Disclosure: As an Amazon Associate, reviewstook.com earns from qualifying purchases. Links to Amazon on this page are affiliate links; they cost you nothing extra.
Both formats add height effects, but support depends on your content and equipment.
Last updated: October 31, 2026.

Dolby Atmos
Widely supported by streaming and discs. See Atmos soundbars.
In this guide
DTS:X
Mainly on discs and some players.
Which Matters
Atmos matters more for streaming; many soundbars support both.
How object-based audio works
Both Dolby Atmos and DTS:X are object-based formats. Instead of sending audio only to fixed channels, the mix describes sounds as objects with a position in space, and your equipment decides how to play them using the speakers it has. That is why the same Atmos or DTS:X track can play on a large speaker setup or on a single soundbar.
For a soundbar, this means the bar’s design decides what you hear. A bar with upward-firing drivers bounces sound off the ceiling to create height. A bar without them uses processing to suggest height, and results vary by room and by product. Neither approach turns a soundbar into a full speaker system, so keep expectations realistic.
The format only matters if your content carries it. A movie or show must be mixed in Atmos or DTS:X, and your player or app must pass it to the soundbar. If the content is a standard stereo or 5.1 mix, the bar will use its normal modes or upmix it.
Check the listing for which formats the bar decodes. Some support one, some both, and some only accept a basic stream.
Room and ceiling considerations
Height effects depend a lot on the room. Upward-firing drivers work best with a flat, reasonably low ceiling that reflects sound. Very high, vaulted or soft acoustic ceilings can weaken the effect. Check the maker’s guidance on ceiling height in the manual or listing.
Room size matters too. A small bedroom may not need a large multi-speaker bar, while a big living room may need more power and wider coverage. Separate rear speakers, where included, can improve surround effects but take extra space and sometimes need power outlets.
Placement is important. Put the bar centered below the TV and keep it clear of obstructions. If the bar sits inside a cabinet or shelf, upward-firing sound can be blocked. Leave space above it and avoid placing items on top.
A subwoofer adds low-frequency weight, and many Atmos-capable bars include one. Check if it is wireless and where it should be placed. Corners increase bass but can make it boomy, so try a few spots.
Connecting and passing the signal
To receive full Atmos or DTS:X, the soundbar must receive the right signal. The usual route is an HDMI connection through the TV’s eARC or ARC port. Atmos delivered over a standard ARC connection can be limited to a compressed form, while eARC supports higher quality audio. Check your TV manual to see which HDMI port is labeled, and the soundbar listing to see its supported formats.
Optical cables do not carry Atmos, and they have limited bandwidth. If your bar offers an HDMI input, you might connect devices to the bar directly and send video through to the TV. Make sure the bar passes the video features you use.
Source settings matter. Streaming apps and players have audio output settings that may need to be set to bitstream or the highest quality option. Some TVs default to stereo output, so open the sound menu and select the external speaker output. Then check the bar’s display or app to confirm it shows the incoming format.
Also check whether your streaming device itself supports the format you want.
What to check in a listing
Marketing terms can be confusing, so read the specifications carefully. A bar labeled as Atmos might decode the format but produce height with processing alone, so check whether it has upward-firing drivers if that matters to you.
- Format support: Atmos, DTS:X or both.
- Channel layout: numbers like 3.1.2 or 5.1.2 describe front, bass and height channels.
- HDMI features: eARC, passthrough and the video formats it supports.
- Subwoofer and rears: included or optional, wired or wireless.
- Calibration: room correction or an app for setup.
Read the manual if available. Look at whether the bar can be expanded later with rear speakers. Consider your TV as well, because some TVs limit audio formats on their outputs.
Avoid buying only because of a format badge. A well-built bar with good dialog clarity can sound better in daily use than a poorly tuned bar with more labels.
Setting up and testing height effects
After connecting, test the setup with content you know carries Atmos or DTS:X. Many streaming services label titles that include Atmos, and discs list the format on the packaging. Play a scene with overhead effects, such as rain or helicopters, and check the bar’s indicator to confirm the format is being received.
