first night, and keep that category rare or it stops meaning anything. If a box contains something you will need during the move itself, such as tools for furniture assembly or cleaning basics for the new place, say so plainly on the label rather than relying on remembering which box number it was.
Step five: do a label pass before the boxes move
Before loading, walk the stacks with your list and check that every box number on the list exists on a physical box, every box in the room is on the list, and every label is legible from standing height. This ten-minute pass catches the unlabeled box hiding behind the sofa and the box whose label was written on a flap that has since been taped over. Fix problems now, while there is still a marker in your hand and space to work, rather than at the other end where the same problem costs far more time.
Adapting Labels to Different Moving Situations
A local move across town, where boxes travel once and are unpacked within days, tolerates a lighter system: room, number and a brief contents line will carry you through. A long-distance move, or one where boxes go into storage for a while, deserves more detail on both the label and the list, because your memory of box number twelve will not survive two months in a storage unit. For storage, add the date packed and note anything that should not sit in heat or cold, and photograph each box with its label visible before it goes in, so you can check the photo instead of driving over to check the box.
Moves with helpers, whether friends or a professional crew, benefit from labels written for strangers. Spell the destination room the way the new home is actually laid out, and if room names could confuse, sketch a tiny plan and tape it by the front door at the new place so labels and rooms line up. For a phased move, where some boxes go now and some later, add the phase or the date of travel to the label so a later load does not accidentally take boxes meant to stay, and so the first load is not missing the things you need immediately.
Labeling also changes when only part of a household moves, such as a student leaving, a home splitting, or belongings dividing between two addresses. In that case the destination matters more than the room: put the address or the person’s name first and largest, and use a distinct label color per destination if you can. Mixed-destination stacks are where boxes most often travel to the wrong home, and a clear color signal at loading time prevents a mistake that is expensive to undo.
Label Materials and Placement That Survive the Trip
Cardboard is a decent labeling surface, but not all methods grip it equally. A thick permanent marker written straight onto the box never peels, never falls off in a damp truck, and stays readable; its weakness is that it cannot be corrected and looks untidy on a box you plan to reuse. Adhesive labels are neater and removable, but they lift from dusty, recycled or cold cardboard, and they can slide on a warm day in a closed vehicle. A strip of wide, clear packing tape over a paper label is a good compromise for boxes that will be handled a lot or stored, because the tape seals the label against scuffs and moisture. Whichever method you choose, test it on the first box and check it the next day; a method that fails on day one will fail on fifty boxes by moving day.
Placement deserves the same care as materials. Keep labels off the seams and tape lines, where they get covered or torn when the box is opened, and off the very bottom edge, where they scuff against floors and truck beds. The upper third of the box is the zone most likely to stay clean, dry and visible. On plastic totes, labels stick less willingly; a paper label inside a taped clear sleeve, or writing on a strip of tape applied to the tote, usually outlasts a label stuck straight onto textured plastic. For bags and soft items, tie a card tag through a handle or zip pull rather than sticking anything to fabric.
Troubleshooting Moving Labels
Labels peeling off in the truck or in storage
Peeling is usually a surface problem: dust, cold cardboard or a glossy recycled finish. Wipe the spot, press the label down firmly from the center outward, and overlay clear tape if the box faces a long trip or a damp store. If several labels fail the same way, switch methods for the remaining boxes rather than re-sticking the same product harder; marker directly on the box is the reliable fallback and takes seconds per box.
Marker bleeding, fading or becoming unreadable
Thin markers feather into corrugated cardboard and fade into the brown background. Use the thickest marker you have, write in large, simple lettering, and test contrast on the actual boxes you bought, since pale recycled board swallows some ink colors entirely. If a label has already faded, rewrite it on a fresh strip of pale tape or a stuck-on sheet of paper rather than tracing over the ghost of the old writing, which produces a blurry double image that is hard to read at a glance.
Running out of labels or numbers mid-move
It happens on almost every big move. The fix is to keep the numbering system flexible: continue the sequence in your list with a simple suffix or a new short series, and write the improvised numbers just as clearly on the boxes. What matters is that list and box agree, not that the sequence is elegant. Note the change on the list itself so the person unpacking is not confused by a jump in the numbers.
Common Labeling Mistakes on Moving Boxes
The most damaging mistake is the vague label: miscellaneous, stuff, or a room name with no contents at all. Vague labels feel fast while packing and become painfully slow while unpacking, when every vague box must be opened to find one needed item. Three or four honest content words cost almost no time and save repeated digging. The second mistake is labeling only the top of the box. Tops get covered the moment boxes are stacked, which is most of the time, so a top-only label is effectively no label for the whole journey. The third mistake is writing the label after taping the box and balancing it on a stack, producing cramped, slanted writing in the least visible spot; label on a flat surface, at a table or on the floor, before the box joins the stack.
A subtler mistake is inconsistent room names between the labels and the new home: boxes marked for the spare room when the crew is told to fill the study, or a box marked with the old home’s room names out of habit. Decide the new room names once, write them on your list header, and use only those words on labels. Finally, avoid putting sensitive details on the outside of boxes. A label that advertises valuable or personal contents is an unnecessary risk during loading, storage and delivery; use a neutral code word on the box and keep the full description in your private list, where it belongs.
