Poly mailers are lightweight plastic envelopes for soft goods that do not need a rigid box. To choose well, compare four things: size, film thickness, seal style and how opaque the film is. A short checklist makes the decision quick, and the sections below add a worked example, common cases and the mistakes that cause split seals and torn corners.

Checklist Before You Order
Top pick
1. Size
Fold or roll your item the way you will actually pack it. Measure the folded width and length, then add a little room so the item slides in without force. A mailer that is too snug can strain the seal, while one that is far too large leaves a floppy tail.
2. Film thickness
Thicker film generally resists snags and punctures better, while thinner film is lighter and more flexible. Makers describe thickness in different units, so check the maker’s guide and compare like with like.
3. Seal style
Most mailers close with a strip of adhesive under a peel-off liner. Look at how wide the strip is and whether the flap has a second tear strip for easy opening on the receiving end. Press the seal firmly once and check that it holds.
4. Opacity
An opaque or lined film hides what is inside. A clear film lets you see the item, which can help you find a mix-up but gives no privacy.
In this guide
What Poly Mailers Suit and What They Do Not
- Suited to: folded clothing, soft textiles, flat soft goods, items that do not mind squeezing.
- Not suited to: breakable goods, items with sharp corners, anything that needs to keep a rigid shape.
- Use caution with: moisture-sensitive goods. Plastic film resists splashes but does not block every kind of wet. Add an inner wrap if needed.
How to Seal and Label One
- Smooth out the item inside and press out extra air toward the opening.
- Peel the liner and fold the flap over in one motion.
- Press along the whole strip with your palm.
- Stick the label on a flat area, away from the seal and any folds.
- Check that the barcode lies flat with no wrinkles.
When you are comparing options, order a small bundle of two sizes first. Pack your usual items, close them and look at how the film behaves at the corners and along the seal. A small trial batch keeps you from storing a large stack of the wrong size.
A Worked Example: Sizing for a Folded Sweater
The numbers below are invented to show the method, not to recommend a size. Suppose a folded sweater measures 30 units wide by 38 units long, and 6 units thick when pressed gently.
- Write down the folded width and length: 30 by 38, in whatever unit the maker uses.
- Add room for the opening and seal. Since the flap needs clear film to land on, leave a margin along the length, for example 5 extra units, giving a minimum of about 43 in length.
- Add a small allowance for width so the item slides in, for example 2 or 3 units, giving about 33 in width.
- Compare against the size labels in the maker’s guide and choose the nearest size above, not below.
- Check the thickness: a bulky item pushes the film outward and shortens the usable length, so a thick fold may need the next size up.
- Pack one sample, close the seal and see whether the flap lies flat without pulling.
Common Scenarios
- Shipping several small garments: roll or fold flat in one layer and avoid forcing them into a snug mailer. Two mailers can be safer than one overfilled one.
- Sending fabric with sharp trims: metal zips or hard buttons can rub through thin film, so cover them or choose thicker film.
- Returning an item: choose a mailer with a second tear strip if the receiver needs to reseal it, and cover old labels.
- Posting items you want to keep private: opaque or lined film hides the contents from view.
- Shipping in damp seasons: add an inner bag or wrap for goods that must stay dry.
Mistakes to Avoid
| Mistake | Why it matters |
|---|---|
| Overfilling the mailer | The film stretches thin and the seal is pulled apart in handling |
| Sealing over trapped air | A balloon of air can burst the film when parcels are stacked |
| Sealing with dusty fingers | Dirt weakens the adhesive strip |
| Putting the label across a fold | Barcode wrinkles make scanning harder |
| Storing mailers in heat or sun | Adhesive can soften and film can become brittle |
Storage and Reuse
Keep unused mailers flat in a cool, dry place, away from direct sun and heaters, with the liner side protected. Rolls or stacks left in a hot room can stick together or lose their grip. Reuse is possible when the film is whole and the seal still holds, but do not rely on a second seal for heavy or valuable goods. Where plastic film recycling exists locally, check the rules, because many programs ask for clean, dry film and removal of labels.