If you do not hear height effects, work through the chain: the content, the app or player output setting, the HDMI port and cable, the TV audio setting and the bar’s own mode. Some bars have a dedicated mode for height, and some need it enabled.
Adjust the height level if the bar has that option. Too much can sound unnatural, while too little makes the effect hard to notice. Also use a dialog or voice mode if speech is hard to hear.
Keep firmware updated through the maker’s app, following the manual, since updates can add features or fix compatibility issues. If something still does not work, try a different HDMI cable certified for your connection type, and test with another source.
Where Each Format Actually Shows Up
Before comparing logos, it helps to know where you will hear each format. Dolby Atmos is carried by most major streaming services on supported plans, by many 4K Ultra HD Blu-ray discs, by some game consoles, and by a large share of current TVs that can pass it on. DTS:X is more common on physical discs and on certain network players and media boxes than on streaming apps. That does not make one format better. It means the practical value depends on what you actually play.
A useful exercise is to list your five most common sources: the TV’s built-in apps, a streaming stick, a game console, a disc player, and perhaps a PC. For each one, check in its settings or on the service’s help pages whether it can output Atmos, DTS:X, or only standard surround. Service plans and device models change, so confirm against the current documentation rather than assuming.
- Streaming apps usually mark supported titles with an Atmos badge on the title page, but the badge only matters if your plan and device both support it.
- Discs list the audio tracks on the case or in the audio menu. A track labeled Atmos or DTS:X is the object-based one; a Dolby Digital or DTS core track is the older fallback.
- Game consoles and PCs often have a separate audio setting that must be switched on before spatial formats are sent out.
If nearly everything you watch is streamed, Atmos support is likely to matter more. If you collect discs, check whether your favorites carry DTS:X tracks, and confirm the soundbar decodes them. Many bars decode both, which removes the question entirely.
Soundbar Layouts and What They Imply
Soundbars come in several layouts, and the layout shapes how convincing any height effect can be. Understanding them helps you read a product page without relying on marketing language.
Single-bar designs
A single bar sits under the TV and, in Atmos-capable versions, includes upward-firing drivers that bounce sound off the ceiling. These are the simplest to install and work best in rooms with a flat, reasonably low ceiling. They create a sense of space above you, but the effect is usually subtler than with dedicated overhead speakers.
Bar plus subwoofer
Adding a wireless subwoofer does not change which format you can decode, but it changes how explosions, engines, and music low end feel. Many people notice that a subwoofer improves the overall impression more than extra height channels do. If your budget is limited, a good bar with a sub can beat a more elaborate bar without one.
Bar plus rear speakers
Rear speakers, either included or sold separately, move effects behind the listening position. Some include their own upward-firing drivers. This layout makes the biggest difference for people who sit at a fixed spot and want sounds to pass behind them. It also adds cable or power requirements, so plan where each unit will plug in.
Separates and receiver systems
If you outgrow a bar, an AV receiver with real ceiling speakers is the more precise path to height audio. It costs more, takes more planning, and often involves running wire. It is worth considering only if you have a dedicated viewing room and enjoy tinkering.
Three Room Examples
The examples below are invented scenarios meant to show how to think, not measurements from any real home.
A small apartment living room
The ceiling is standard height, the sofa is a few feet from the TV, and neighbors share a wall. Here a single Atmos bar with a modest subwoofer is usually sensible. Loud bass can travel through walls, so look for a subwoofer level control and a night mode. Height effects will be gentle at this distance, and that is fine for casual viewing.
A large open-plan space with a high or sloped ceiling
Upward-firing drivers depend on a reflective surface at a predictable distance. Very high, vaulted, or heavily textured ceilings can scatter the sound. In this kind of room, adding rear speakers often gives a more noticeable improvement than relying on bounce alone, and some buyers prefer to skip the height feature and invest in a better bar and subwoofer instead.