Final Label Check Before Loading
Just before the first box leaves the room, pause for a last check. Every box has a number, and every number appears once on your list with a matching room and contents note. Two adjoining faces of every box are labeled in the standard position, and fragile or priority marks sit beside the main label rather than on a random flap. Open-first boxes are few, clearly marked, and loaded where they can come off early. Your list, photos and a spare marker travel with you, not inside a labeled box. If those points hold, unloading becomes a sorting exercise instead of a guessing game, and the labels have done the whole job they were made for.
More Questions About Labeling Packages for Moving
Should I label boxes in the order I pack them or by room?
Number them in the order you pack them, and record the room on the list and the label. Trying to keep separate number runs per room creates gaps and confusion when a room takes longer than expected. One continuous sequence is simpler to check at loading time, because a missing number is immediately obvious when you scan the list.
How detailed should the contents note on the box be?
Detailed enough to find a specific item without opening the box, brief enough to write in seconds. Three to six words naming the main categories inside usually hits that balance, with the full item-by-item detail kept on your master list if you want it. If you would hate to open a box hunting for one object, that object deserves a mention on the label itself.
What is the best way to label boxes someone else packed?
Ask the packer to pause before sealing, check the contents together, and write the label yourself or have them read the contents aloud while you write the list entry. If a sealed, unlabeled box turns up later, open it, label it properly and reseal it; guessing from weight and shaking is how mystery boxes are born, and mystery boxes are always the last ones unpacked.
Do garment bags and odd-shaped items need labels too?
Yes. Anything that travels as its own piece needs its destination and owner marked somehow. A tied card tag works for garment bags, suitcases and bundled items, and a strip of tape with the room written on it works for most hard objects. Unlabeled odd-shaped items are the ones most often left behind or delivered to the wrong room, precisely because they never joined the numbered system.
Labeling as You Unpack: Closing the Loop
A labeling system earns its keep twice: once when boxes are loaded, and again when they are unpacked. At the new home, check each box number off the list as it comes through the door, and note any box that arrives damaged or does not arrive at all while the crew or helpers are still present. That simple tally is only possible because every box carried a number, and it turns a vague worry about missing things into a short, specific list you can act on the same day. Boxes that land in the wrong room can be redirected immediately, before furniture is arranged around them.
Unpack in label order of priority rather than box position. Open-first boxes, then the boxes whose labels name daily essentials, then the rest room by room. As each box is emptied, cross it off the list and flatten it, so the shrinking stack of full boxes shows real progress. If you find an item in a box where the label said it should not be, correct the list entry rather than just shrugging; those small corrections are how you learn which part of your labeling routine needs tightening before the next move, and they keep the list trustworthy for the weeks when some boxes stay packed.
Some boxes always stay packed longer: seasonal items, archives, spares. For those, the label and the list become long-term storage records. Before they go to the loft, garage or storage unit, check that the label is still legible, add the storage location to your list, and consider a fresh label if the original is scuffed from the move. A box that will sit for a year deserves a label that can still be read in a year, in the light conditions where it will actually sit. Spending one minute per long-term box now prevents the classic outcome of a stack of anonymous boxes that nobody dares to open or throw away.
Keeping the system for the next move
When the dust settles, save your list and a few notes about what worked: how many boxes per room, which label method survived best, where labels were placed, and what you ran out of. Fold those notes into the box of moving supplies you keep, along with leftover labels and markers. The next move, even years later, then begins from experience instead of from zero, and the labeling routine described here becomes a habit your household already knows rather than a project to reinvent under pressure.
Labeling Boxes for Children, Helpers and Shared Unloading
When children are part of the move, labels can work for them too: a simple drawing or a color beside the room name helps a child carry their own boxes to the right room and feel included rather than underfoot. Keep the drawing as an addition to the proper label, never a replacement for it, because the adults and the crew still need the number and the room in words. For elderly helpers or anyone with limited lifting, a weight hint on the label, light or heavy in plain words, lets people choose boxes they can carry safely instead of discovering the load halfway up the stairs.
Shared unloading, where boxes are distributed between a house, a garage and perhaps a storage unit on the same day, benefits from one extra line on the label: the destination building, written as part of the room line. A box marked for the kitchen means little if nobody knows which building’s kitchen. Decide the building names before packing starts, use them consistently, and brief whoever drives or unloads on the names, so a label read aloud over a phone matches the list in your hand. That small discipline prevents the most exhausting moving-day error of all, which is carrying the same heavy box twice in two wrong directions.
A note on labeling the last boxes packed
The final boxes of any move are packed tired, in a hurry, surrounded by the oddments that fit nowhere else. They are also, reliably, the boxes most likely to be labeled badly or not at all. Protect them with a simple rule: the labeling station stays set up until the very last box is sealed, and oddments get an honest label naming the mixture and the room they came from. A box labeled honestly as mixed kitchen and hallway oddments will be opened early and sorted calmly; the same box labeled with a hopeful guess becomes a small grudge that follows you into the new home.
The Short Version
Make a key, number each box, label two sides and keep a list. Clear room names and handling marks save time at both ends of the move. Walk through with your list at the end, and you will know at once if anything is missing.