Quick Troubleshooting
| Symptom | Likely cause | What to try |
|---|---|---|
| Seal pops open in transit | Dust, folds or overfilling | Press the strip flat on a clean surface and use a larger size |
| Film rips at a corner | Sharp trim or thin film | Cover hard parts or choose thicker film |
| Label peels at the edge | Label placed over a wrinkle | Put the label on a flat, smooth area |
| Contents visible through the film | Clear or thin film | Use an opaque or lined style |
| Mailers stick together in storage | Heat or pressure on the stack | Store them flat in a cooler, drier place |
Buying and Ordering Notes
Order mailers in sizes you use most, and avoid stocking many sizes at once if your items are similar. If you sell different product types, group your sizes by item category so you can grab the right one quickly during packing. Check the maker’s guide for the stated dimensions, and note whether they include or exclude the flap, since that changes the usable space. Keep a record of the size you used for each product, so reorders stay consistent and you do not guess again each time.
Glossary
- Poly: short for polyethylene, a common plastic film.
- Gauge or mil or micron: units some makers use to describe film thickness.
- Peel-and-seal strip: the adhesive band covered by a liner.
- Tear strip: a pull strip that opens the mailer cleanly.
- Co-extruded film: film made from layers, sometimes with a dark inner layer for privacy.
- Gusset: a folded side that lets a bag expand.
Understanding Film Types and Thickness Numbers
Most poly mailers are made from polyethylene, but not all polyethylene film behaves the same way. Low-density film is soft and stretchy, so it tends to resist tearing but can balloon when overfilled. Higher-density or blended film feels crisper and thinner for the same strength, and it can be more prone to splitting along a crease once it has been folded sharply. Many mailers are co-extruded, meaning two or three layers are bonded together. A common arrangement is a light outer layer for printing and a dark inner layer so the contents cannot be seen through the film.
Thickness is where shoppers get confused, because sellers use several units. Some quote mils, where one mil is one thousandth of an inch. Others quote microns, which are thousandths of a millimeter, or a gauge number. A rough conversion is that one mil is about 25 microns, but a listing that uses one unit cannot be compared with a listing in another unless you convert. Treat any thickness figure as the seller’s stated specification and check the product page or datasheet for how it was measured.
Instead of chasing the thickest film, match the film to the contents. Light folded T-shirts do not need heavy film, and a heavier film adds weight and cost to every parcel. A bulky item with zippers, studs or hard trims is a different case, because those parts concentrate stress on a small area of film.
A Simple Way to Think About Thickness Grades
- Lighter grades suit flat, soft, low-risk items such as single garments, scarves or fabric samples.
- Middle grades suit most apparel, linens and soft accessories, including items with small buttons.
- Heavier grades suit bulky knitwear, items with hardware, or goods that will be handled roughly in a long journey.
These grades are a general framework, not a standard. Manufacturers do not use the same names for them, so check the actual stated thickness and the maker’s suggested uses.
Choosing Size by Product Category
A size chart is easier to build than to guess at each time you pack. Group your usual items into categories, pack one typical example of each, and note which mailer fits comfortably. The table below shows the kinds of items that often share a size class. It describes relative sizes only, because mailer dimensions vary by maker.
| Item type | How to fold or roll | Mailer size class |
|---|---|---|
| Single T-shirt or thin top | Fold into a flat rectangle | Small |
| Pair of leggings or light trousers | Fold in thirds, then in half | Small to medium |
| Hooded sweatshirt or knitwear | Fold flat and press out air | Medium to large |
| Bedding or towels | Roll tightly or fold and compress | Large |
| Several small accessories | Group in a thin inner bag | Small |
| Soft toys | Do not crush, allow loft | Large, or use a box |
Once you have found a fit, write the dimensions on a card and keep it near the packing table. That saves guessing and helps you avoid ordering an unnecessary range of sizes.