A bedroom or den with a wall-mounted TV
If the bar sits close to the wall and the seating is near, the sound may be absorbed or reflected unevenly by nearby furniture and bedding. A shelf-mounted bar with a little clearance in front often sounds clearer than one tucked into a recess. Keep the area in front of the bar free of objects that block the drivers.
Getting Better Results from the Setup Menu
Most disappointing soundbar experiences come from settings, not hardware. After you connect the bar, take a few minutes to work through the following.
- On the TV, set the audio output to passthrough, bitstream, or auto, rather than forcing PCM, so the bar receives the original encoded signal.
- On each source device, switch the audio format setting to the highest option it offers, often labeled Auto or Bitstream.
- Turn off any TV sound enhancements that process audio before it leaves the set.
- Check whether the bar has a voice or dialogue mode, and set it to taste. Dialogue clarity affects daily satisfaction more than height effects.
- If the bar has a calibration feature or companion app, run it from your normal seating position, with the room as quiet as possible.
Many bars display the incoming format on the unit or in the app. Use a demo clip or a known Atmos title to confirm that the display changes to the expected label. If it shows standard surround, trace the chain from the source to the TV to the bar and check each device’s setting in turn. A single device set to a basic stereo output can quietly downgrade everything.
Common Reasons Height Effects Disappoint
Height audio is subtle by design. Filmmakers use overhead sound for rain, helicopters, ambience, and the occasional dramatic moment, not constantly. If you expect sounds to fly across the ceiling all the time, you may feel let down even when everything is working. A few other causes are worth checking.
- The content is not actually object-based. Many titles carry only a standard surround track.
- The bar has been placed inside a cabinet, where reflections and obstructions muddy the sound.
- The ceiling is too high, angled, or covered with absorbent material.
- The listener is seated far to one side, so the bounce angle does not reach them as intended.
- The volume is so low that small height cues fall below the noise of the room.
Try a short demo scene with obvious overhead sound at a moderate listening level. If you still cannot perceive any height, consult the manual for the recommended bar placement and distance to the ceiling, and contact the manufacturer if the unit seems faulty.

Deciding Whether to Spend More
It also helps to separate needs from nice-to-haves. A need is something that fixes a daily annoyance, such as muddy dialogue or weak bass. A nice-to-have is something you might notice only on a few demo scenes, such as a precise overhead effect. Spend first on needs, and treat extra channels as a bonus rather than the reason for the purchase.
Price tiers in soundbars usually add speakers, drivers, and processing. Each addition has a different payoff. A subwoofer improves low frequency impact. Rear speakers improve envelopment. Upward-firing drivers add a sense of height. Better room correction improves consistency from room to room. Rank those against your own complaints. If dialogue is hard to understand, a center-focused bar matters most. If movies feel flat, bass and surrounds matter more. If music is your priority, check how the bar handles stereo content, because format support does not guarantee good music reproduction.
Finally, read the return policy before purchase. Sound quality is personal and room dependent, and a store that allows returns gives you a safer way to find out whether a given bar suits your space. A short trial period at home, with your own TV and your own favorite scenes, is worth more than any spec comparison. Keep the packaging until you are sure about the purchase. Always follow the manufacturer’s instructions for mounting and placement, especially if you plan to hang a bar on a wall.
Ready to Buy? Start Here
If this guide helped you decide what to look for, these products are a place to start.
As an Amazon Associate we earn from qualifying purchases. Prices and availability are shown on Amazon.
Deciding Between the Formats with Your Own Content, Room and Budget in Mind
The earlier sections explain what object-based audio is and how the two formats differ on paper. This section is about the decision itself: how to weigh the formats against the programmes and discs you actually own, the room you actually sit in and the equipment you already have, so that you neither overspend on height effects you will rarely hear nor underspend and miss an experience you would have loved.
Audit Your Content Before You Audit Any Soundbar
Make a short, honest list of what you watch in a typical month and where it comes from. Streaming services, broadcast television, game consoles and disc players all differ in which formats they offer and in how much of their catalogue uses height effects at all. If most of your viewing is news, sport and ordinary drama, the practical difference between the formats will be small and your money is better directed at dialogue clarity and overall balance. If films and prestige series with modern sound mixes dominate your evenings, height capability becomes a real part of the experience and deserves a larger share of your attention. Let the catalogue you already enjoy lead the decision, not a demonstration clip chosen to flatter the technology.
Be equally honest about your ceiling and your seating
Height effects from a soundbar depend on sound reaching the ceiling and returning to your seat in a controlled way, so the room can veto the technology no matter which format you choose. A flat, unobstructed ceiling at a moderate height above the bar gives the effect its best chance. Vaulted, beamed, very high or heavily treated ceilings scatter or absorb the reflection, and seating placed far back or off to one side weakens it further. In such rooms, a capable bar without height ambitions, or a system that uses real speakers positioned above the listener, will usually satisfy more than an expensive bar fighting the architecture. Walk into your room, look up, and let that view carry real weight in the decision.
How to Test Height Effects Fairly Before You Commit
If you can test a bar at home, choose scenes for their sustained atmosphere rather than for a single dramatic overhead moment. Rain, crowd ambience, a helicopter pass and a score that swells around the room reveal whether the height layer feels integrated or like a novelty effect pasted on top. Sit in every seat your household uses, not just the centre one, and listen at your normal evening volume, because height effects that only appear when the system is loud are of limited use in a family home. Compare the same scene with the height processing reduced or switched off where the bar allows it. If you cannot hear a worthwhile difference in your room, believe your ears and spend the difference elsewhere in the setup.
Where the Money Works Hardest in a Height-Capable Setup
When buyers do commit to object-based audio, the spending order matters. First, secure the connection path that can actually carry the formats from your sources to the bar, because no bar can play what never reaches it. Second, favour a bar whose basic stereo and centre performance is strong, since the overwhelming majority of every soundtrack is still ordinary sound at ear level. Third, consider whether rear speakers would add more to your room than additional height processing, because envelopment at ear level is what many viewers are really missing. Height capability bought after those three foundations are sound will impress; height capability bought instead of them usually disappoints, whichever badge is on the box.
Living with the Choice: Settings and Expectations
Owners who enjoy these systems most tend to set them up once, carefully, and then leave them alone. Run any automatic calibration the bar offers with the room arranged as it is during viewing, keep microphone positions at ear height where you sit, and then judge the result across a week of normal content rather than chasing perfection scene by scene. Expect variation between programmes, because mixes differ enormously in how actively they use the height layer. A quiet drama may offer almost nothing overhead while a modern action film fills the room, and that variation reflects the content, not a fault in your setup or a reason to keep adjusting it.
More Practical Guidance Before You Decide
Listen in the room you actually use, not in a showroom mindset
A soundbar that impresses in a short demo can feel different across a full evening of mixed content, so judge any pick in this list by how it handles the handover between quiet dialogue, a sudden action peak and then music under the closing credits. Keep the volume where you normally watch and pay attention to whether you keep reaching for the remote. If you are constantly riding the volume control, the balance between voices and effects is wrong for your room, no matter how exciting the loud moments feel. Small adjustments to placement and to the dialogue or night settings usually matter more at that point than swapping to a different bar altogether.
Why placement changes the result more than most settings
Soundbars fire sound forward into the room, so whatever sits in front of them shapes what you hear. A bar pushed to the back of a deep shelf, hidden behind the lower edge of the television or tucked inside a cabinet with a closed front will sound muffled even if it performed well in open air. Give the drivers a clear line into the room, keep the front edge of the bar close to the front edge of the furniture, and leave space at the sides where the design expects it. If your bar uses upward-firing drivers, the ceiling becomes part of the system, so a clear path upward matters just as much as the space in front.