One more factor is the expansion of the item after it is released from your hands. Knitwear and padded jackets spring back, so a fold that looks slim on the table may bulge once it is inside the film. Push it into the mailer and check the flap before you remove the liner. If the film pulls tight or the flap will not lie flat, move up a size.
Packing Technique for Different Soft Goods
How you pack matters as much as the mailer you choose. A few habits help across most soft goods.
- Fold items flat and keep the profile even. A lumpy parcel is harder to handle and puts pressure on one spot of film.
- Press out air with your hand, working toward the open end. Air left inside can act like a cushion that pops under stacking weight.
- Slide the item in without scraping its edges along the adhesive strip, because dust and fibers on the strip lower its grip.
- Seal in one pass and press down along the full length, using the flat of your hand rather than your fingertips.
Garments With Hard Parts
Metal zippers, snap fasteners and rivets are the most common cause of punctures. Zip the zipper closed, fold so hard parts sit inside the fold, and consider a layer of tissue or a thin inner bag over them. If the item has a stiff collar or boxy shape, ask whether a small box might serve the customer better than a mailer.
Items That Must Stay Clean or Dry
Polyethylene film sheds light splashes, but seals are not guaranteed to be watertight, and stitched or taped edges can wick moisture. For goods that must arrive dry, such as undyed linens, put them in a sealed inner bag first. If the mailer itself is labeled as water resistant, read what the maker actually claims and do not assume more.
Light Items and Postal Weight
Because poly mailers weigh very little, they often keep a parcel in a lower price band at the carrier. That advantage disappears if you pick a mailer much bigger than necessary and the carrier prices by dimensional rules. Check the current rules from your carrier for envelope, flat and parcel categories, since they change, and do not rely on a figure remembered from a past year.
Cost, Quantity and Ordering Plan
Price per mailer generally falls as pack sizes rise, but a large carton of the wrong size is not a bargain. A sensible ordering plan begins with the numbers you actually ship rather than the numbers you hope to ship.
A four-step approach keeps the decision grounded.
- Count how many parcels of each category you sent in the last month or two.
- Pick the size class that covers most of them, then add one larger size for outliers.
- Buy a small pack of each first. Run a short trial with real items.
- Reorder in quantities that equal roughly one to two months of use, then adjust as volume changes.
Prices, shipping to your door and minimum order quantities vary widely by supplier, so compare the delivered cost per mailer, not just the sticker price per pack. If custom printing is on offer, check the minimum run and the lead time, because those can tie up money and storage for months.
Storage Space
Mailers are light but bulky. A few hundred small ones are easy to store, while a thousand large ones take a shelf or a carton. Keep them off the floor in a dry place, and keep the carton closed so dust does not settle on the adhesive.
Seal Failures and What Causes Them
Most complaints about poly mailers come down to the seal. The adhesive strip is a pressure-sensitive layer, and its performance depends on a clean, flat contact surface and steady pressure. Failures are typically one of four kinds.
- Contamination. Dust, powder from fabric, hand lotion or condensation on the strip keep the adhesive from bonding.
- Stress. A parcel stuffed past its limit pulls the flap apart as the film stretches.
- Temperature. Very cold conditions can make adhesive less tacky when sealed, and heat can soften it so it creeps. Seal at room temperature when you can.
- Age. Old stock with a dried or dusty strip may not stick as the maker intended. Use older stock first and check a sample before using a whole pack.
If a seal needs help, press it again from the center outward, wipe the film surface with a clean dry cloth, and avoid adding tape over the strip unless you are comfortable with how it will affect opening and recycling. Tape does help on a mailer that is likely to be heavily handled, but it makes reuse harder.
Environmental and Practical Considerations
Many sellers are asked about sustainability, and the facts are mixed, so avoid broad claims. Some mailers contain recycled content, and some are labeled as compostable or biodegradable. These terms mean different things, and compostable products often require industrial facilities that are not available everywhere. Read the maker’s description and your local waste rules before telling anyone how to dispose of a mailer.