A simple first-week routine that settles a new bar in
During the first week, resist the urge to change every setting at once. Start with the standard sound mode, set the bass to a neutral level and watch the kind of programmes you watch most. Change one thing at a time on the following nights: try the dialogue setting on a drama, the night setting after others have gone to bed, and the music setting with a familiar album. Note which changes you keep. That short, patient routine tells you more about whether a pick suits your household than any single test clip, and it prevents the common trap of judging a bar on settings you would never use again.
Care and cleaning that keep a bar sounding consistent
Dust settles on speaker grilles and inside the small gaps around buttons and ports, and over time a heavy build-up can dull the top end and make controls feel sticky. Wipe the cabinet and grille gently with a dry or very slightly damp soft cloth, keep sprays away from the drivers, and check the rear ports occasionally so cables sit fully home. Keep the bar out of long periods of direct sunlight and away from radiators, because heat and ultraviolet light age plastics and adhesives. If the bar has a separate subwoofer, give its driver the same gentle treatment and keep its port free of household clutter.
How to compare two bars fairly at home
When you are torn between two picks in this guide, compare them on the same scenes, at matched loudness, from your normal seat. Louder almost always sounds better in a quick comparison, so take a moment to level-match by ear on a dialogue passage before judging tone. Listen for three things: whether voices stay clear when music and effects join in, whether bass supports the scene without booming on male voices, and whether the sound stays comfortable over a long episode rather than fatiguing you. The bar that wins on those everyday tests is usually the right choice, even if the other one produces a bigger first impression.
Room features that help or hurt any soundbar
Hard, bare rooms with wooden floors, large windows and little soft furnishing reflect sound and can make any bar seem harsh or echoey, while heavily furnished rooms absorb energy and can make the same bar feel restrained. You cannot rebuild the room around a soundbar, but small changes help: a rug between the bar and your seat, curtains drawn during films, and keeping the bar away from a corner where bass builds up unevenly. Mention your room honestly when you weigh the picks above. A compact bar in a small, soft room often delivers a more satisfying result than a large bar fighting a big, reflective space.
When to troubleshoot settings before blaming the hardware
Many complaints about thin sound, weak bass or unclear voices trace back to a setting in the television rather than to the bar itself. Check that the television is sending the format the bar expects, that any downmix or night compression in the television menu is not fighting the bar settings, and that the correct input is selected after switching sources. Work through one change at a time and re-test with the same scene. Only when the settings on both devices agree and the problem remains is it sensible to conclude that the pick itself is a poor match for your room or your content.
Thinking about the household, not just the main viewer
A soundbar serves everyone in the room, and the best pick for the person in the centre seat may not suit a partner who sits to the side, children who watch at lower volume, or a family member who mainly listens from the kitchen doorway while cooking. Consider viewing angles, typical volume and how often the bar will be used for music or sport rather than films. Picks with clear dialogue modes and forgiving wide dispersion tend to please mixed households, while a bar tuned purely for cinematic impact can leave everyday television feeling overblown. Match the pick to the household pattern, not to a single ideal film night.
Real-World Scenarios and Long-Term Ownership
Scenario: film nights in a family living room
Picture a typical Friday evening: children on the floor, adults on the sofa, a film that swings between whispered conversation and loud set pieces. In that setting the winning qualities are balance and forgiveness. Voices must stay clear without anyone guarding the remote, bass must support the action without shaking the room during dialogue scenes, and the bar must behave identically whether the film comes from a streaming app, a broadcaster or a player. When you read the picks above with this scenario in mind, favour the models described as composed and easy to control over those described as dramatic, because drama is easy to add with volume while composure cannot be added afterwards.
Scenario: sport, news and daytime television
Daytime and sports viewing make different demands from films. Commentary needs to sit clearly above crowd noise, news presenters need to stay intelligible at modest volume while the household moves around, and the sound should remain comfortable for hours rather than impressive for minutes. Bars and speakers with a forward, clear presentation suit this pattern best, and a dialogue setting that works well at low volume is worth more here than any surround effect. If this is most of your viewing, weight the sections of this guide that discuss speech and everyday settings heavily, and treat cinematic scale as a pleasant extra rather than the deciding factor.
Scenario: gaming through a soundbar
Games reward a setup that keeps effects, music and voice chat in balance for long sessions at close range. Explosions that impress in a film can fatigue during an evening of play, and any noticeable delay between action and sound becomes distracting far sooner than it does with passive viewing. Keep the connection path as direct as your equipment allows, use the sound mode that sounds most natural rather than the most processed, and set volume for comfort across a whole session instead of for the loudest moment. Players who share the room with others should also value good low-volume clarity, because most gaming happens while the rest of the household is awake to something else.
Scenario: music as a serious second job
Many bars spend as many hours playing music as television, yet buyers often test only film clips. A bar that handles music well keeps vocals natural, separates instruments without harshness and produces bass that follows the rhythm instead of booming over it. Try familiar tracks when you compare the picks, including one quiet acoustic piece and one busy, produced recording, and listen from where you actually sit or stand while music plays, which is often not the centre seat. If music matters equally with television in your home, let that test carry real weight, even if it means choosing the more balanced pick over the more cinematic one.
Living with neighbours, thin walls and shared spaces
In flats and terraced homes, the best soundbar is partly a social decision. Bass travels through structures in a way that voices do not, so a setup that sounds modest in your room can still disturb the home below or beside you. Favour picks and settings that keep dialogue clear at lower overall volume, use night settings without embarrassment, and place any subwoofer away from shared walls and off bare floors where a mat or furniture can soften transmission. A courteous setup that you can enjoy at any hour is worth more than a powerful one you feel obliged to keep turned down and apologetic.
Upgrading later without starting again
A soundbar purchase does not have to be the end of the system. Some owners later add rear speakers, move the bar to a second room when they upgrade the main set, or hand it on to a family member with a smaller television. When you compare the picks, consider which one would still make sense in that second life: a versatile bar with common connections and simple controls adapts to a new room far better than a highly specialised model. Keep the box, the remote and any brackets and feet you did not use, because a complete kit moves rooms, and homes, far more gracefully than a bare bar with missing parts.
Understanding warranties, support and everyday reliability
Soundbars are simple products, but remotes fail, ports get damaged and software occasionally needs attention. Before you buy, check how the maker supports the product in your country, whether replacement remotes are easy to obtain, and whether firmware can be updated without specialist help. Register the product if the maker offers it, keep proof of purchase with the manual, and note the exact model name somewhere you can find it later, because support conversations go far faster when you can name the product precisely. These dull details rarely decide between two similar picks, yet they decide how painless ownership feels in year three.
A note on volume, hearing comfort and long sessions
Any system that makes sound clearer also makes it easy to listen louder than intended, especially during action films and games. Keep long sessions at a level where you could still hold a conversation without raising your voice, take breaks during marathon viewing, and be particularly careful with children, who will happily sit close to a loud bar for hours. Clarity should be doing the work, not volume: if you find yourself turning a new setup up week after week to achieve the same satisfaction, revisit placement and settings instead, and consider whether the room or the pick itself needs attention.
Further Notes for Confident Buying and Ownership
How sound changes as you move around the home
Television sound is rarely enjoyed from one perfect seat alone. People listen while cooking, ironing, working at a table or drifting in and out of the room, and a setup that only impresses from the centre cushion is less useful than it first appears. Walk around during a familiar programme after installing any pick from this guide and notice where voices stay clear and where they fade. You cannot make every corner perfect, but small changes in bar position, angle and balance can widen the area that works well. Households that value that everyday coverage should favour forgiving, balanced picks over narrowly focused ones.
Why the first impression of a new setup often misleads
New audio equipment almost always sounds startlingly different on the first evening, partly because it is different and partly because you are listening harder than usual. Brightness can feel like clarity, strong bass can feel like quality and sheer loudness can feel like improvement. Give the setup several days and a range of ordinary content before judging it, and keep returning to the same test: can you follow speech effortlessly at your normal volume, and can you listen for a whole evening without tiredness. Picks that pass those quiet tests are the ones owners still praise a year later, long after the first-evening excitement has faded.