A practical way to lower waste is to avoid sizes that are far too large, reduce failed seals that force a second mailer, and reuse clean mailers within your own operation, for example when sending samples. Light weight can also cut transport impact compared with a box, though the full picture depends on the carrier, route and what the box is made from.

Before You Start a Big Order
- Pack real items in each sample and tip the parcel upside down to see whether the seal holds.
- Squeeze a closed sample gently and check for air escaping through pinholes or weak points.
- Confirm the flap dimension and whether it is included in the listed size.
- Check whether the film is easy to write or print a label on without smudging.
Ready to Buy? Start Here
If this guide helped you decide what to look for, these products are a place to start.
As an Amazon Associate we earn from qualifying purchases. Prices and availability are shown on Amazon.
Matching Mailer Size to the Item, Not Just the Tape Measure
The tape measure gives you the starting point for choosing a poly mailer, but it does not tell the whole story. Two items with the same folded footprint can behave very differently inside a mailer. A soft cotton shirt compresses happily into a snug envelope, while a garment with a stiff collar, a boxed accessory, or a bundle of several pieces pushes back against the film and stresses the seal. When you size a mailer, think about the item in three states: flat on the table, folded the way you will actually pack it, and settled after the parcel has been handled, stacked, and squeezed in transit. The third state is the one that matters, because parcels rarely travel in the gentle conditions of your packing bench.
A practical way to judge fit is to pack a sample exactly as you would for a real order, then press down on the mailer the way a stack of other parcels might. If the seal area wrinkles, pulls, or starts to lift under that pressure, the mailer is too small even if the item technically fits. If the item slides around freely and the empty film flaps, the mailer is too large, and the contents can shift, crease, or bunch into a corner where the film takes all the strain. The middle ground, where the item sits still with a little room to settle, is what you are looking for. Test with your bulkiest realistic order, not your smallest, because the awkward orders are the ones that cause failures.
Allowing for thickness and bulk
Flat measurements hide thickness. A folded sweater may match a mailer on length and width yet be far too thick once folded, especially at the fold where layers stack up. As a habit, measure the folded item at its thickest point and compare that against how the mailer feels when closed, rather than trusting the flat dimensions printed on the pack. Items with uneven bulk, such as a hood, a belt buckle, or a padded section, need the room judged at the bulky spot, not at the average. If one corner is doing all the work of stretching the film, that corner is where a puncture or a split is most likely to begin.
When one size is not enough
Many small sellers begin with a single mailer size and stretch it to cover everything. That works until the product range grows. A small set of sizes, each matched to a group of similar products, usually packs faster and fails less often than one compromise size forced onto every order. Group your products by how they pack rather than by what they are: flat and flexible, soft and bulky, or light but awkward. Then assign a mailer size to each group and write the pairing down where packing happens, so the choice does not depend on memory or on whoever happens to be packing that day.
How Fragile Is the Item, Really?
Poly mailers protect against scuffs, dust, and light moisture, but they offer almost no protection against crushing or sharp impacts. The honest question to ask before choosing one is what could actually go wrong for this item on its journey. A t-shirt can be folded, pressed, and sat on without harm. A framed print, a boxed cosmetic with a rigid lid, or anything with corners that can bend or snap is a different matter. For those, the mailer alone is not the packaging; it is only the outer skin, and the real protection has to come from an inner layer such as a stiff card, a small box, or padding that holds its shape.
Fragility is not only about breakage. Some items are easily marked rather than broken: pale fabrics that pick up dirt through a torn film, printed surfaces that scuff when they rub, or goods with loose parts that can work their way through a weak seal. Think about the worst plausible handling, not the average handling. Parcels get dropped into bins, slid across floors, and stacked under heavier boxes. If the item would not survive being dropped from bench height onto a hard floor inside its mailer, it needs more than a mailer, whatever the film thickness.
Hard points and sharp edges
Zips, buckles, buttons, clasps, and the corners of inner boxes are the usual suspects when a mailer arrives torn. The damage often starts from the inside: a hard point presses against the film at one spot, and every jolt in transit works that spot until it gives way. Folding a soft layer over hard points, turning buckles inward, or adding a simple wrap before the item goes into the mailer removes most of this risk. It takes seconds and costs very little, and it protects the seal area as well, because an item that cannot shift cannot saw against the film near the closure.