Frequently Asked Questions
Do I need both?
Not necessarily.
Virtual Atmos?
Some bars simulate height.
eARC needed?
For lossless Atmos.
Can a soundbar without upward-firing speakers play Atmos?
Many can decode the format and use processing to suggest height. The effect is different from bouncing sound off the ceiling, so check the listing for how the bar creates height.
What do numbers like 5.1.2 mean?
The first number is the front and surround channels, the second is the subwoofer and the third is the height channels. Check the listing to see which are built in and which are optional.
Why does my soundbar show Dolby Digital instead of Atmos?
The content may not contain Atmos, or an app, player or TV setting may be limiting the output. Check the source, set audio output to the highest option and use the eARC or ARC HDMI port.
Does the ceiling affect height speakers?
Yes. Upward-firing drivers rely on reflection, so very high or soft ceilings can reduce the effect. The manual often explains ideal ceiling conditions.
Do I need a special HDMI cable for eARC?
Use a good quality HDMI cable that supports the connection type and check the listing for guidance. Poor cables can cause dropouts.
Is DTS:X support important for streaming?
Atmos is more common in streaming, while DTS:X mostly appears on discs and some players. Choose based on what you watch and check which formats your sources output.
Can I add rear speakers later?
Some soundbars can be expanded with wireless rear speakers and some cannot. Check the product listing before buying if you want to expand.
Is Dolby Atmos worth it for a small room?
It can be, but the benefit is usually modest. In a small room with a standard ceiling, an Atmos bar can add a gentle sense of space. A good subwoofer and clear dialogue often matter more. If the price difference is small, Atmos support is a reasonable feature to have.
Do I need Atmos content to benefit from an Atmos soundbar?
No. Most Atmos soundbars also play regular stereo and surround content, and many can process it to sound wider. However, true height effects only come from object-based tracks, so you will notice the difference most when playing titles that carry Atmos or DTS:X audio.
How do I know if my TV passes Atmos to the soundbar?
Check the TV manual or settings for eARC support and a passthrough or bitstream audio option. Then play an Atmos title from the TV’s own app and see if the soundbar displays an Atmos label. If it shows standard surround, adjust the TV audio output setting.
Where should a soundbar with upward-firing speakers go?
Place it on a shelf or stand directly below the TV with open space above and in front of it. Avoid enclosed cabinets. Follow the manufacturer’s guidance on distance from the ceiling, since very high or sloped ceilings can reduce the effect of bounced sound.
Is it better to buy a soundbar or a full surround system?
It depends on space and effort. A soundbar is simpler, tidier, and cheaper to set up. A receiver with separate speakers offers more precise placement and upgrade options but needs more space, wiring, and budget. Many people start with a bar and upgrade later if they want more.
Bottom Line
Choose a soundbar that supports the format your content uses.
More Soundbar Guides
- Best Soundbars
- Best Dolby Atmos Soundbars
- Best Soundbars Under $100
- Best Soundbars Under $200
- Best Soundbars Under $300
- Best Soundbars Under $500
- Best 5.1 Soundbars
- Best 2.1 Soundbars
- Best Soundbars with Wireless Subwoofer
- Best PC and Desktop Soundbars
- Best Gaming Soundbars
- Best Mini and Small Soundbars
- All soundbar guides
Related Guides
- 7 Best Dolby Atmos Soundbars: TCL, Samsung, Philips, Sonos (2026)
- 6 Best Soundbars for TV: Samsung, Philips, TCL, Polk (2026)
- 6 Best Soundbars Under $100: Cheap TV Speakers That Work (2026)
- 6 Best Soundbars Under $200: Philips, Hisense, TCL (2026)
- 6 Best Soundbars Under $300: Samsung, Philips, Polk, TCL (2026)