Thinking About the Journey the Parcel Will Take
The same mailer can be a sensible choice for a short local trip and a poor choice for a long one. A parcel that travels across town spends little time in sorting systems and is handled fewer times. A parcel that crosses the country, or leaves it, passes through more depots, more conveyor belts, more loading and unloading, and more chances to be rained on, stacked heavily, or delayed in a hot or cold vehicle. You do not need to know the carrier’s exact route to allow for this. Simply ask how many handlings and how many days the parcel is likely to face, and step up your packing when the answer is many.
Weather and season play a part too. A mailer that sits in a delivery van through a wet week needs its seal and its label to hold in damp conditions, and an address written in ordinary ink may not. Longer journeys also raise the value of a clear, durable label and a return address, because the chance of a query or a return rises with distance. None of this requires special equipment. It is mostly about not packing a long-haul parcel with short-trip optimism.
Hand-offs, lockers, and doorstep time
Consider where the parcel will wait. A package left in a parcel locker, at a collection point, or on a doorstep may sit for hours or days before it is picked up. Film that is fine in a sorting office can be tested by sun, rain, or curious animals at a doorstep. If your customers often collect from lockers or shared delivery points, a slightly more robust mailer and a label placed flat and fully stuck down are worth the small extra effort. Equally, a mailer that looks clean and intact on arrival reflects well on the sender, which matters more when the buyer has waited longer for it.
The Most Common Sizing Mistakes and What They Cost
Choosing a mailer that is too small is the classic error. The item goes in with effort, the seal barely meets, and the parcel looks acceptable on the bench. In transit, pressure finds the weak points: the seal peels, a side seam splits, or a corner pokes through. The result can be a lost item, a damaged item, or a parcel held together by a carrier’s repair tape, none of which helps your reputation. A mailer that is too large causes quieter problems. The contents slide and crease, thin film can catch and tear on sorting equipment, and the parcel simply looks careless when it arrives.
Another frequent mistake is sizing from the product’s listed dimensions rather than from the packed item. Listings describe the product, not the product folded, wrapped, and combined with an invoice, a care card, or a small free gift, all of which add bulk. Measure the finished pack, the way it will actually leave your hands. Related to this is forgetting the seal flap itself: the usable space inside a mailer is smaller than its outside dimensions, because part of the length is taken up by the closure. If you size to the full outside measurements, you have quietly sized too small.
Keeping a sizing note that saves repeat mistakes
Most sizing errors repeat because nothing was written down. A short note for each product, recording the mailer size used and any inner protection, turns one person’s hard-won lesson into everyone’s default. When a return arrives with a torn mailer, note which size was used and whether the replacement goes up a size. Over a few months this simple record shows you which products sit on the border between sizes, which is exactly where failures cluster, and lets you fix the pairing before more parcels are affected.
Packing Soft Goods So They Arrive Looking Cared For
Most poly mailer orders are soft goods, and soft goods rarely break. Their risk is different: they arrive creased, marked, damp at one corner, or looking as though they were stuffed in as an afterthought. The mailer protects the item from the outside world, but the impression the parcel makes is created by how the item was folded and placed. Fold garments along their natural lines, keep printed or delicate surfaces facing inward or protected by a layer of tissue or a simple inner sleeve, and place the folded bundle in the mailer smoothly rather than pushing it in and letting it bunch. A bundle that goes in flat tends to come out flat.
Inner wrapping earns its keep in three quiet ways. It keeps the item clean if the outer film is scuffed or torn. It stops parts of the item rubbing against each other, which matters for printed designs, embellishments, and anything with a raised texture. And it gives the parcel a finished feel when opened, which costs little and is remembered. The inner layer does not need to be elaborate; it needs to be consistent, so every customer gets the same standard and every packer follows the same routine. Decide once what your standard pack looks like for each product group, write it into your sizing note, and the quality stops depending on who packed the order.
Multiple items in one mailer
When several items share a mailer, pack them as one considered bundle rather than as separate items in a bag. Fold or stack them into a single block with the most robust item outermost, keep any small loose pieces in the middle of the bundle where they cannot work towards the seal, and check that the combined thickness still leaves the seal a calm, flat close. Mixed orders are where sizing charts break down, because the combination, not any single item, decides the fit. If a common combination regularly strains the usual size, that combination deserves its own line in your notes and its own default mailer.
Seasonal and Weather-Aware Packing
The journey changes with the calendar. In wet seasons, parcels spend more time in damp vans, on wet doorsteps, and in lockers that are opened in the rain. That is the time to be stricter about seal quality, to place labels where they will not sit in pooled water on the parcel’s lowest face, and to consider an inner layer for items that water would ruin even in small amounts. In hot periods, adhesive behaviour changes and parcels may sit in warm vehicles; a seal pressed down firmly and fully matters more, and heat-sensitive items need thought about how long they will spend in transit, not just how they are wrapped.
Busy seasons change the risk in another way. When carriers are handling their highest volumes, parcels are stacked deeper, sorted faster, and handled by more temporary staff. Your packing standard should not quietly drop at exactly the moment the system is roughest. If anything, the peak season is when the sizing discipline, the seal check, and the hard-point protection described earlier pay for themselves. Sellers often respond to peak pressure by packing faster and checking less; the parcels that fail then generate returns and messages that consume far more time than the checking would have.
A short routine before any batch leaves
Whatever the season, a two-minute routine before a batch of mailers leaves the bench catches most problems while they are still free to fix. Pick up each parcel once. Feel for hard points pressing on the film. Check the seal lies flat and fully closed. Confirm the label is the right one for the parcel, readable, and firmly attached. Set aside anything that fails a check rather than letting it travel hopefully. This routine is deliberately tactile, because hands notice strain, looseness, and sharp points that eyes skimming a pile will miss, and it scales: ten parcels or a hundred, the same calm pass applies.
When a Mailer Is the Wrong Tool Altogether
Part of choosing poly mailers well is knowing when not to use one. If the item has rigid corners that must not bend, a shape that pressure would distort, a surface that any rubbing would spoil, or parts that can puncture film from inside despite wrapping, the honest answer is a different package, or at least a rigid inner structure that turns the mailer into an outer cover rather than the only protection. Sellers sometimes persist with mailers because they are cheap, light, and already in stock, but a package that regularly produces damaged arrivals is not cheap in any sense that matters: it costs replacements, return journeys, and the buyer’s confidence.
The decision is easier if you make it per product, in advance, rather than per order, under time pressure. For each product, settle whether it is mailer-only, mailer-over-inner-protection, or box-only, and record the decision with the sizing note. New products get the same assessment when they are listed, not after the first damaged arrival. This small discipline keeps the mailer in the role it is genuinely good at: a light, weather-resistant, tidy package for goods that do not need structure, and it keeps everything else in packaging that respects what the item actually is.
Building a Small Mailer Library and Keeping It Current
Over time, most regular senders build what amounts to a small library: a few mailer sizes, each with a known job, plus the notes that connect products to sizes. Treat that library as something maintained rather than something bought once. When a product is discontinued, its size may become spare capacity; when a new product arrives, it needs a packing decision before its first order, not after its first return. A short review whenever the range changes keeps the library honest and prevents the slow accumulation of half-used packs in odd sizes that nobody reaches for.
Store the library so the right size is the visible, reachable one. Label shelves or bins with the size and the product group it serves, keep the current favourite at bench height, and let the notes live where the mailers live. New helpers should be able to pack a standard order correctly on their first day using only what the bench tells them. That is the real test of everything in this guide: not whether the knowledge exists in someone’s head, but whether the workspace itself hands the right mailer to whoever is packing.
A Final Word on Proportion
It is possible to overthink a poly mailer, and this guide has deliberately not asked you to. The whole discipline reduces to a handful of habits: size to the packed item rather than the product listing, respect fragility honestly, allow for the journey, protect hard points, seal on a clean surface, and write down what worked. None of these requires new equipment or unusual expense. They require attention at the moment of packing, which is the cheapest moment in the entire life of an order to apply it.
Apply the habits consistently and the mailer becomes what it should be: an unremarkable part of an order the customer remembers for the product, not the packaging. That is the quiet standard worth aiming for, parcel after parcel, season after season.
FAQ
Can I reuse a poly mailer?
Some can be reused if the seal still works and the film has no holes. Cover or remove any old labels and barcodes first.
Are there size limits I should know about?
Carriers set their own limits for envelope and parcel types. Check the carrier’s current instructions for the exact rules.
Do I need a thicker mailer for heavier items?
Thicker film resists snags better, but weight is mostly about how the load is spread. If an item is heavy or has edges, a box is often the safer format.
Should I write on the mailer?
You can add handwriting only if the surface accepts it and the text stays readable. A label on a flat, clean area is usually clearer for scanning.
Can poly mailers go in the household recycling?
That depends on local rules. Many areas collect plastic film separately, so check what your local scheme says before you put it in the usual bin.
What is the difference between a mil and a micron for poly mailer film?
Both measure film thickness. A mil is one thousandth of an inch, and a micron is one thousandth of a millimeter, so one mil is roughly 25 microns. Sellers use different units, so convert before comparing listings, and treat the figure as the seller’s stated specification.
How do I stop poly mailer seals from failing?
Keep the strip clean and dry, press out trapped air, avoid overfilling, and press along the whole seal with your palm. Seal at room temperature when possible, and use fresh stock, because old or dusty adhesive may not bond as well.
Are poly mailers waterproof?
Not reliably. Polyethylene film sheds light splashes, but seals and edges are not guaranteed watertight. For goods that must stay dry, add a sealed inner bag, and read exactly what the maker claims if a mailer is labeled water resistant.
How many poly mailer sizes should I stock?
Most sellers manage with two or three sizes that cover the bulk of their items, plus one larger size for outliers. Count your recent parcels, trial small packs first, and add sizes only when a real product does not fit.
Do compostable poly mailers go in the home compost bin?
Not necessarily. Many compostable mailers need industrial composting conditions, which home bins may not reach. Check the maker’s disposal instructions and your local waste rules before composting or recycling any mailer.
How do I know if a poly mailer is too small without wasting one?
Pack a sample order exactly as you would send it, close the mailer, and press firmly on the parcel as if it were under a stack of other packages. If the seal lifts, the film strains white at any point, or a hard part of the item presses sharply against the film, the size is too small. A mailer that only just closes on the bench will usually fail in transit, where pressure and movement are greater.
Can I put a fragile item in a poly mailer if I add padding?
Padding helps, but the mailer itself still provides no crush resistance. If the item could be damaged by being stacked under heavy parcels or dropped, give it a rigid inner layer first, such as a small box or stiff card, and treat the mailer as a weather-resistant outer cover. If you cannot protect the item from crushing, a box is the safer main package.
Should I use a bigger mailer for orders travelling a long way?
Distance itself does not demand a bigger size, but a longer journey means more handling, more stacking, and more weather exposure. For long trips, check the seal and label adhesion with extra care, protect hard points inside, and consider a sturdier film rather than a larger one. Size should still match the packed item; extra empty space lets contents shift and crease.
Why did my mailer arrive open even though the seal looked fine?
The usual causes are a seal that was pressed onto a dusty, damp, or wrinkled surface, a mailer filled so full that pressure worked the closure open, or film stretched thin at one spot by a hard point inside. Sealing on a clean, flat surface, leaving a little settling room, and folding soft material over buckles and zips prevents most of these failures.
The Short Version
Match the mailer to the folded item, choose a thickness that suits the contents, check the seal, and decide how much privacy you want from the film. Keep poly mailers for soft goods and use boxes for anything fragile or rigid.


